Date   

Re: FT8 in worked/confirmed

KX2A
 

Bob,

It just dawned on me to try DIG.  That works, and now there is a column called DIG.  In my case, it means FT8.

73,
Jan, KX2A


Re: FT8 in worked/confirmed

KX2A
 

Bob,

I used the term RTTY, since, once upon a time, that was the ARRL's alternative for all digital modes.  Things have changed, and I found, after much hunting, this document page:

https://www.adif.org/310/ADIF_310.htm#Mode_Enumeration

It includes many new digital modes, but FT-8 and FT-4 are not among them.  Can you suggest what mode I should use?

BTW, I, too, regret the demise of PSK, which I think was the next best thing to Pactor.  I did use Pactor (-1), and liked it, especially its accuracy.  I understand the new versions (2, 3, 4) are much better, but the price tag of thousands to multi thousands for a TNC would scar my cheapskate soul.  Couldn't they have put some of the old versions into the public domain?  I mean, did you realize that there are people who write full-fledged logging plus radio-control programs, maintain them, and still give them away? Of course those people must be socialists or hippies.

73,

Jan, KX2A (now 76)


Re: L32LogSync

Rick Ellison
 

Hi Larry..
Make sure you check your paths to L32Lookups.exe if Logger32 can find it should load it. It could also be a privilege thing. Are you running Logger32 using the Run as Administrator setting?? If so the the Lookup needs to be run using the same setting..

73 Rick N2AMG


Re: FT8 in worked/confirmed

Bob
 

... or, if you really want to include FT8 in your overall digital stats, you can click CONFIG on the UDP BandMap. and UNcheck the option HIGHLIGHT CALLS/GRIDS AS 'DIG' MODE. This doesn't give you an FT8 column on the Worked/Confirmed Window, but highlight colors and tooltip text on the UDP BandMap reflect Want/Need for FT8. SeventyThree(s).

On November 26, 2019 at 5:38 PM Bob <k4cy@...> wrote:


Click TOOLS | DATABASE MAINTENANCE | SETUP PHONE/DIGITAL MODES. On the list of modes to be included as DIGITAL, UNcheck FT8. You will be asked to recalculate stats. SeventyThree(s).

On November 26, 2019 at 3:59 PM KX2A <ditzian@...> wrote:


John - G7SSE

Mea Culpa, my typo, FT8 is in the 20 meter row, and yes, there is a Y in
the stats column for 20 meter, FT8.  The Radio Mode is RTTY, as it is
for all modes that use TX DATA in my K3.  So my question stands.

73,
Jan, KX2A




Re: FT8 in worked/confirmed

Bob
 

Click TOOLS | DATABASE MAINTENANCE | SETUP PHONE/DIGITAL MODES. On the list of modes to be included as DIGITAL, UNcheck FT8. You will be asked to recalculate stats. SeventyThree(s).

On November 26, 2019 at 3:59 PM KX2A <ditzian@...> wrote:


John - G7SSE

Mea Culpa, my typo, FT8 is in the 20 meter row, and yes, there is a Y in
the stats column for 20 meter, FT8.  The Radio Mode is RTTY, as it is
for all modes that use TX DATA in my K3.  So my question stands.

73,
Jan, KX2A



Re: Please Help: Logger 32 Stopped Working

Bob
 

... and somewhere between version 3.50.367 and 3.50.403 there was a database change to support the ADIF MODE/SUBMODE concept. As part of the update, a Recalculation of Statistics was required. If/when you are able to get Logger32 running again (regardless of which version), I recommend you Recalculate your logbook stats. SeventyThree(s).

On November 26, 2019 at 3:12 PM Bob <k4cy@...> wrote:

The first thing to do is don't panic. If necessary, put a paper bag over your head and breathe deeply. Panicing will cause you to do silly things ... Was this error a one of occurrence? Did you try again with the same result? Try this ... Edit the Logger32.INI file with NotePad. Find this entry [Globals]  Somewhere below this you will find  Enable Club Log Auto Update=True change it to  Enable Club Log Auto Update=False  Save the change and close NotePad. What you have done is disable the Club Log exceptions lookup so that with luck Logger32 will run now.  As to what the actual problem is, I have no idea. But I encourage you to go back to the latest version (3.50.142) it is much more stable and has numerous bug fixes. SeventyThree(s).
On November 26, 2019 at 1:05 PM germdoc@... wrote:

Please Note: I'm a "new kid on the block" and not very tech savvy so please be gentle. LOL I have been running the 3.50.367 version without any difficulties. At the urging ( and against my rule if it's working, just leave it alone) of a friend I attempted yesterday to update to the latest version. I was not happy with it as it just didn't seem to work properly. So I went into Tools and went back to my prior 3.50.367 version. It seemed to work OK just as it always did. However today  when I attempted to open up my Logger 32 it would briefly open and start the "Exceptions" then a popup showed saying "Logger 32 has stopped working. a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." It would not let me do anything other than close out the program. I do backup my logs every Sunday on thumb drives in duplicate, and my entire computer gets backed up on an external drive. I am looking for advise on how best to rectify this situation. Not being very tech savvy I'm in a bit of a panic even though I believe I'm backed up. Please help and advise. Thank you ever so much......Mitch KI4TSI 

 

 


Re: FT8 in worked/confirmed

KX2A
 

John - G7SSE

Mea Culpa, my typo, FT8 is in the 20 meter row, and yes, there is a Y in the stats column for 20 meter, FT8.  The Radio Mode is RTTY, as it is for all modes that use TX DATA in my K3.  So my question stands.

73,
Jan, KX2A


Re: Please Help: Logger 32 Stopped Working

Bob
 

The first thing to do is don't panic. If necessary, put a paper bag over your head and breathe deeply. Panicing will cause you to do silly things ... Was this error a one of occurrence? Did you try again with the same result? Try this ... Edit the Logger32.INI file with NotePad. Find this entry [Globals]  Somewhere below this you will find  Enable Club Log Auto Update=True change it to  Enable Club Log Auto Update=False  Save the change and close NotePad. What you have done is disable the Club Log exceptions lookup so that with luck Logger32 will run now.  As to what the actual problem is, I have no idea. But I encourage you to go back to the latest version (3.50.142) it is much more stable and has numerous bug fixes. SeventyThree(s).

On November 26, 2019 at 1:05 PM germdoc@... wrote:

Please Note: I'm a "new kid on the block" and not very tech savvy so please be gentle. LOL I have been running the 3.50.367 version without any difficulties. At the urging ( and against my rule if it's working, just leave it alone) of a friend I attempted yesterday to update to the latest version. I was not happy with it as it just didn't seem to work properly. So I went into Tools and went back to my prior 3.50.367 version. It seemed to work OK just as it always did. However today  when I attempted to open up my Logger 32 it would briefly open and start the "Exceptions" then a popup showed saying "Logger 32 has stopped working. a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." It would not let me do anything other than close out the program. I do backup my logs every Sunday on thumb drives in duplicate, and my entire computer gets backed up on an external drive. I am looking for advise on how best to rectify this situation. Not being very tech savvy I'm in a bit of a panic even though I believe I'm backed up. Please help and advise. Thank you ever so much......Mitch KI4TSI 

 


Please Help: Logger 32 Stopped Working

germdoc@...
 

Please Note: I'm a "new kid on the block" and not very tech savvy so please be gentle. LOL I have been running the 3.50.367 version without any difficulties. At the urging ( and against my rule if it's working, just leave it alone) of a friend I attempted yesterday to update to the latest version. I was not happy with it as it just didn't seem to work properly. So I went into Tools and went back to my prior 3.50.367 version. It seemed to work OK just as it always did. However today  when I attempted to open up my Logger 32 it would briefly open and start the "Exceptions" then a popup showed saying "Logger 32 has stopped working. a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." It would not let me do anything other than close out the program. I do backup my logs every Sunday on thumb drives in duplicate, and my entire computer gets backed up on an external drive. I am looking for advise on how best to rectify this situation. Not being very tech savvy I'm in a bit of a panic even though I believe I'm backed up. Please help and advise. Thank you ever so much......Mitch KI4TSI 


Re: L32LogSync

larry fields
 

hello Rick 

mine is acting up again, saying it can't find the QRZ Module is there a way to fix this part. I noticed it recently after adding some SSTV QSO.

Thanks and 73
Larry Fields: du1/n6hpx
Manila PHILIPPINES
n6hpx/du1@...

Retired looking for more work
Office:(63)46-571-5687
cell:    (63)916-756-7781
=====================================================
member:
American Radio Relay League W1AW
Philippine Amatuer Radio Association DX1PAR
Philippine Radio Pyramid Society DX1PRS 
=====================================================
owner:
=======================================================
LICENSED HAM RADIO OP:
DX1PRS GROUP 145.340 mhz & 7165 khz
DX1PAR HF NET  7095.00 khz
(0900,1100 & 2300 utc)
========================================================
DU1/N6HPX:QRX DX1PAR 7095
DX1PRS 7165 khz evening
DX1PRS 145.340 mhz
DX1L 431.9,
SIMPLEX 144.6, 145.600
2M 144.225 SSB ,
APRS n6hpx(-08)
=============================================================
SATELLITE:
APRS N6HPX-2 GATEWAY













On Mon, Nov 25, 2019 at 11:41 PM Bob <k4cy@...> wrote:
Oh no Rick, what have you done? More eye candy? Everyone is gonna want TQSL pop-ups now ... On the 30th day of Christmas my true love sent to me a TQSL pop-up ... etc ... etc ... I use Ad Blocker Plus, it blocks most embedded ads and unwanted pop-ups :) SeventyThree(s).

> On November 25, 2019 at 1:57 PM "jim watkins via Groups.Io" <james_vo1sf=yahoo.ca@groups.io> wrote:
>
>
> I assume this is pointing to Rick, not the Logger32 group.
>
> I have been off the air for a couple weeks, but got a chance to play with the radio on the weekend. When I open up Logger32, I get 3 windows that pop up;
>
> 1- L32LogSync (but is states (not Responding))
> 2-TQSL
> 3 - Select Station Location for Signing.
>
>  I use Task Manager to close L32LogSync. I want to send my updates to EQSL and LOTW, but now can't
>
> Why Am I getting TQSL window open, and how do I stop it from opening.
>
> 73s
>
> Jim Watkins
>
>
> VA3XOV / VO1SF
>
> Never drive faster than your Guardian Angel can fly..
>
>
>




Re: L32LogSync

Bob
 

Oh no Rick, what have you done? More eye candy? Everyone is gonna want TQSL pop-ups now ... On the 30th day of Christmas my true love sent to me a TQSL pop-up ... etc ... etc ... I use Ad Blocker Plus, it blocks most embedded ads and unwanted pop-ups :) SeventyThree(s).

On November 25, 2019 at 1:57 PM "jim watkins via Groups.Io" <james_vo1sf=yahoo.ca@groups.io> wrote:


I assume this is pointing to Rick, not the Logger32 group.

I have been off the air for a couple weeks, but got a chance to play with the radio on the weekend. When I open up Logger32, I get 3 windows that pop up;

1- L32LogSync (but is states (not Responding))
2-TQSL
3 - Select Station Location for Signing.

I use Task Manager to close L32LogSync. I want to send my updates to EQSL and LOTW, but now can't

Why Am I getting TQSL window open, and how do I stop it from opening.

73s

Jim Watkins


VA3XOV / VO1SF

Never drive faster than your Guardian Angel can fly..



Re: L32LogSync

Rick Ellison
 

Hi Jim
Instead of trying to guess at why you are getting the no response from LogSync. If you would do this. Open Logsync by itself use explorer and mode to the directory where it is install and double click on it. When it opens up click on the top menu Info then select Debug then Debug On.
Now close LogSync. While you are in the same directory as LogSync delete the file called DebugLog.txt if it is located in the directory.

Now Load Logger32 as you normally would and open LogSync. ( I usually add logsync to one of the utility menus so I load LogSync via a menu option. After it loads and it stops responding close LogSync out. Now in the directory where LogSync is installed there will be a file called DebugLog.txt send that to me as an attachment...

As for TQSL Do you have that loaded into a utility menu that is auto started when Logger32 loads?? If so stop the auto loading.

As for the Station signing window I would need a screenshot of the window to determine where its coming from. I am guessing that you have not setup a station location in TQSL and Logsync is telling you that you need to select one from LogSyncs dropdown window for you to tell the program which location file you want to use.

Send me the DebugLog file and we will go from there..

73 Rick n2AMG

-----Original Message-----
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of jim watkins via Groups.Io
Sent: Monday, November 25, 2019 1:58 PM
To: Hamlogger <hamlogger@groups.io>
Subject: [hamlogger] L32LogSync

I assume this is pointing to Rick, not the Logger32 group.

I have been off the air for a couple weeks, but got a chance to play with the radio on the weekend. When I open up Logger32, I get 3 windows that pop up;

1- L32LogSync (but is states (not Responding)) 2-TQSL
3 - Select Station Location for Signing.

I use Task Manager to close L32LogSync. I want to send my updates to EQSL and LOTW, but now can't

Why Am I getting TQSL window open, and how do I stop it from opening.

73s

Jim Watkins


VA3XOV / VO1SF

Never drive faster than your Guardian Angel can fly..


Re: FT8 in worked/confirmed

Bob
 

If FT8 is defined as a digital mode, then the answer to your question is no. If FT8 is NOT defined as a digital mode, then it will have its own column in the worked/confirmed window. SeventyThree(s).

On November 25, 2019 at 12:24 PM John Munton - G7SSE <johng7sse@...> wrote:

Jan, do you have a Y in the Stat's column for the 40m FT8 entry in the Band Mode Table?

John - G7SSE

------ Original Message ------
From: "KX2A" < ditzian@...>
Sent: 25/11/2019 17:21:36
Subject: [hamlogger] FT8 in worked/confirmed

Is there a way to put FT8 as a column in worked/confirmed, similar to the PSK column?  I already have FT8 entered for 40 meters in the Bands & Modes chart, but this did not result in a column in worked/confirmed.
 
73,
 
Jan, KX2A
 
 
 
 

 


win10 & logger32 Installation problem

Dusan
 

HI,

I am trying to install  Logger32 in to my new lap top with Win 10, there is a problem:

“ Visual basic 6.0 Setup Toolkit

    Run-time error 52,

    Bad file name or number”

Can anyone help please!

73

Dusan YU1EA

 


L32LogSync

jim watkins
 

I assume this is pointing to Rick, not the Logger32 group.

I have been off the air for a couple weeks, but got a chance to play with the radio on the weekend. When I open up Logger32, I get 3 windows that pop up;

1- L32LogSync (but is states (not Responding))
2-TQSL
3 - Select Station Location for Signing.

I use Task Manager to close L32LogSync. I want to send my updates to EQSL and LOTW, but now can't

Why Am I getting TQSL window open, and how do I stop it from opening.

73s

Jim Watkins


VA3XOV / VO1SF

Never drive faster than your Guardian Angel can fly..


Re: triggering transmitter

Adams
 

thanks Jim, will try that and see what happens, 
Randy, KF4O


Re: FT8 in worked/confirmed

John Munton - G7SSE
 

Jan, do you have a Y in the Stat's column for the 40m FT8 entry in the Band Mode Table?

John - G7SSE

------ Original Message ------
From: "KX2A" <ditzian@...>
Sent: 25/11/2019 17:21:36
Subject: [hamlogger] FT8 in worked/confirmed

Is there a way to put FT8 as a column in worked/confirmed, similar to the PSK column?  I already have FT8 entered for 40 meters in the Bands & Modes chart, but this did not result in a column in worked/confirmed.
 
73,
 
Jan, KX2A
 
 
 


FT8 in worked/confirmed

KX2A
 

Is there a way to put FT8 as a column in worked/confirmed, similar to the PSK column?  I already have FT8 entered for 40 meters in the Bands & Modes chart, but this did not result in a column in worked/confirmed.

73,

Jan, KX2A


Re: triggering transmitter

Jim Hargrave
 

Randy,

Check your radio setup in Logger32. Do you have RTS and/or DTR set HIGH?

If so uncheck them and see if it still transmits.

Some interfaces use DTR/RTS for power.

If the TS890 has PTT by radio control, then select that option …

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Adams via Groups.Io
Sent: Monday, November 25, 2019 9:31 AM
To: hamlogger@groups.io
Subject: [hamlogger] triggering transmitter

 

I have  just  recently purchased  a TS890 and  when I use  Logger 32, it triggers the transmitter.. 
I usually turn on radio first, then turn on Logger.
when it begins to xmit, I turn off the radio and in a bit turn it back on, and seems okay then.. 
Not sure why...
Any thoughts?
Randy, KF4O


triggering transmitter

Adams
 

I have  just  recently purchased  a TS890 and  when I use  Logger 32, it triggers the transmitter.. 
I usually turn on radio first, then turn on Logger.
when it begins to xmit, I turn off the radio and in a bit turn it back on, and seems okay then.. 
Not sure why...
Any thoughts?
Randy, KF4O