Date   

Re: Auto-update version 3.50.403

Jim Altman
 

It also occurs with not needed gridsquares, i.e. to9w this morning, even though the gridsquare was in the udp message (debug window open), and give rise to a tooltip, it was not visible.  The invisible gridsquare also allowed me to send a cluster spot.  Hope this helps.

 

73

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Friday, December 6, 2019 6:12 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Auto-update version 3.50.403

 

Jim, I have seen this. Exactly what the cause is, I'm not sure (other than it's a bug). I'll continue to investigate. SeventyThree(s).

On December 6, 2019 at 7:02 AM Jim Altman <jaltman636@...> wrote:

Nice, thanks Bob.  I have noticed a couple times now that when a needed gridsquare gets highlighted the text of it disappears form the UDP bandmap.  I’ll keep watching for a reoccurrence.  The highlight remained.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Friday, December 6, 2019 6:42 AM
To: hamlogger@groups.io
Subject: [hamlogger] Auto-update version 3.50.403

 

... is on-line, and hopefully connections to Club Log are working again. For those who operate FT4/FT8 there is a new feature added to the UDP BandMap - You can now make DX Spots by right clicking on the GRIDSQUARE column of the decoded station. To enable/setup this feature, on the UDP BandMap click CONFIG | DX SPOT OPTIONS. The simple option adds the mode to the comments field. The formatted option adds the mode, signal level, gridsquare, and audio offset to the DX Spot. SeventyThree(s).

 

 


 


Re: Auto-update version 3.50.403

Bob
 

Jim, I have seen this. Exactly what the cause is, I'm not sure (other than it's a bug). I'll continue to investigate. SeventyThree(s).

On December 6, 2019 at 7:02 AM Jim Altman <jaltman636@...> wrote:

Nice, thanks Bob.  I have noticed a couple times now that when a needed gridsquare gets highlighted the text of it disappears form the UDP bandmap.  I’ll keep watching for a reoccurrence.  The highlight remained.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Friday, December 6, 2019 6:42 AM
To: hamlogger@groups.io
Subject: [hamlogger] Auto-update version 3.50.403

 

... is on-line, and hopefully connections to Club Log are working again. For those who operate FT4/FT8 there is a new feature added to the UDP BandMap - You can now make DX Spots by right clicking on the GRIDSQUARE column of the decoded station. To enable/setup this feature, on the UDP BandMap click CONFIG | DX SPOT OPTIONS. The simple option adds the mode to the comments field. The formatted option adds the mode, signal level, gridsquare, and audio offset to the DX Spot. SeventyThree(s).

 



 


To: Dales granddaughter Stephanie ...

Bob
 

Stephanie, sorry to hear about your grandfather. Condolences to you and your family for the thousands of radio hams who are at this mail address. If you have followed your grandfathers hobby Stephanie, you'll know we're a strange breed. We have friends and kindred spirits around the world. People we will never meet in person, but consider them close personal friends. Dale was one of us, he will be missed. Thanks for the courtesy of the update. Our best wishes to you and the family. Bob / K4CY.

On December 6, 2019 at 1:22 PM Dale M <dmess4391@...> wrote:

Hi, My name is Stephanie C.

I am Dale Messerschmidt's Granddaughter. I want to let you know on Monday Dec. 2 Dale passed away unexpectedly.

If you have any question. You can email me back here. I will check his email.

On 12/6/2019 0:09, Gary Hinson wrote:

I messed around with a USB SDR fed from the IF of my K3 for a couple of years.  It was OK but fiddly to set up.

 

Then I bought a 2nd K3 with a “free” P3 thrown in.  I was very dubious about its little screen … until I started using it.  Now I really miss it operating a plain K3 at the club. 

 

The little LCD display is bright and clear.  I have tried the VGA output on a large screen but it’s no better for me and just wastes desk space.

 

It shows lots of useful things:

  • My noise floor on different bands and antennas, and hour-by-hour variations
  • Where the signals are when I’m tuning across a quiet band hunting for signs of life
  • How much activity is there on FT8, FT4, RTTY or other digimode segments
  • Where DX stations are transmitting, and where they are working split, tuning through or jumping around in their pileups
  • Gaps in a busy band where I might CQ, or gaps in a DX pileup where I might call the DX.
  • QRN bursts – are they strong/frequent enough to make the band unusable, or only light & occasional?
  • QRM from radar, intruders, pirates, data crud from my station etc. – would it help to shift HF or LF to avoid them?
  • ‘Sweepers’ from the sun on an active high band, plus human tuners

 

The only thing I really miss from my SDR setup is the ability to overlay callsigns from cluster spots or Skimmer or (I guess) data decoders, on the waterfall.  It would be too much for the little P3 LCD but would be handy on a desktop screen.   [I used a Flex radio in CQ WW CW with a front-panel panadaptor display that could show callsigns: it was too crowded & busy for my liking, but then I only had a few hours in the dead of night during the contest to learn how to use the radio!]

 

So, all in all, I’m a convert.  The P3 has turned out to be a worthwhile addition to my station, more use than the 2nd K3 in fact!

 

The P3 box is mostly empty.  I’m tempted to separate out the LCD to fill a more convenient gap right in my eye-line rather than off to one side.  Maybe I’ll try adding a little external display instead.

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Dave Colliau
Sent: 06 December 2019 08:18
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 + FTdx-5000 + SDR Panadapter

 

Ive tried the RSP1,1a and the 2 . Didnt really excite me. I also fed the 9mhz out to the input of my 7300 ! . It worked .

I havent figured out why I need some fancy colored screen to show me who is on the band. I dont use the scope on the 7300 either. To each their own but it seems like just eye candy to sell radios. Being pretty much a dxer I just watch the spots .

There are options though.

Dave N8DC

 

---------- Original Message ----------
From: "Darren Collins (G0TSM)" <daz@...>
To: hamlogger@groups.io
Date: December 5, 2019 at 2:11 PM
Subject: Re: [hamlogger] Logger32 + FTdx-5000 + SDR Panadapter

I have an FTDX5000, LP-Pan 2 + Soundcard + NaP3/CW Skimmer. The CAT from the rig is shared (including to/from Logger32) via LPBridge.

If you just want to try a panadapter get one of those cheap SDRs you find on eBay/Amazon and feed it from the IF out on the back of the FTDX5000. You tune the SDR to 9MHz and you get a 'reversed display' ie if you are Rxing to USByou need to tune the SDR to LSB, well thats what I found.

SDR# (SDR Sharp) supports the cheap RTL-SDR USB devices and you can buy these with an HF down-converter. They're not very sensitive but they give you an idea of what you can see. Just don't buy an VHF only version.

I hardly use the NaP3 visual display expect during an SSB contest or looking at interference, but I use CW Skimmer all the time..

73 Darren G0TSM

 

On 05/12/19 13:16, Jim Ciurczak wrote:

As always Bob, thanks for your help and quick response.

Jim K2QB


 


 


Re: L32LogSync Update

Dale M <dmess4391@...>
 

Hi, My name is Stephanie C.

I am Dale Messerschmidt's Granddaughter. I want to let you know on Monday Dec. 2 Dale passed away unexpectedly.

If you have any question. You can email me back here. I will check his email.

On 12/6/2019 17:02, Rick Ellison wrote:
Due to the recent change at Clublog updating their security protocol I have
posted an update for L32LogSync on my website.
http://www.n2amg.com/software/l32-logsync/

Sometime in the next 24hours you should get an notice to auto-update or you
can go to the website and download it.
Besides correcting the ClubLog changes this also finishes the re-write of
the Built in FTP application. I have some minor issues to handle but they
have nothing to do with the operation of the FTP portion of the program.

73 Rick N2AMG



Re: Logger32 + FTdx-5000 + SDR Panadapter

Dale M <dmess4391@...>
 

Hi, My name is Stephanie C.

I am Dale Messerschmidt's Granddaughter. I want to let you know on Monday Dec. 2 Dale passed away unexpectedly.

If you have any question. You can email me back here. I will check his email.

On 12/6/2019 0:09, Gary Hinson wrote:

I messed around with a USB SDR fed from the IF of my K3 for a couple of years.  It was OK but fiddly to set up.

 

Then I bought a 2nd K3 with a “free” P3 thrown in.  I was very dubious about its little screen … until I started using it.  Now I really miss it operating a plain K3 at the club. 

 

The little LCD display is bright and clear.  I have tried the VGA output on a large screen but it’s no better for me and just wastes desk space.

 

It shows lots of useful things:

  • My noise floor on different bands and antennas, and hour-by-hour variations
  • Where the signals are when I’m tuning across a quiet band hunting for signs of life
  • How much activity is there on FT8, FT4, RTTY or other digimode segments
  • Where DX stations are transmitting, and where they are working split, tuning through or jumping around in their pileups
  • Gaps in a busy band where I might CQ, or gaps in a DX pileup where I might call the DX.
  • QRN bursts – are they strong/frequent enough to make the band unusable, or only light & occasional?
  • QRM from radar, intruders, pirates, data crud from my station etc. – would it help to shift HF or LF to avoid them?
  • ‘Sweepers’ from the sun on an active high band, plus human tuners

 

The only thing I really miss from my SDR setup is the ability to overlay callsigns from cluster spots or Skimmer or (I guess) data decoders, on the waterfall.  It would be too much for the little P3 LCD but would be handy on a desktop screen.   [I used a Flex radio in CQ WW CW with a front-panel panadaptor display that could show callsigns: it was too crowded & busy for my liking, but then I only had a few hours in the dead of night during the contest to learn how to use the radio!]

 

So, all in all, I’m a convert.  The P3 has turned out to be a worthwhile addition to my station, more use than the 2nd K3 in fact!

 

The P3 box is mostly empty.  I’m tempted to separate out the LCD to fill a more convenient gap right in my eye-line rather than off to one side.  Maybe I’ll try adding a little external display instead.

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Dave Colliau
Sent: 06 December 2019 08:18
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 + FTdx-5000 + SDR Panadapter

 

Ive tried the RSP1,1a and the 2 . Didnt really excite me. I also fed the 9mhz out to the input of my 7300 ! . It worked .

I havent figured out why I need some fancy colored screen to show me who is on the band. I dont use the scope on the 7300 either. To each their own but it seems like just eye candy to sell radios. Being pretty much a dxer I just watch the spots .

There are options though.

Dave N8DC

 

---------- Original Message ----------
From: "Darren Collins (G0TSM)" <daz@...>
To: hamlogger@groups.io
Date: December 5, 2019 at 2:11 PM
Subject: Re: [hamlogger] Logger32 + FTdx-5000 + SDR Panadapter

I have an FTDX5000, LP-Pan 2 + Soundcard + NaP3/CW Skimmer. The CAT from the rig is shared (including to/from Logger32) via LPBridge.

If you just want to try a panadapter get one of those cheap SDRs you find on eBay/Amazon and feed it from the IF out on the back of the FTDX5000. You tune the SDR to 9MHz and you get a 'reversed display' ie if you are Rxing to USByou need to tune the SDR to LSB, well thats what I found.

SDR# (SDR Sharp) supports the cheap RTL-SDR USB devices and you can buy these with an HF down-converter. They're not very sensitive but they give you an idea of what you can see. Just don't buy an VHF only version.

I hardly use the NaP3 visual display expect during an SSB contest or looking at interference, but I use CW Skimmer all the time..

73 Darren G0TSM

 

On 05/12/19 13:16, Jim Ciurczak wrote:

As always Bob, thanks for your help and quick response.

Jim K2QB


 


L32LogSync Update

Rick Ellison
 

Due to the recent change at Clublog updating their security protocol I have
posted an update for L32LogSync on my website.
http://www.n2amg.com/software/l32-logsync/

Sometime in the next 24hours you should get an notice to auto-update or you
can go to the website and download it.
Besides correcting the ClubLog changes this also finishes the re-write of
the Built in FTP application. I have some minor issues to handle but they
have nothing to do with the operation of the FTP portion of the program.

73 Rick N2AMG


Re: Auto-update version 3.50.403

Jim Altman
 

Nice, thanks Bob.  I have noticed a couple times now that when a needed gridsquare gets highlighted the text of it disappears form the UDP bandmap.  I’ll keep watching for a reoccurrence.  The highlight remained.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Friday, December 6, 2019 6:42 AM
To: hamlogger@groups.io
Subject: [hamlogger] Auto-update version 3.50.403

 

... is on-line, and hopefully connections to Club Log are working again. For those who operate FT4/FT8 there is a new feature added to the UDP BandMap - You can now make DX Spots by right clicking on the GRIDSQUARE column of the decoded station. To enable/setup this feature, on the UDP BandMap click CONFIG | DX SPOT OPTIONS. The simple option adds the mode to the comments field. The formatted option adds the mode, signal level, gridsquare, and audio offset to the DX Spot. SeventyThree(s).


Auto-update version 3.50.403

Bob
 

... is on-line, and hopefully connections to Club Log are working again. For those who operate FT4/FT8 there is a new feature added to the UDP BandMap - You can now make DX Spots by right clicking on the GRIDSQUARE column of the decoded station. To enable/setup this feature, on the UDP BandMap click CONFIG | DX SPOT OPTIONS. The simple option adds the mode to the comments field. The formatted option adds the mode, signal level, gridsquare, and audio offset to the DX Spot. SeventyThree(s).


Can't access Club Log?

Bob
 

Seems that Club Log has made security updates. I have made changes to Logger32, and it is working again (for me). The modifications are with the Beta testers. An auto-update will be released in a day or two. SeventyThree(s).


Re: Logger32 + FTdx-5000 + SDR Panadapter

Gary Hinson
 

I messed around with a USB SDR fed from the IF of my K3 for a couple of years.  It was OK but fiddly to set up.

 

Then I bought a 2nd K3 with a “free” P3 thrown in.  I was very dubious about its little screen … until I started using it.  Now I really miss it operating a plain K3 at the club. 

 

The little LCD display is bright and clear.  I have tried the VGA output on a large screen but it’s no better for me and just wastes desk space.

 

It shows lots of useful things:

  • My noise floor on different bands and antennas, and hour-by-hour variations
  • Where the signals are when I’m tuning across a quiet band hunting for signs of life
  • How much activity is there on FT8, FT4, RTTY or other digimode segments
  • Where DX stations are transmitting, and where they are working split, tuning through or jumping around in their pileups
  • Gaps in a busy band where I might CQ, or gaps in a DX pileup where I might call the DX.
  • QRN bursts – are they strong/frequent enough to make the band unusable, or only light & occasional?
  • QRM from radar, intruders, pirates, data crud from my station etc. – would it help to shift HF or LF to avoid them?
  • ‘Sweepers’ from the sun on an active high band, plus human tuners

 

The only thing I really miss from my SDR setup is the ability to overlay callsigns from cluster spots or Skimmer or (I guess) data decoders, on the waterfall.  It would be too much for the little P3 LCD but would be handy on a desktop screen.   [I used a Flex radio in CQ WW CW with a front-panel panadaptor display that could show callsigns: it was too crowded & busy for my liking, but then I only had a few hours in the dead of night during the contest to learn how to use the radio!]

 

So, all in all, I’m a convert.  The P3 has turned out to be a worthwhile addition to my station, more use than the 2nd K3 in fact!

 

The P3 box is mostly empty.  I’m tempted to separate out the LCD to fill a more convenient gap right in my eye-line rather than off to one side.  Maybe I’ll try adding a little external display instead.

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Dave Colliau
Sent: 06 December 2019 08:18
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 + FTdx-5000 + SDR Panadapter

 

Ive tried the RSP1,1a and the 2 . Didnt really excite me. I also fed the 9mhz out to the input of my 7300 ! . It worked .

I havent figured out why I need some fancy colored screen to show me who is on the band. I dont use the scope on the 7300 either. To each their own but it seems like just eye candy to sell radios. Being pretty much a dxer I just watch the spots .

There are options though.

Dave N8DC

 

---------- Original Message ----------
From: "Darren Collins (G0TSM)" <daz@...>
To: hamlogger@groups.io
Date: December 5, 2019 at 2:11 PM
Subject: Re: [hamlogger] Logger32 + FTdx-5000 + SDR Panadapter

I have an FTDX5000, LP-Pan 2 + Soundcard + NaP3/CW Skimmer. The CAT from the rig is shared (including to/from Logger32) via LPBridge.

If you just want to try a panadapter get one of those cheap SDRs you find on eBay/Amazon and feed it from the IF out on the back of the FTDX5000. You tune the SDR to 9MHz and you get a 'reversed display' ie if you are Rxing to USByou need to tune the SDR to LSB, well thats what I found.

SDR# (SDR Sharp) supports the cheap RTL-SDR USB devices and you can buy these with an HF down-converter. They're not very sensitive but they give you an idea of what you can see. Just don't buy an VHF only version.

I hardly use the NaP3 visual display expect during an SSB contest or looking at interference, but I use CW Skimmer all the time..

73 Darren G0TSM

 

On 05/12/19 13:16, Jim Ciurczak wrote:

As always Bob, thanks for your help and quick response.

Jim K2QB


 


Re: Logger32 + FTdx-5000 + SDR Panadapter

Jim Ciurczak
 

Thanks Dave. Well I am in the same boat as you pretty much. I'm not sue I really need one so not sure if I am willing to put out the expenditure plus the time needed to get it all working for what it really does. I had one working on my FT2000, not fully integrated with my Logger and it really didn't excite me that much. But I figured Santa has been asking me what I want and I have been a good boy....

73 de Jim K2QB


Re: Logger32 + FTdx-5000 + SDR Panadapter

Dave Colliau
 

Ive tried the RSP1,1a and the 2 . Didnt really excite me. I also fed the 9mhz out to the input of my 7300 ! . It worked .
I havent figured out why I need some fancy colored screen to show me who is on the band. I dont use the scope on the 7300 either. To each their own but it seems like just eye candy to sell radios. Being pretty much a dxer I just watch the spots .
There are options though.
Dave N8DC

---------- Original Message ----------
From: "Darren Collins (G0TSM)" <daz@...>
To: hamlogger@groups.io
Date: December 5, 2019 at 2:11 PM
Subject: Re: [hamlogger] Logger32 + FTdx-5000 + SDR Panadapter

I have an FTDX5000, LP-Pan 2 + Soundcard + NaP3/CW Skimmer. The CAT from the rig is shared (including to/from Logger32) via LPBridge.

If you just want to try a panadapter get one of those cheap SDRs you find on eBay/Amazon and feed it from the IF out on the back of the FTDX5000. You tune the SDR to 9MHz and you get a 'reversed display' ie if you are Rxing to USByou need to tune the SDR to LSB, well thats what I found.

SDR# (SDR Sharp) supports the cheap RTL-SDR USB devices and you can buy these with an HF down-converter. They're not very sensitive but they give you an idea of what you can see. Just don't buy an VHF only version.

I hardly use the NaP3 visual display expect during an SSB contest or looking at interference, but I use CW Skimmer all the time..

73 Darren G0TSM


On 05/12/19 13:16, Jim Ciurczak wrote:
As always Bob, thanks for your help and quick response.

Jim K2QB

 


Re: Logger32 + FTdx-5000 + SDR Panadapter

Darren Collins (G0TSM)
 

I have an FTDX5000, LP-Pan 2 + Soundcard + NaP3/CW Skimmer. The CAT from the rig is shared (including to/from Logger32) via LPBridge.

If you just want to try a panadapter get one of those cheap SDRs you find on eBay/Amazon and feed it from the IF out on the back of the FTDX5000. You tune the SDR to 9MHz and you get a 'reversed display' ie if you are Rxing to USByou need to tune the SDR to LSB, well thats what I found.

SDR# (SDR Sharp) supports the cheap RTL-SDR USB devices and you can buy these with an HF down-converter. They're not very sensitive but they give you an idea of what you can see. Just don't buy an VHF only version.

I hardly use the NaP3 visual display expect during an SSB contest or looking at interference, but I use CW Skimmer all the time..

73 Darren G0TSM


On 05/12/19 13:16, Jim Ciurczak wrote:
As always Bob, thanks for your help and quick response.

Jim K2QB


Re: Logger32 + FTdx-5000 + SDR Panadapter

Jim Ciurczak
 

As always Bob, thanks for your help and quick response.

Jim K2QB


Re: Logger32 + FTdx-5000 + SDR Panadapter

Bob
 

JIm, in theory, you buy a cheap (relatively speaking) SDR seeing as all you're only looking for is to use it for the eye candy. So, IMHO, pick one with the eye candy that suits you. You connect it to the slave port of Logger32. Turn the dial of your boat anchor, and the eye candy follows. This has been implements by many Logger32 users, but I'd suggest you don't hold your breath for response to your query. This reflector has the worst case of one-way-skip. The only setup needed is configure the slave port to match whatever radio your SDR emulates, then also to match radio modes between your boat anchor and the SDR ... for example, the boat anchor may have CW modes of CW-L and CW-U and the SDR may only have a mode CW. There's a configuration option that lets you map the two radio so they understand each other. One last thing, once you get hooked on the eye candy, you'll be glad to hear that it is not simply a slave receiver. Change the SDR mode/frequency and the boat anchor will follow. Good luck. SeventyThree(s).

On December 4, 2019 at 8:18 AM Jim Ciurczak <nfjimc@...> wrote:

Contemplating buying and installing an SDR to use as a Panadapter but would like to chat within anyone who is currently doing this. Doesn't need to be a FTdx-5000, any rig would probably help me out. Not being a computer wiz, I am trying to figure out exactly what I would need and whether once installed everything would continue to work as it currently does. Meaning being able to launch WSJT-X from within Logger32 and having both apps and the SDR work together to control the rig, log any contacts etc. From what I am able to discern I would need the SDR and possibly another sound card, some port splitting software and some other rig control software. 
I would love to chat with someone off line about exactly how to do all of this. Thanks!

Jim K2QB

 


Logger32 + FTdx-5000 + SDR Panadapter

Jim Ciurczak
 

Contemplating buying and installing an SDR to use as a Panadapter but would like to chat within anyone who is currently doing this. Doesn't need to be a FTdx-5000, any rig would probably help me out. Not being a computer wiz, I am trying to figure out exactly what I would need and whether once installed everything would continue to work as it currently does. Meaning being able to launch WSJT-X from within Logger32 and having both apps and the SDR work together to control the rig, log any contacts etc. From what I am able to discern I would need the SDR and possibly another sound card, some port splitting software and some other rig control software. 
I would love to chat with someone off line about exactly how to do all of this. Thanks!

Jim K2QB


Re: Statistics

Panos
 

Very thank you Bob. Maybe I requested this feature because I was an accountant 73


Re: Spot display 6600M

Bob
 

I did EXACTLY what I said. No, backup copies, no file renames, no reboots, no re-registers. 73.

On December 2, 2019 at 8:05 PM rodman@... wrote:

Bob, thanks.  I am glad it works for you.  Did you do anything with the register link you sent me, by the way????  I am at the station right now and will try again.

 


Re: Download issue

Bob
 

Phill, after yet another glass of excellent Scotch, it occurs to me that the problem may still be related to a 'French connection', but something entirely different to my previous offering ... I'm the first to acknowledge that groups.io has been very erratic recently ... Let me float this conspiracy theory instead ...  .IO is (or more correctly was) the top-demain for the BIOT (British Indian Ocean Territories). Effective a couple of days ago, the UN (based on the infinite wisdom of the International Court of Justice in the Hague) has decreed that the 58 islands are no longer under the governance of the UK, but Mauritius. So, what we are experiencing the transition from groups.io to groups.mu. We live in exciting times. SeventyThree(s).

On December 2, 2019 at 12:12 PM "Phill Morris (G6EES)" <Phill.morris@...> wrote:

John

I use Outlook and all Groups.io emails are getting through o.k. (as far as i know!)

Phill G6EES


-------- Original message --------
From: "John Pink via Groups.Io" <john_pink@...>
Date: 02/12/2019 17:08 (GMT+00:00)
To: hamlogger@groups.io
Subject: [hamlogger] Download issue

Hi Guys

Not a L32 issue – I think it is a ‘@groups.io’ problem.  I see many messages in my webmail box BUT, none get through into Outlook when I download.

 

Has anybody else seen this issue?

 

John


 


Re: Statistics

Bob
 

Of the many thousands of users, you're the first to request this feature/function. I'll add it to the VERY long list of requests for enhancement. SeventyThree(s).

On December 2, 2019 at 2:18 PM Panos <sv1grn@...> wrote:

Thanks Jim. please Bob add this feature whenever its possible thanks 73