Date   

Re: Spot display 6600M

David KN2M
 

Bob, thanks.  I am glad it works for you.  Did you do anything with the register link you sent me, by the way????  I am at the station right now and will try again.


Re: Statistics

Panos
 

Thanks Jim. please Bob add this feature whenever its possible thanks 73


Re: Spot display 6600M

Bob
 

To make sure we were on the same page, I downloaded the HxD editor. Added ports 20 & 21 to the PC. Modified the SYSWOW64 copy of MSCOMM32.OCX (I'm running 64 bit Win 10) like this:


HxD automatically saved a before copy for me. I opened Logger32 and went to setup the radio serial port. I see this:

 

5 minutes tops. No backup copies, file moving, rebooting, or re-registering. SeventyThree(s). Enjoy.

On December 1, 2019 at 10:33 PM rodman@... wrote:

register? 

 


Re: Download issue

Phill Morris (G6EES)
 

John

I use Outlook and all Groups.io emails are getting through o.k. (as far as i know!)

Phill G6EES


-------- Original message --------
From: "John Pink via Groups.Io" <john_pink@...>
Date: 02/12/2019 17:08 (GMT+00:00)
To: hamlogger@groups.io
Subject: [hamlogger] Download issue

Hi Guys

Not a L32 issue – I think it is a ‘@groups.io’ problem.  I see many messages in my webmail box BUT, none get through into Outlook when I download.

 

Has anybody else seen this issue?

 

John


Download issue

John Pink
 

Hi Guys

Not a L32 issue – I think it is a ‘@groups.io’ problem.  I see many messages in my webmail box BUT, none get through into Outlook when I download.

 

Has anybody else seen this issue?

 

John


Test

John Pink
 

Please ignore!


Test

John Pink
 

From JP


Re: Statistics

Jim Hargrave
 

Logger32 does not support partial stats. However, you can do this with a little work.

 

1)      Export your logbook to Adif file; select “Partial Log’ with dates: “Jan 1, 2003 include Dec 31, 2018”

2)      Name the file “Log 2003-2018.ADI”

3)      Select FILE > Change logbook

4)      Name it “2003 to 2018”. This will open a blank logbook.

5)      Import your partial logbook and run re-cal.

6)      Now you can view stats for those years

7)      Save the logbook files for future use.

8)      Reinstall your complete logbook and you’re ready to operate again.

        

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Panos
Sent: Monday, December 2, 2019 6:11 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Statistics

 

Complete logbook option shows statistics for the complete logbook. The question is how I can extract statistics for a period (from the beginning -2033 for me- to 2017 or 2018 etc. 73


Re: Statistics

Bob
 

You can not. SeventyThree(s).

On December 2, 2019 at 7:11 AM Panos <sv1grn@...> wrote:

Complete logbook option shows statistics for the complete logbook. The question is how I can extract statistics for a period (from the beginning -2033 for me- to 2017 or 2018 etc. 73

 


Re: Statistics

Panos
 

I mean 2003 hihi


Re: Statistics

Kenneth Hansen
 

Are you from the future?

On Mon, Dec 2, 2019 at 7:11 AM Panos <sv1grn@...> wrote:
Complete logbook option shows statistics for the complete logbook. The question is how I can extract statistics for a period (from the beginning -2033 for me- to 2017 or 2018 etc. 73

--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC


Re: Statistics

Panos
 

Complete logbook option shows statistics for the complete logbook. The question is how I can extract statistics for a period (from the beginning -2033 for me- to 2017 or 2018 etc. 73


Re: Statistics

Bob
 

Try the COMPLETE LOGBOOK option. SeventyThree(s).


On December 2, 2019 at 3:06 AM Panos <sv1grn@...> wrote:

Hi dear friends, in the awards / dxcc screen the complete logbook option contains statistics from the whole logbook. Other options persist for yearly statistics. But this yearly results are only for the chosen year.  How I can extract cumulative results without using external programmes? For example when choosing 2018 I need to see cumulative statistics from the beginning of my log including 2018. Is there any solution? Thanks 73


 


Re: Spot display 6600M

Bob
 

On December 1, 2019 at 10:33 PM rodman@... wrote:

register? 

 


Statistics

Panos
 

Hi dear friends, in the awards / dxcc screen the complete logbook option contains statistics from the whole logbook. Other options persist for yearly statistics. But this yearly results are only for the chosen year.  How I can extract cumulative results without using external programmes? For example when choosing 2018 I need to see cumulative statistics from the beginning of my log including 2018. Is there any solution? Thanks 73


Re: Spot display 6600M

David KN2M
 

register? 


Re: FTDX 3000

Steve Sawyer
 

Have not seen anyone answer you so will say this.  When the FTDX 5000 came out I had to use the FT 2000 in Logger 32 until they added the 5000.  I would say tell your friend to use either the 2000 or 5000.

Steve (KT0DX)

On 12/1/2019 21:38, Dave Colliau wrote:
Whats everyone using for a rig in logger 32 to make the 3000 work with cat control.
Asking for a friend .. Really
Dave N8DC


Re: FTDX 3000

Dave Colliau
 

Whats everyone using for a rig in logger 32 to make the 3000 work with cat control.
Asking for a friend .. Really
Dave N8DC


Re: trouble with dx spots window

ja1nlx
 

Hello

FT8/WSJT

I do not know what TRX you are using and how you connect audio between
PC and TRX.
Re-check soundcard selection in WSJT setting taable and re-check sound in
device in TRX.

CW machine

I do not know what mode you select in CW machine. I do not know how you connect
CW keying cable between TRX and PC.
There are 3 selectable options in CW machine. Which is selected ?

More details are needed for us to answer....

73

On 2019/12/02 1:16, Matthias Bellmann wrote:
Hi
i am using a new computer win 10 prof. as administrator.
Now i am trying to make logger32 3.50.402 work as it was before. 
There are several problems:
 
1. FT8 / WSJT
The trcvr does not respond to the sound card out signal. PTT works, wsjt is reveiving.
 
 
2. CW machine similar problem. PTT works, cw machine is keying,but cw signal is ignored by trcvr. Use COM1 (real serial) und com4 (USB). Always same result. Did test every possible combination in the cw machine keyer setup. There muzst be something i did not realize.
 
3. I am connected with telnet dx-cluster. It works fine. dx spots are displayed in the telnet window but dx spots windows remains empty. Only WWV announcement and ann messages are displayed. All blocking filter in are disabled. 
 
PLEASE NO ANSWER "read help file". I did read help for many hours and did try many settings, now i gave up.
 
Any answer well be appreciated.
 
 
 
--
73 de aki
JA1NLX


Re: Spot display 6600M

Bob
 

... other then the need for a reboot and possibly re-register as mentioned before), nothing comes to mind. 73.

On December 1, 2019 at 2:29 PM rodman@... wrote:

Bob, I DID rename the modified file to reflect the original expected name.  When I did this, Logger32 would not run.  When I renamed the original file to MSComm32.Ocx, (and changed the new modified file name so that there would not be two files with the same name) the program loaded and operated as before.  In your experience, this isn't some stupid thing like the file needs a registry hack to repoint to the new file location and remove traces of the original is it?  Thanks.

 

3701 - 3720 of 81929