|
Re: Multi call sign and multi operator club station - How to log in Logger32?
Frode , Bob
as an experiment, based on your suggestion Bob, I set up the following:   One downside is the Club Member field still need to be filled in for each QSO (Operator would be the in use club / contest call sign etc.) Just a thought guys. 73 John - G7SSE
|
||||||||||||||
|
|
||||||||||||||
|
Re: Missing Log Window
David KN2M
Find missing window worked, thanks for the recommendation Dan.
|
||||||||||||||
|
|
||||||||||||||
|
Missing Log Window
David KN2M
I am not sure what to do about this. Assistance appreciated. I have two copies of 32 running. One at each station location. Problem under consideration; on one copy, the Logbook Page Window icon is NOT highlighted and there is NO open window on the screen to view the logged stations. The Previous QSO's Window is also NOT highlighted and does not show either. Version 3.50.395 but it has been like this for some time, probably a year or more. I think that we should see these and be able to watch them. Is this something that I can easily repair or do we need to get dirty and change the install? Thank you.
|
||||||||||||||
|
|
||||||||||||||
|
Re: Multi call sign and multi operator club station - How to log in Logger32?
Bob
Frode, what you're asking for is not easily done. Correct, there is no station callsign field in Logger32. It was designed such that the Logbook name itself represented the station callsign. I would suggest something like this (you may need to experiment a little) ... all QSOs in the logbook called your club name. Each individual callsign your club uses be in the operator field. Put the callsign of the club member who made the QSO in one of the user fields or an unused field. This allows you to see statistics for all club callsigns individually of collectively. It does not allow you to see individual members statistics for each of the club callsigns, or all of them. That would require exporting the data and massaging it.
On October 31, 2019 at 10:03 AM Frode Igland <frodeigland2@...> wrote:
|
||||||||||||||
|
|
||||||||||||||
|
Multi call sign and multi operator club station - How to log in Logger32?
Frode Igland
Our club station works with several call signs (ordinary, contest and special events), and is operated by several operators. We use Logger32 logger32and want to have all our QSOs in the same log.
We currently log the call sign in use in the Operator column (in line with the Help file instructions), while the operator name and his/her call sign is logged in the Comments column. We have not figured out how our wanted solution can be implemented in Logger32. As long as we find no field/column for Station Callsign, we find no other place to log the station call sign than in the Operator column, where we would rather log the operators. Since ADIF version 2.1.5 in 2004, ADIF has had a field named STATION_CALLSIGN, to be used just for the station call sign in use. This would mean that when we use our contest call sign, the QSOs can be imported into Logger32 with the contest call sign as the station call sign, while the operators are logged in the OPERATOR field, where they belong. Does anybody know a good solution how we can implement logging of a multi call sign, multi operator club station with: 1. all QSOs in one log, 2. station call sign in a Station Callsign field/column, 3. operator in the Operator field/column, and 4. the Comment field/columns available for comments about the QSO? 73 Frode LA6VQ
|
||||||||||||||
|
|
||||||||||||||
|
L32 v35000 failed to start autoinstaller, error 5 invalid proc call or argument under WIN10-64b
ic8pof
HI am setting up the win10-64b (moving from win7pro) but the L32 stops at the end of the update procedure with such error.
I have already enabled ADMIN rights. I have already done the whole proc uninstall\reinstall but nothing happens. I have tried to insert the old win7-L32-folder-full-LOG instead of the new win10-L32-folder empty and it works. Any more suggestion to get a clean&updated L32 installation? 73 Phil IC8POF
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
f8aof
HI,
The solution being found with the software "ADIF Filter", thanks to John G7SSE and Daniel F6FLU for the help. Bob it would be nice to integrate this option "Propagation Mode" directly on L32 before an export in adif format. A link on the french forum Radioamateur.org for stapes : https://radioamateur.org/forums/index.php?/topic/36970-logger32-partial-log/ Thank you and 73's jerome f8aof  De : f8aof@... A : hamlogger@groups.io Envoyé: mercredi 30 octobre 2019 16:29 Objet : Re: [hamlogger] L32/ PartialLOG John,
My present Logbook page jerome f8aof  De : "John Munton - G7SSE"
A : hamlogger@groups.io Envoyé: mercredi 30 octobre 2019 15:10 Objet : Re: [hamlogger] L32/ PartialLOG Daniel
As stated; using PROP_MODE as the user defined field and SAT in the contents works fine here. I set up the following QSO in my log as a test, then ran my log ADIF through the filter program. <BAND:2>2M <CALL:5>F8AOF <COMMENT:8>via FO85 <CONT:2>EU <CQZ:2>14 <DXCC:3>227 <FREQ:10>145.000000 <ITUZ:2>27 <MODE:2>FM <NAME:6>Jerome <OPERATOR:5>G7SSE <PFX:2>F8 <PROP_MODE:3>SAT <QSO_DATE:8:D>20191029 <TIME_ON:6>134200 <QTH:4>Test <RST_RCVD:2>59 <RST_SENT:2>59 <TIME_OFF:6>134400 <APP_LOGGER32_QSO_NUMBER:5>13694 <COUNTRY:6>France <APP_LOGGER32_LAT:4>48.8 <APP_LOGGER32_LNG:4>-2.3 <EOR> As this was the only QSO in my log with SAT in the Prop Mode field this was the only result. This is assuming you are actually using the PROP_MODE field in Logger32;  John - G7SSE
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
f8aof
John,
My present Logbook page jerome f8aof  De : "John Munton - G7SSE" A : hamlogger@groups.io Envoyé: mercredi 30 octobre 2019 15:10 Objet : Re: [hamlogger] L32/ PartialLOG Daniel
As stated; using PROP_MODE as the user defined field and SAT in the contents works fine here. I set up the following QSO in my log as a test, then ran my log ADIF through the filter program. <BAND:2>2M <CALL:5>F8AOF <COMMENT:8>via FO85 <CONT:2>EU <CQZ:2>14 <DXCC:3>227 <FREQ:10>145.000000 <ITUZ:2>27 <MODE:2>FM <NAME:6>Jerome <OPERATOR:5>G7SSE <PFX:2>F8 <PROP_MODE:3>SAT <QSO_DATE:8:D>20191029 <TIME_ON:6>134200 <QTH:4>Test <RST_RCVD:2>59 <RST_SENT:2>59 <TIME_OFF:6>134400 <APP_LOGGER32_QSO_NUMBER:5>13694 <COUNTRY:6>France <APP_LOGGER32_LAT:4>48.8 <APP_LOGGER32_LNG:4>-2.3 <EOR> As this was the only QSO in my log with SAT in the Prop Mode field this was the only result. This is assuming you are actually using the PROP_MODE field in Logger32;  John - G7SSE
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
f8aof
Hi Daniel,
I just tested your tip, it turns out I do not have in "Field Name" "App_Logger32_user_1" ...
So I tested with the field "PROP_MODE" and the QSO satellites seem to be exported now.
I still do not understand why when I choose "PROP_MODE" and "SAT" without using in L32, the option "SAT" in USER_1 does not work.
Maybe it is necessary then to make a particular export first since L32?
Jerome f8aof
 De : "daniel lavocat" A : hamlogger@groups.io Envoyé: mercredi 30 octobre 2019 14:39 Objet : Re: [hamlogger] L32/ PartialLOG Hello Jerome You have to use the "USER_1" Field into L32 and add for exemple "SAT" into this file when you make a QSO via Satellite and after with the ADIF Filter you can select in the "use User defined Field" the "APP_LOGGER32_USER_1 Field and select the word "SAT" into the Contents Field I think that works :  73 -- Daniel
John Munton - G7SSE a écrit le 30/10/2019 à 14:33 :
Jerome
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
Good news Daniel :-)
Hopefully Jerome has been able to resolve his issue also. 73 John - G7SSE
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
daniel lavocat <F6FLU@...>
I undestood my ADIF test file did not have the PROP_Mode field filled in :-) I tested with a new test file and everything is OK Thanks John -- Daniel
daniel lavocat a écrit le 30/10/2019 à 15:19 :
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
daniel lavocat <F6FLU@...>
Hi John OK but the problem is how you can have the PROP_MODE with ADIF Filter ? We can select this PROP_MODE Field with ADIF Filter that is the problem With L32 no Problem we have Prop_mode and SAT_Mode and SAT_Name Can you see a sceen copy of the ADIF FILTER to use ? Thanks 73 -- Daniel
John Munton - G7SSE a écrit le 30/10/2019 à 15:10 :
Daniel
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
Daniel
As stated; using PROP_MODE as the user defined field and SAT in the contents works fine here. I set up the following QSO in my log as a test, then ran my log ADIF through the filter program. <BAND:2>2M <CALL:5>F8AOF <COMMENT:8>via FO85 <CONT:2>EU <CQZ:2>14 <DXCC:3>227 <FREQ:10>145.000000 <ITUZ:2>27 <MODE:2>FM <NAME:6>Jerome <OPERATOR:5>G7SSE <PFX:2>F8 <PROP_MODE:3>SAT <QSO_DATE:8:D>20191029 <TIME_ON:6>134200 <QTH:4>Test <RST_RCVD:2>59 <RST_SENT:2>59 <TIME_OFF:6>134400 <APP_LOGGER32_QSO_NUMBER:5>13694 <COUNTRY:6>France <APP_LOGGER32_LAT:4>48.8 <APP_LOGGER32_LNG:4>-2.3 <EOR> As this was the only QSO in my log with SAT in the Prop Mode field this was the only result. This is assuming you are actually using the PROP_MODE field in Logger32;  John - G7SSE
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
daniel lavocat <F6FLU@...>
Hello Jerome You have to use the "USER_1" Field into L32 and add for exemple "SAT" into this file when you make a QSO via Satellite and after with the ADIF Filter you can select in the "use User defined Field" the "APP_LOGGER32_USER_1 Field and select the word "SAT" into the Contents Field I think that works :  73 -- Daniel
John Munton - G7SSE a écrit le 30/10/2019 à 14:33 :
Jerome
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
Jerome
I've been doing some tests, all seems to work as expected here. Would you like to send me a copy of your ADIF log and I'll have a try with it. John - G7SSE
|
||||||||||||||
|
|
||||||||||||||
|
Re: ADIF Editing
Eric Tucker
Bob, I agree with Dave. Club Log only amends the changed entries. The report just showed 2 anomalies, due to my typing errors, that are now corrected in L32.
Thanks again for your help. 73. -- Eric Tucker G3TXZ
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
f8aof
Hi John Thank you for this program "Adif_Filter". The program seems to work well, except for what I want to get. Indeed, when I define the options "User defined field" and Field Name "PROP_MODE" and "Contents" SAT ", all the QSOs of my log are chosen. The QSO Sat are not filtered in this field PROP-MODE "with the option" SAT ". The Mode-SAT, Name-SAT options work well. An idea? Jerome f8aof De : "John Munton - G7SSE" A : hamlogger@groups.io Envoyé: mercredi 30 octobre 2019 10:34 Objet : Re: [hamlogger] L32/ PartialLOG Jerome
Have a look at the ADIF Filter utility by Marek - SP7DQR http://sp7dqr.pl/en/converters.php#ADIF_FILTER It may be able to provide the sorting options you require. 73 John - G7SSE
|
||||||||||||||
|
|
||||||||||||||
|
Re: L32/ PartialLOG
Jerome
Have a look at the ADIF Filter utility by Marek - SP7DQR http://sp7dqr.pl/en/converters.php#ADIF_FILTER It may be able to provide the sorting options you require. 73 John - G7SSE
|
||||||||||||||
|
|
||||||||||||||
|
L32/ PartialLOG
f8aof
Hi, I would like to export one part of my log by propagation mode as in Lotw's TQSL menu. I know this possibility does not exist in the current version of L32. I find it will be interesting to offer this new posibility in L32 to make an export other than modes or frequencies. So we could export our QSO in MSK144, Satellites, Rain Scatter EME .... A link on the french radio amateur forum or I ask this same question with photos : https://radioamateur.org/forums/index.php?/topic/36970-logger32-partial-log/ Thanks for reading me. Jerome F8AOF
|
||||||||||||||
|
|
||||||||||||||
|
Re: ADIF Editing
Dave Colliau
Bob I just did a full log clublog update and no problem except one weird call from armed forces day 40 years ago.
Dave N8DC
On October 29, 2019 at 10:44 AM Bob <k4cy@...> wrote:
|
||||||||||||||
|
|
