Date   

Re: OmniRig bridge for LOGGER32 needed

Bob
 

Alessandro, Omnirig or any additional software in NOT needed. Logger32 provides all the necessary rig switching to connect to WSJT/JTDX. Read the Help file section UDP BANDMAP and pay particular attention to section 5.4 that explains (with pretty colored pictured) how to switch rig control from Logger32 to WSJT/JTDX without additional software. SeventyThree(s).


Re: WAS SETTINGS

larry fields
 

I must have a bad copy here as I been doing this for days and all it does is circulate and nothing comes up..

Thanks and 73
Larry Fields: du1/n6hpx
Manila PHILIPPINES

Retired looking for more work
Office:(63)46-571-5687
cell:    (63)916-756-7781
=====================================================
member:
American Radio Relay League W1AW
Philippine Amatuer Radio Association DX1PAR
Philippine Radio Pyramid Society DX1PRS 
=====================================================
owner:
=======================================================
LICENSED HAM RADIO OP:
DX1PRS GROUP 145.340 mhz
DX1PAR HF NET  7095.00 khz & 7165.0 khz
========================================================
DU1/N6HPX:QRX DX1PAR 7095
DX1PRS 7165 khz evening
DX1PRS 145.340 mhz
DX1L 431.9,
SIMPLEX 144.6, 145.600
2M 144.225 SSB ,
APRS n6hpx(-08) HT Satellite (-02)
=============================================================
SATELLITE:
APRS N6HPX-2 GATEWAY













On Tue, Sep 3, 2019 at 11:56 AM ja1nlx <ayoshida0205@...> wrote:

Larry

I see like this. What you really see at each step ?

1. Right click on WO7R in Logbook page window. I see this.

2. Click Edit Admin Subdivision info. I see this.


73

On 2019/09/03 20:21, larry fields wrote:
I have done this many times and it searches for it but nothing appears after it stops

Thanks and 73
Larry Fields: du1/n6hpx
Manila PHILIPPINES

Retired looking for more work
Office:(63)46-571-5687
cell:    (63)916-756-7781
=====================================================
member:
American Radio Relay League W1AW
Philippine Amatuer Radio Association DX1PAR
Philippine Radio Pyramid Society DX1PRS 
=====================================================
owner:
=======================================================
LICENSED HAM RADIO OP:
DX1PRS GROUP 145.340 mhz
DX1PAR HF NET  7095.00 khz & 7165.0 khz
========================================================
DU1/N6HPX:QRX DX1PAR 7095
DX1PRS 7165 khz evening
DX1PRS 145.340 mhz
DX1L 431.9,
SIMPLEX 144.6, 145.600
2M 144.225 SSB ,
APRS n6hpx(-08) HT Satellite (-02)
=============================================================
SATELLITE:
APRS N6HPX-2 GATEWAY













On Tue, Sep 3, 2019 at 11:17 AM larry fields via Groups.Io <n6hpx1=gmail.com@groups.io> wrote:
I did but the box never comes up. Not sure why this is so I used my Windows 7 before and it came up but now the windows 10 is not showing it.
Thanks and 73
Larry Fields: du1/n6hpx
Manila PHILIPPINES

Retired looking for more work
Office:(63)46-571-5687
cell:    (63)916-756-7781
=====================================================
member:
American Radio Relay League W1AW
Philippine Amatuer Radio Association DX1PAR
Philippine Radio Pyramid Society DX1PRS 
=====================================================
owner:
=======================================================
LICENSED HAM RADIO OP:
DX1PRS GROUP 145.340 mhz
DX1PAR HF NET  7095.00 khz & 7165.0 khz
========================================================
DU1/N6HPX:QRX DX1PAR 7095
DX1PRS 7165 khz evening
DX1PRS 145.340 mhz
DX1L 431.9,
SIMPLEX 144.6, 145.600
2M 144.225 SSB ,
APRS n6hpx(-08) HT Satellite (-02)
=============================================================
SATELLITE:
APRS N6HPX-2 GATEWAY













On Tue, Sep 3, 2019 at 10:50 AM Gerald Boutin <groupsio@...> wrote:
On Tue, Sep 3, 2019 at 07:05 AM, larry fields wrote:
yes when I go to logger before I did the right click of the log of the station I wanted to add say for example KD6C, it use to show the item where I could add the info but now it seems like it doesn't come up is there a different one. I did this before about 2 yrs ago but maybe something got changed.
Larry,

When you right click on the log entry for the station, you should see a large list of options. Click on the "Edit Admin Subdivision Info" option. That should bring up the box to enter the State/County information.


 
--
Gerald, VE1DT
--
73 de aki
JA1NLX


Re: OmniRig bridge for LOGGER32 needed

Jim Hargrave
 

Not a problem…

 

1)      Set Rig <> Logger32

2)      Set Rig <> JTDX/WSJT-X

3)      Tick UDP /  Config / Allow JTDX/WSJT-X to set Logger32 frequency/ Mode.

4)      Open/close JTDX-WSJT-X in the UDP module

This will initially open RIG port in Logger32. When JTDX/WSJT-X isopened,Logger32 will close radio port and open JT port

 

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John, G4DRS via Groups.Io
Sent: Tuesday, September 3, 2019 7:21 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] OmniRig bridge for LOGGER32 needed

 

Very simple example: if you want to use Logger32 AND WSJT-X AND you use MicroHam you have serious limitations (you have to choose if you want to open the connection RIG<>Logger32 or RIG<>WSJT-X)


Alessandro,
I don't know which Microham items you use, but with some of them (such as the Microkeyer, which I have) it is possible to set up a '2nd CAT port' in the Router software. I use this to have Logger32 and either WSJT-X or a panadapter connected to the same radio simultaneously.
I thought Logger32 slave port functionality was intended to enable using a panadapter directly from Logger32, but it only seems to be possible to communicate one-way, so the panadapter program does not work this way.
Thus, I have to choose either the panadapter or WSJT-X on the 2nd CAT port.
It's not perfect, but it may give you a way forward.


John
G4DRS


Re: OmniRig bridge for LOGGER32 needed

John, G4DRS
 

Very simple example: if you want to use Logger32 AND WSJT-X AND you use MicroHam you have serious limitations (you have to choose if you want to open the connection RIG<>Logger32 or RIG<>WSJT-X)

Alessandro,
I don't know which Microham items you use, but with some of them (such as the Microkeyer, which I have) it is possible to set up a '2nd CAT port' in the Router software. I use this to have Logger32 and either WSJT-X or a panadapter connected to the same radio simultaneously.
I thought Logger32 slave port functionality was intended to enable using a panadapter directly from Logger32, but it only seems to be possible to communicate one-way, so the panadapter program does not work this way.
Thus, I have to choose either the panadapter or WSJT-X on the 2nd CAT port.
It's not perfect, but it may give you a way forward.


John
G4DRS


Re: OmniRig bridge for LOGGER32 needed

Alessandro I2SVA
 

Back again on Omnirig and alternative solutions, this is my guess:

- Omnirig is a sw solution that allows multiple applications to access one of the supported Rigs, it does not interfere with any USB port simulator (like LP-Bridge, Eltima, Silicon Labs, Com0com, etc) and therefore it is very convenient

- Any other SW solution that emulate or create USB port bridge, repeater, etc has or may have compatibility issues with USB port simulators already in use (i.e. Eltima, used by MicroHam devices). Moreover more applications in use = more complexity = more troubles...

- Any good reason why the Omnirig driver is not included in Logger32 roadmap?

- Very simple example: if you want to use Logger32 AND WSJT-X AND you use MicroHam you have serious limitations (you have to choose if you want to open the connection RIG<>Logger32 or RIG<>WSJT-X)

Thanks, 73

Alessandro I2SVA


Re: WAS SETTINGS

ja1nlx
 

Larry

I see like this. What you really see at each step ?

1. Right click on WO7R in Logbook page window. I see this.

2. Click Edit Admin Subdivision info. I see this.


73

On 2019/09/03 20:21, larry fields wrote:
I have done this many times and it searches for it but nothing appears after it stops

Thanks and 73
Larry Fields: du1/n6hpx
Manila PHILIPPINES

Retired looking for more work
Office:(63)46-571-5687
cell:    (63)916-756-7781
=====================================================
member:
American Radio Relay League W1AW
Philippine Amatuer Radio Association DX1PAR
Philippine Radio Pyramid Society DX1PRS 
=====================================================
owner:
=======================================================
LICENSED HAM RADIO OP:
DX1PRS GROUP 145.340 mhz
DX1PAR HF NET  7095.00 khz & 7165.0 khz
========================================================
DU1/N6HPX:QRX DX1PAR 7095
DX1PRS 7165 khz evening
DX1PRS 145.340 mhz
DX1L 431.9,
SIMPLEX 144.6, 145.600
2M 144.225 SSB ,
APRS n6hpx(-08) HT Satellite (-02)
=============================================================
SATELLITE:
APRS N6HPX-2 GATEWAY













On Tue, Sep 3, 2019 at 11:17 AM larry fields via Groups.Io <n6hpx1=gmail.com@groups.io> wrote:
I did but the box never comes up. Not sure why this is so I used my Windows 7 before and it came up but now the windows 10 is not showing it.
Thanks and 73
Larry Fields: du1/n6hpx
Manila PHILIPPINES

Retired looking for more work
Office:(63)46-571-5687
cell:    (63)916-756-7781
=====================================================
member:
American Radio Relay League W1AW
Philippine Amatuer Radio Association DX1PAR
Philippine Radio Pyramid Society DX1PRS 
=====================================================
owner:
=======================================================
LICENSED HAM RADIO OP:
DX1PRS GROUP 145.340 mhz
DX1PAR HF NET  7095.00 khz & 7165.0 khz
========================================================
DU1/N6HPX:QRX DX1PAR 7095
DX1PRS 7165 khz evening
DX1PRS 145.340 mhz
DX1L 431.9,
SIMPLEX 144.6, 145.600
2M 144.225 SSB ,
APRS n6hpx(-08) HT Satellite (-02)
=============================================================
SATELLITE:
APRS N6HPX-2 GATEWAY













On Tue, Sep 3, 2019 at 10:50 AM Gerald Boutin <groupsio@...> wrote:
On Tue, Sep 3, 2019 at 07:05 AM, larry fields wrote:
yes when I go to logger before I did the right click of the log of the station I wanted to add say for example KD6C, it use to show the item where I could add the info but now it seems like it doesn't come up is there a different one. I did this before about 2 yrs ago but maybe something got changed.
Larry,

When you right click on the log entry for the station, you should see a large list of options. Click on the "Edit Admin Subdivision Info" option. That should bring up the box to enter the State/County information.


 
--
Gerald, VE1DT
--
73 de aki
JA1NLX


Re: WAS SETTINGS

larry fields
 

I have done this many times and it searches for it but nothing appears after it stops

Thanks and 73
Larry Fields: du1/n6hpx
Manila PHILIPPINES

Retired looking for more work
Office:(63)46-571-5687
cell:    (63)916-756-7781
=====================================================
member:
American Radio Relay League W1AW
Philippine Amatuer Radio Association DX1PAR
Philippine Radio Pyramid Society DX1PRS 
=====================================================
owner:
=======================================================
LICENSED HAM RADIO OP:
DX1PRS GROUP 145.340 mhz
DX1PAR HF NET  7095.00 khz & 7165.0 khz
========================================================
DU1/N6HPX:QRX DX1PAR 7095
DX1PRS 7165 khz evening
DX1PRS 145.340 mhz
DX1L 431.9,
SIMPLEX 144.6, 145.600
2M 144.225 SSB ,
APRS n6hpx(-08) HT Satellite (-02)
=============================================================
SATELLITE:
APRS N6HPX-2 GATEWAY













On Tue, Sep 3, 2019 at 11:17 AM larry fields via Groups.Io <n6hpx1=gmail.com@groups.io> wrote:
I did but the box never comes up. Not sure why this is so I used my Windows 7 before and it came up but now the windows 10 is not showing it.
Thanks and 73
Larry Fields: du1/n6hpx
Manila PHILIPPINES

Retired looking for more work
Office:(63)46-571-5687
cell:    (63)916-756-7781
=====================================================
member:
American Radio Relay League W1AW
Philippine Amatuer Radio Association DX1PAR
Philippine Radio Pyramid Society DX1PRS 
=====================================================
owner:
=======================================================
LICENSED HAM RADIO OP:
DX1PRS GROUP 145.340 mhz
DX1PAR HF NET  7095.00 khz & 7165.0 khz
========================================================
DU1/N6HPX:QRX DX1PAR 7095
DX1PRS 7165 khz evening
DX1PRS 145.340 mhz
DX1L 431.9,
SIMPLEX 144.6, 145.600
2M 144.225 SSB ,
APRS n6hpx(-08) HT Satellite (-02)
=============================================================
SATELLITE:
APRS N6HPX-2 GATEWAY













On Tue, Sep 3, 2019 at 10:50 AM Gerald Boutin <groupsio@...> wrote:
On Tue, Sep 3, 2019 at 07:05 AM, larry fields wrote:
yes when I go to logger before I did the right click of the log of the station I wanted to add say for example KD6C, it use to show the item where I could add the info but now it seems like it doesn't come up is there a different one. I did this before about 2 yrs ago but maybe something got changed.
Larry,

When you right click on the log entry for the station, you should see a large list of options. Click on the "Edit Admin Subdivision Info" option. That should bring up the box to enter the State/County information.


 
--
Gerald, VE1DT


Re: WAS SETTINGS

larry fields
 

I did but the box never comes up. Not sure why this is so I used my Windows 7 before and it came up but now the windows 10 is not showing it.
Thanks and 73
Larry Fields: du1/n6hpx
Manila PHILIPPINES

Retired looking for more work
Office:(63)46-571-5687
cell:    (63)916-756-7781
=====================================================
member:
American Radio Relay League W1AW
Philippine Amatuer Radio Association DX1PAR
Philippine Radio Pyramid Society DX1PRS 
=====================================================
owner:
=======================================================
LICENSED HAM RADIO OP:
DX1PRS GROUP 145.340 mhz
DX1PAR HF NET  7095.00 khz & 7165.0 khz
========================================================
DU1/N6HPX:QRX DX1PAR 7095
DX1PRS 7165 khz evening
DX1PRS 145.340 mhz
DX1L 431.9,
SIMPLEX 144.6, 145.600
2M 144.225 SSB ,
APRS n6hpx(-08) HT Satellite (-02)
=============================================================
SATELLITE:
APRS N6HPX-2 GATEWAY













On Tue, Sep 3, 2019 at 10:50 AM Gerald Boutin <groupsio@...> wrote:
On Tue, Sep 3, 2019 at 07:05 AM, larry fields wrote:
yes when I go to logger before I did the right click of the log of the station I wanted to add say for example KD6C, it use to show the item where I could add the info but now it seems like it doesn't come up is there a different one. I did this before about 2 yrs ago but maybe something got changed.
Larry,

When you right click on the log entry for the station, you should see a large list of options. Click on the "Edit Admin Subdivision Info" option. That should bring up the box to enter the State/County information.


 
--
Gerald, VE1DT


Re: WAS SETTINGS

Gerald Boutin
 

On Tue, Sep 3, 2019 at 07:05 AM, larry fields wrote:
yes when I go to logger before I did the right click of the log of the station I wanted to add say for example KD6C, it use to show the item where I could add the info but now it seems like it doesn't come up is there a different one. I did this before about 2 yrs ago but maybe something got changed.
Larry,

When you right click on the log entry for the station, you should see a large list of options. Click on the "Edit Admin Subdivision Info" option. That should bring up the box to enter the State/County information.


 
--
Gerald, VE1DT


Re: WAS SETTINGS

larry fields
 

yes when I go to logger before I did the right click of the log of the station I wanted to add say for example KD6C, it use to show the item where I could add the info but now it seems like it doesn't come up is there a different one. I did this before about 2 yrs ago but maybe something got changed.


Re: WAS SETTINGS

ja1nlx
 

Larry

Where you try to "add the WAS and Counties" ? In Logbook page window ?

73

On 2019/09/03 17:59, larry fields wrote:
After the other day I decided to do some updates on my log and noticed when I try to add the WAS and Counties it doesn't want me to add. Is there a different setting now. I recall doing it before but haven't been able to locate where that was.

Larry du1/n6hpx Manila
--
73 de aki
JA1NLX


WAS SETTINGS

larry fields
 

After the other day I decided to do some updates on my log and noticed when I try to add the WAS and Counties it doesn't want me to add. Is there a different setting now. I recall doing it before but haven't been able to locate where that was.

Larry du1/n6hpx Manila


Re: Colors, colors ...

ja1nlx
 

Martin

RRR

73

On 2019/09/03 17:26, Martin J.K. wrote:
Aki

Let me install L32 on friend's PC first.
Then I will tell you which color I want to set up.
It will be probably tomorrow.

73
Martin 9A2JK

On 3.9.2019. 10:16, ja1nlx wrote:

Martin

Basically color setting for specific window (I mean Logbook page window etc) works only in this window.

However as you see there is no settings in Logbook page window itself, setting in Setup/Highlight works

Logbook page window and Previous QSO window etc.

Please tell me which window's color you want to set up. It may be faster....:-)

73

On 2019/09/03 17:02, Martin J.K. wrote:
Aki,
thanks for fast answer.
Yes, I know all is in the L32 Help.
I am under impression that color settings in one window depend on the settings
in the other window. I may be wrong and that is why I ask.

I will follow your advice and start with the Logbook page window,
then DX spot, etc. And, of course, reading L32 Help again.

Thank you and 73
Martin 9A2JK


On 3.9.2019. 9:54, ja1nlx wrote:

Martin

For Logbook page window color go to Setup/Highlight.

For DX spot window color go to right-click on DX spot window, click Setup/Appearance/DX spot highlight color.

For Logbook entry window color go to right-click on Logbook entry window, click Setup/Appearance/

and many more.....step-by-step referring to Logger32 Help.

73

On 2019/09/03 16:43, Martin J.K. wrote:
I am happy L32 user for some time but the colors are confuses me.
If I understand it correctly the color settings in one window depends
of the color settings in some other window?

I am installing L32 on a friend's PC and looking for advice
where to start setting up the colors?
Which window should be set first?

73
Martin 9A2JK


--
73 de aki
JA1NLX

--
73 de aki
JA1NLX

--
73 de aki
JA1NLX


Re: Colors, colors ...

Martin J.K.
 

Aki

Let me install L32 on friend's PC first.
Then I will tell you which color I want to set up.
It will be probably tomorrow.

73
Martin 9A2JK

On 3.9.2019. 10:16, ja1nlx wrote:

Martin

Basically color setting for specific window (I mean Logbook page window etc) works only in this window.

However as you see there is no settings in Logbook page window itself, setting in Setup/Highlight works

Logbook page window and Previous QSO window etc.

Please tell me which window's color you want to set up. It may be faster....:-)

73

On 2019/09/03 17:02, Martin J.K. wrote:
Aki,
thanks for fast answer.
Yes, I know all is in the L32 Help.
I am under impression that color settings in one window depend on the settings
in the other window. I may be wrong and that is why I ask.

I will follow your advice and start with the Logbook page window,
then DX spot, etc. And, of course, reading L32 Help again.

Thank you and 73
Martin 9A2JK


On 3.9.2019. 9:54, ja1nlx wrote:

Martin

For Logbook page window color go to Setup/Highlight.

For DX spot window color go to right-click on DX spot window, click Setup/Appearance/DX spot highlight color.

For Logbook entry window color go to right-click on Logbook entry window, click Setup/Appearance/

and many more.....step-by-step referring to Logger32 Help.

73

On 2019/09/03 16:43, Martin J.K. wrote:
I am happy L32 user for some time but the colors are confuses me.
If I understand it correctly the color settings in one window depends
of the color settings in some other window?

I am installing L32 on a friend's PC and looking for advice
where to start setting up the colors?
Which window should be set first?

73
Martin 9A2JK


--
73 de aki
JA1NLX

--
73 de aki
JA1NLX


Re: Colors, colors ...

ja1nlx
 

Martin

Basically color setting for specific window (I mean Logbook page window etc) works only in this window.

However as you see there is no settings in Logbook page window itself, setting in Setup/Highlight works

Logbook page window and Previous QSO window etc.

Please tell me which window's color you want to set up. It may be faster....:-)

73

On 2019/09/03 17:02, Martin J.K. wrote:
Aki,
thanks for fast answer.
Yes, I know all is in the L32 Help.
I am under impression that color settings in one window depend on the settings
in the other window. I may be wrong and that is why I ask.

I will follow your advice and start with the Logbook page window,
then DX spot, etc. And, of course, reading L32 Help again.

Thank you and 73
Martin 9A2JK


On 3.9.2019. 9:54, ja1nlx wrote:

Martin

For Logbook page window color go to Setup/Highlight.

For DX spot window color go to right-click on DX spot window, click Setup/Appearance/DX spot highlight color.

For Logbook entry window color go to right-click on Logbook entry window, click Setup/Appearance/

and many more.....step-by-step referring to Logger32 Help.

73

On 2019/09/03 16:43, Martin J.K. wrote:
I am happy L32 user for some time but the colors are confuses me.
If I understand it correctly the color settings in one window depends
of the color settings in some other window?

I am installing L32 on a friend's PC and looking for advice
where to start setting up the colors?
Which window should be set first?

73
Martin 9A2JK


--
73 de aki
JA1NLX

--
73 de aki
JA1NLX


Re: Colors, colors ...

Martin J.K.
 

Aki,
thanks for fast answer.
Yes, I know all is in the L32 Help.
I am under impression that color settings in one window depend on the settings
in the other window. I may be wrong and that is why I ask.

I will follow your advice and start with the Logbook page window,
then DX spot, etc. And, of course, reading L32 Help again.

Thank you and 73
Martin 9A2JK


On 3.9.2019. 9:54, ja1nlx wrote:

Martin

For Logbook page window color go to Setup/Highlight.

For DX spot window color go to right-click on DX spot window, click Setup/Appearance/DX spot highlight color.

For Logbook entry window color go to right-click on Logbook entry window, click Setup/Appearance/

and many more.....step-by-step referring to Logger32 Help.

73

On 2019/09/03 16:43, Martin J.K. wrote:
I am happy L32 user for some time but the colors are confuses me.
If I understand it correctly the color settings in one window depends
of the color settings in some other window?

I am installing L32 on a friend's PC and looking for advice
where to start setting up the colors?
Which window should be set first?

73
Martin 9A2JK


--
73 de aki
JA1NLX


Re: Colors, colors ...

ja1nlx
 

Martin

For Logbook page window color go to Setup/Highlight.

For DX spot window color go to right-click on DX spot window, click Setup/Appearance/DX spot highlight color.

For Logbook entry window color go to right-click on Logbook entry window, click Setup/Appearance/

and many more.....step-by-step referring to Logger32 Help.

73

On 2019/09/03 16:43, Martin J.K. wrote:
I am happy L32 user for some time but the colors are confuses me.
If I understand it correctly the color settings in one window depends
of the color settings in some other window?

I am installing L32 on a friend's PC and looking for advice
where to start setting up the colors?
Which window should be set first?

73
Martin 9A2JK


--
73 de aki
JA1NLX


Colors, colors ...

Martin J.K.
 

I am happy L32 user for some time but the colors are confuses me.
If I understand it correctly the color settings in one window depends
of the color settings in some other window?

I am installing L32 on a friend's PC and looking for advice
where to start setting up the colors?
Which window should be set first?

73
Martin 9A2JK



Re: and another one !

F4FQH Olivier
 

Hi Jim
 
Arfff, yes i did not remember that CTRL A turn rotor. I don’t use hotkeys in logger , just CTRL D sometimes for spoting.
Maybe just reactivated in an update, because it’s not since a long time that i have the issue
 
Thanks
Solved !
 
73s
 
Olivier
F4FQH
 
 

From: Jim Hargrave
Sent: Monday, September 2, 2019 5:34 PM
To: hamlogger@groups.io
Subject: FW: FW: [hamlogger] and another one !
 

Olivier,

That is a normal Windows operation. See Bob’s suggestion below.

 

Jim – w5ifp-

 

From: Bob [mailto:k4cy@...]
Sent: Monday, September 2, 2019 8:34 AM
To: Jim Hargrave <w5ifp@...>
Subject: Re: FW: [hamlogger] and another one !

 

Jim,

That would be my suggestion - Click SETUP | HOTKEYS and UNcheck ALT+A and CTL+A TO TURN ROTOR or go to the rotor setup window and UNcheck the option. 73.

On September 2, 2019 at 9:27 AM Jim Hargrave <w5ifp@...> wrote:

If the rotor Has Global CTRL A capture selected, it locks CTRL A from other programs

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Olivier F4FQH
Sent: Monday, September 2, 2019 7:11 AM
To: hamlogger@groups.io
Subject: [hamlogger] and another one !

 

Hi Bob,

 

i have a new one for you !

 

When logger is open, it lock my CTRL A for everything else using CTRL A.

 

Tested several time, if i close logger CTRL A work again.

 

Please other users, test this if you have the same issue so Bob could investigate the problem.

 

 

Thanks

 

73s

F4FQH

Olivier

 


 


FW: FW: [hamlogger] and another one !

Jim Hargrave
 

Olivier,

That is a normal Windows operation. See Bob’s suggestion below.

 

Jim – w5ifp-

 

From: Bob [mailto:k4cy@...]
Sent: Monday, September 2, 2019 8:34 AM
To: Jim Hargrave <w5ifp@...>
Subject: Re: FW: [hamlogger] and another one !

 

Jim,

That would be my suggestion - Click SETUP | HOTKEYS and UNcheck ALT+A and CTL+A TO TURN ROTOR or go to the rotor setup window and UNcheck the option. 73.

On September 2, 2019 at 9:27 AM Jim Hargrave <w5ifp@...> wrote:

If the rotor Has Global CTRL A capture selected, it locks CTRL A from other programs

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Olivier F4FQH
Sent: Monday, September 2, 2019 7:11 AM
To: hamlogger@groups.io
Subject: [hamlogger] and another one !

 

Hi Bob,

 

i have a new one for you !

 

When logger is open, it lock my CTRL A for everything else using CTRL A.

 

Tested several time, if i close logger CTRL A work again.

 

Please other users, test this if you have the same issue so Bob could investigate the problem.

 

 

Thanks

 

73s

F4FQH

Olivier

 


 

7361 - 7380 of 84743