Date   
Re: rotor problem

Richard Zalewski
 

ok....JTDX IS USING COMM 6.  Not sure what you mean when you say even when I start JTDX?  I start JTDX from L32 UDP port.

Richard 
W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV


Be joyful in hope, patient in affliction, faithful in prayer


On Sat, Aug 24, 2019 at 9:55 AM Bob <k4cy@...> wrote:

I asked two questions, you didn't answer either. SeventyThree(s).

On August 24, 2019 at 12:51 PM Richard Zalewski <dick.w7zr@...> wrote:

Yup really strange.  Rotor works in L32 until I start FT8 with JTDX.  

Richard 
W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV


Be joyful in hope, patient in affliction, faithful in prayer


On Sat, Aug 24, 2019 at 9:31 AM Bob < k4cy@...> wrote:

Very rude of JTDX to do that. What serial port is JTDX configured to use for its radio connection? You say that the rotor port comm 11 works fine with other programs ... even if you start JTDX? SeventyThree(s).

On August 24, 2019 at 11:19 AM Richard Zalewski < dick.w7zr@...> wrote:

New.  Rotor working fine in L32 except when start JTDX it stops the Comm 11 for the rotor.  Rotor works fine in other programs on comm11

 

 

Re: rotor problem

Bob <k4cy@...>
 

I asked two questions, you didn't answer either. SeventyThree(s).

On August 24, 2019 at 12:51 PM Richard Zalewski <dick.w7zr@...> wrote:

Yup really strange.  Rotor works in L32 until I start FT8 with JTDX.  

Richard 
W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV


Be joyful in hope, patient in affliction, faithful in prayer


On Sat, Aug 24, 2019 at 9:31 AM Bob < k4cy@...> wrote:

Very rude of JTDX to do that. What serial port is JTDX configured to use for its radio connection? You say that the rotor port comm 11 works fine with other programs ... even if you start JTDX? SeventyThree(s).

On August 24, 2019 at 11:19 AM Richard Zalewski < dick.w7zr@...> wrote:

New.  Rotor working fine in L32 except when start JTDX it stops the Comm 11 for the rotor.  Rotor works fine in other programs on comm11

 

 

Re: rotor problem

Richard Zalewski
 

Yup really strange.  Rotor works in L32 until I start FT8 with JTDX.  

Richard 
W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV


Be joyful in hope, patient in affliction, faithful in prayer


On Sat, Aug 24, 2019 at 9:31 AM Bob <k4cy@...> wrote:

Very rude of JTDX to do that. What serial port is JTDX configured to use for its radio connection? You say that the rotor port comm 11 works fine with other programs ... even if you start JTDX? SeventyThree(s).

On August 24, 2019 at 11:19 AM Richard Zalewski <dick.w7zr@...> wrote:

New.  Rotor working fine in L32 except when start JTDX it stops the Comm 11 for the rotor.  Rotor works fine in other programs on comm11

Re: rotor problem

Bob <k4cy@...>
 

Very rude of JTDX to do that. What serial port is JTDX configured to use for its radio connection? You say that the rotor port comm 11 works fine with other programs ... even if you start JTDX? SeventyThree(s).

On August 24, 2019 at 11:19 AM Richard Zalewski <dick.w7zr@...> wrote:

New.  Rotor working fine in L32 except when start JTDX it stops the Comm 11 for the rotor.  Rotor works fine in other programs on comm11

rotor problem

Richard Zalewski
 

New.  Rotor working fine in L32 except when start JTDX it stops the Comm 11 for the rotor.  Rotor works fine in other programs on comm11

IC-7300 - Setting radio keyer speed from cw machine

Heribert Lennertz
 

Hi all,
this is not a question or problem just "How I did it".

In support of my laziness I did not want to use the radio multi button every time I needed to change the keyer speed of my radio. I found an appropriate CI-V command to set the keyer speed and now use these macros for the cw machine:

Set radio keyer speed

to 21 wpm: $HEXCOMMAND FE FE 94 E0 14 0C 00 96 FD$

to 24 wpm: $HEXCOMMAND FE FE 94 E0 14 0C 01 12 FD$

to 27 wpm: $HEXCOMMAND FE FE 94 E0 14 0C 01 28 FD$

Now with a single F-key press I can set my radio to one of my favorite keyer speeds. According to the manual, keyer speed can be set from 00 00=6wpm to 02 55=48wpm (relates to bold numbers in macro). Enjoy fiddling...

73 Harry, M0IHT

Re: Logger32 with Club Log problem ??

NICK K. PLUMIDAKIS
 

Dear Rick Hi.

As always Wright on target.

I made a clean install and everything is perfect.

 

TNKS

Best 73’s

Nick

SV1VS

P.S. Enjoy your fishing.

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Friday, 23 August, 2019 05:21
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Nick..

Please read the message I sent to Phill. I believe you are also not running the most current program version as your debug is referencing the same dll I mentioned to Phill. That is from an unsupported program.

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of NICK K. PLUMIDAKIS
Sent: Thursday, August 22, 2019 2:48 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Dear Eric Hi.

I will do it tomorrow morning and I will send you the results.

TNKS for the help.

Best  73’s

DE

Nick

SV1VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Thursday, 22 August, 2019 17:54
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Nick..

Your debug shows the Logsync can’t access the C:\Logger32\ClublogUpload.adi file. Look in the taskbar to see if there is another copy of LogSync running. If not make sure your Run as Administrator settings are the same as Logger32.

I would also rename your current file in the directory called C:\Logger32\ClublogUpload.adi so you can upload that file after you get things worked out. Also look and see if you have a file in your Logger32 directory called ClubLog_Dump_File.txt if you do Delete that and try things again . You Debug file should be showing a lot more information that what it does. It should be showing All your settings and flow thru the upload process and it is showing none of that.

 

After doing the above delete the current DebugLog.txt file and try another upload. Send me the debug after the upload fails.

 

73 Rick

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of NICK K. PLUMIDAKIS
Sent: Thursday, August 22, 2019 3:11 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Dear Rick Hi

This is the result from my side.

TNKS

DE

Nick

SV1VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Wednesday, 21 August, 2019 17:49
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Nick..

I’m traveling for a few days. If you would turn on Debugging and then try the upload again. After it fails turn debugging off and you will find a file in the directory you have LogSync installed to called

DebugLog.txt send me that file as an attachment so I can look and see what it says..

 

Are you running Logger32 using the Run as Administrator setting?? If so are you also running L32Logsync using the same setting??

 

73 Rick N2AMG

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of NICK K. PLUMIDAKIS
Sent: Wednesday, August 21, 2019 10:25 AM
To: hamlogger@groups.io
Subject: [hamlogger] Logger32 with Club Log problem ??

 

Hi to all.

I have the following issue-problem with the Automatic Upload to the Club Log from the N2AMG util.

When I am in FT4 and FT8 , after the QSO I am getting the following:

“”” The Club log Servers retuned the following message.”Access to this form requires a valid API key.

For more info see :https://clublog.org/need_api.php.

 

And when I am pressing the OK button :

 

There was an error in the upload process or with the uploaded file.

The contents of the   C:\Logger32|clublogUpload.adi has been transferred to C:\Logger32|ClublogNotUploaded.adi.

You will need to manually upload this file.

 

After this when I am trying to manually upload this file :

“ an Error has occurred I uploading your file to the club log Server.Please wait for a few minutes and try to upload again.The error info has been saved to DebugLog.txt file.

 

 

 

What is the wrong ?? Have I to do something that is missing from me??

 

Best 73’s

DE

Nick

SV1VS

 

Image removed by sender.

Virus-free. www.avast.com

Re: Logger32 with Club Log problem ??

Rick Ellison
 

Nick..

Please read the message I sent to Phill. I believe you are also not running the most current program version as your debug is referencing the same dll I mentioned to Phill. That is from an unsupported program.

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of NICK K. PLUMIDAKIS
Sent: Thursday, August 22, 2019 2:48 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Dear Eric Hi.

I will do it tomorrow morning and I will send you the results.

TNKS for the help.

Best  73’s

DE

Nick

SV1VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Thursday, 22 August, 2019 17:54
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Nick..

Your debug shows the Logsync can’t access the C:\Logger32\ClublogUpload.adi file. Look in the taskbar to see if there is another copy of LogSync running. If not make sure your Run as Administrator settings are the same as Logger32.

I would also rename your current file in the directory called C:\Logger32\ClublogUpload.adi so you can upload that file after you get things worked out. Also look and see if you have a file in your Logger32 directory called ClubLog_Dump_File.txt if you do Delete that and try things again . You Debug file should be showing a lot more information that what it does. It should be showing All your settings and flow thru the upload process and it is showing none of that.

 

After doing the above delete the current DebugLog.txt file and try another upload. Send me the debug after the upload fails.

 

73 Rick

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of NICK K. PLUMIDAKIS
Sent: Thursday, August 22, 2019 3:11 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Dear Rick Hi

This is the result from my side.

TNKS

DE

Nick

SV1VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Wednesday, 21 August, 2019 17:49
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Nick..

I’m traveling for a few days. If you would turn on Debugging and then try the upload again. After it fails turn debugging off and you will find a file in the directory you have LogSync installed to called

DebugLog.txt send me that file as an attachment so I can look and see what it says..

 

Are you running Logger32 using the Run as Administrator setting?? If so are you also running L32Logsync using the same setting??

 

73 Rick N2AMG

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of NICK K. PLUMIDAKIS
Sent: Wednesday, August 21, 2019 10:25 AM
To: hamlogger@groups.io
Subject: [hamlogger] Logger32 with Club Log problem ??

 

Hi to all.

I have the following issue-problem with the Automatic Upload to the Club Log from the N2AMG util.

When I am in FT4 and FT8 , after the QSO I am getting the following:

“”” The Club log Servers retuned the following message.”Access to this form requires a valid API key.

For more info see :https://clublog.org/need_api.php.

 

And when I am pressing the OK button :

 

There was an error in the upload process or with the uploaded file.

The contents of the   C:\Logger32|clublogUpload.adi has been transferred to C:\Logger32|ClublogNotUploaded.adi.

You will need to manually upload this file.

 

After this when I am trying to manually upload this file :

“ an Error has occurred I uploading your file to the club log Server.Please wait for a few minutes and try to upload again.The error info has been saved to DebugLog.txt file.

 

 

 

What is the wrong ?? Have I to do something that is missing from me??

 

Best 73’s

DE

Nick

SV1VS

 

Image removed by sender.

Virus-free. www.avast.com

Re: Logger32 with Club Log problem ??

Rick Ellison
 

Phill..

Can you send me a screenshot of the program running on your desktop. The reason I ask this and I didn’t notice it this morning looking at your Debug. In L32Logsync I am no longer using the Chilkat Dll file. All of the uploading is done thru hand coded .net call so the debug file should not have any reference to the dll. It’s kinda funny after answering your email this morning I went out fishing and as I was sitting there staring off at the water I had this image of your Debug file pop into my head and it came to me that I’m not even using that dll anymore. So I think you are loading an old version of the program and not the latest. The current .exe file should say on the top caption L32LogSync v2.0.0.5

 

Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Phill Morris (G6EES)
Sent: Thursday, August 22, 2019 1:37 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Here is the file which I should have attached to my post just now :-)

Phill, G6EES


Virus-free. www.avast.com

Re: Logger32 with LoTW problem

John Munton - G7SSE
 

On Thu, Aug 22, 2019 at 01:26 PM, Gary Hinson wrote:
PS  The Mafia isn’t A Thing in NZ … but watch out for the killer lamb gangs
Got a jar of mint sauce on stand by, just in case. 

73
John - G7SSE

Re: Logger32 with LoTW problem

Gary Hinson
 

😊

 

That’s great John, very helpful, thanks. 

 

It’ll take me a wee while to update the website though – too busy right now.

 

73,

Gary   ZL2iFB

 

PS  The Mafia isn’t A Thing in NZ … but watch out for the killer lamb gangs

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of John Munton - G7SSE
Sent: 22 August 2019 18:19
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with LoTW problem

 

Hi Gary

If I may make a couple of observations (hardhat & flameproof suit on)

"1. Export your log from Logger32 as an ADIF file. Save it somewhere memorable on disk. [You can either export the entire log, or just the QSOs marked to go to LoTW. The former makes sure all QSOs will reach LoTW and is what you do the first time, and perhaps again every few months just to be sure none are missing. The latter is quicker for subsequent updates.] "

In the quoted text above, while correct that for first time upload you export the whole log this does not change the status in the logbook of the qso's to LOTW_QSL_SENT.

To correct this the procedure explained in the Logger32 Helpfile: "Tips, Tricks and Troubleshooting / 1.13 First Time Submittal of LoTW and eQSL records" needs to be carried out.


Regarding where you mention "just the QSO's marked to go to LOTW" two points;

1. A new or unfamiliar user may not know how to mark (flag) them for export or that Logger32 can do this automatically as they are logged.

2. You do not mention that to export the marked qso's for uploading one does not use the Export Log function but the Export Files / Export LOTW File function.

I do realise you could end up, if not careful, with virtually the entire Helpfile typed out on your web site but I think Eric's issues may have stemmed from the points I've raised.

Sorry to be critical, your web site is a great resource, as are your FT8 guides.

Please don't put me on the ZL mafia's "hit list" ;-)

73
John - G7SSE

Re: Logger32 with LoTW problem

Gary Hinson
 

OK Eric, I’m on to it.

 

73

Gary   ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of erictucker599@...
Sent: 22 August 2019 22:58
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with LoTW problem

 

Gary,

I agree with John, it was a tad confusing.  Following your text, I exported the log rather than the file.  Otherwise, great website with lots of valuable help.

Many thanks for your efforts.

73, Eric G3TXZ.

Re: Logger32 with Club Log problem ??

NICK K. PLUMIDAKIS
 

Dear Eric Hi.

I will do it tomorrow morning and I will send you the results.

TNKS for the help.

Best  73’s

DE

Nick

SV1VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Thursday, 22 August, 2019 17:54
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Nick..

Your debug shows the Logsync can’t access the C:\Logger32\ClublogUpload.adi file. Look in the taskbar to see if there is another copy of LogSync running. If not make sure your Run as Administrator settings are the same as Logger32.

I would also rename your current file in the directory called C:\Logger32\ClublogUpload.adi so you can upload that file after you get things worked out. Also look and see if you have a file in your Logger32 directory called ClubLog_Dump_File.txt if you do Delete that and try things again . You Debug file should be showing a lot more information that what it does. It should be showing All your settings and flow thru the upload process and it is showing none of that.

 

After doing the above delete the current DebugLog.txt file and try another upload. Send me the debug after the upload fails.

 

73 Rick

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of NICK K. PLUMIDAKIS
Sent: Thursday, August 22, 2019 3:11 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Dear Rick Hi

This is the result from my side.

TNKS

DE

Nick

SV1VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Wednesday, 21 August, 2019 17:49
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Nick..

I’m traveling for a few days. If you would turn on Debugging and then try the upload again. After it fails turn debugging off and you will find a file in the directory you have LogSync installed to called

DebugLog.txt send me that file as an attachment so I can look and see what it says..

 

Are you running Logger32 using the Run as Administrator setting?? If so are you also running L32Logsync using the same setting??

 

73 Rick N2AMG

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of NICK K. PLUMIDAKIS
Sent: Wednesday, August 21, 2019 10:25 AM
To: hamlogger@groups.io
Subject: [hamlogger] Logger32 with Club Log problem ??

 

Hi to all.

I have the following issue-problem with the Automatic Upload to the Club Log from the N2AMG util.

When I am in FT4 and FT8 , after the QSO I am getting the following:

“”” The Club log Servers retuned the following message.”Access to this form requires a valid API key.

For more info see :https://clublog.org/need_api.php.

 

And when I am pressing the OK button :

 

There was an error in the upload process or with the uploaded file.

The contents of the   C:\Logger32|clublogUpload.adi has been transferred to C:\Logger32|ClublogNotUploaded.adi.

You will need to manually upload this file.

 

After this when I am trying to manually upload this file :

“ an Error has occurred I uploading your file to the club log Server.Please wait for a few minutes and try to upload again.The error info has been saved to DebugLog.txt file.

 

 

 

What is the wrong ?? Have I to do something that is missing from me??

 

Best 73’s

DE

Nick

SV1VS

 

Image removed by sender.

Virus-free. www.avast.com

Re: Logger32 with Club Log problem ??

Phill Morris (G6EES)
 

Here is the file which I should have attached to my post just now :-)

Phill, G6EES

Re: Logger32 with Club Log problem ??

Phill Morris (G6EES)
 

Rick
Thanks for the reply.
I searched for and deleted all instances (1) of DebugLog.txt and started the ClubLog Sync again.
Same error.
It generated a new DebugLog.txt which (as before) it placed on my desktop.
The content of this file is exactly the same as before (copy attached)

I did another search of the whole PC and there are no other files called DebugLog.txt
It's strange that the content of the file does not give any more error information.

Any ideas what to do next :-)

Phill, G6EES

Re: Zip databases and logbook error 503

Martin J.K.
 

Thanks Bob.
I have to ask for help from my friend who is much better
with computers than me.

73
Martin 9A2JK


On 22.8.2019. 15:32, Bob wrote:

Martin, I have looked at the code carefully. When you right click on the Logger32 time pane (at the left of the lower status bar) it shows three menu options. But, before it shows the menus, it tries to load the time zones from the registry again - This is to make sure the user has not changed any PC time zone settings. So, it appears you PC is not allowing Logger32 to read the time zone registry entries. I assume this has not always been the case otherwise you would have seen this before ... this again all points to the security/anti-virus settings on your PC. SeventyThree(s).

On August 22, 2019 at 8:37 AM Bob <k4cy@...> wrote:

Martin, first you fix the registry ... The error message is explicit:


Registry problem?
Unable to locate Time Zones information in Registry under the key:
Software\Microsoft\Windows NT\CurrentVersion\Time Zones


With no time zone information, many of the timekeeping functions of Logger32 will not work. 73.

On August 22, 2019 at 7:32 AM "Martin J.K." <martin.svaco@...> wrote:

Jim, I have two users accounts on my PC: admin and standard user.
I normally work as a standard user.

Bob, I was to early with conclusion.
After setting L32 to run as admin ***and after hardware reset***
the L32 is not asking for admin password anymore.

Now, when starting L32 I have another error message:

Registry problem?
Unable to locate Time Zones information in Registry under the key:
Software\Microsoft\Windows NT\CurrentVersion\Time Zones

I have to click on OK for L32 to open.
After that it seems that all is OK except one thing.

L32 shows correct local and UTC time but when I right click on L32
time (in left lower corner) I have new error message:

Run-time error '5':
Invalid procedure call or argument.

Clicking on OK crashes the program.

73
Martin 9A2JK


On 21.8.2019. 17:02, Jim Altman wrote:

Yes, you are not an administrator.  Go to Control Panel -> Users -> your username -> properties and give yourself administrative privileges.  No more password required.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Martin J.K.
Sent: Wednesday, August 21, 2019 9:22 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Zip databases and logbook error 503

 

I did exactly as instructed but still I have to provide administrator password.
I think that I have messed up something in administrator and standard user set up while installing
Windows 7 on this PC about a year ago. As everything else is working OK (or I think so) providing
admin password is not a trouble for me.

Thanks and 73
Martin 9A2JK

On 21.8.2019. 15:08, Bob wrote:

Try this: With Windows explorer, find Logger32.exe in the \Logger32 directory. Right click on the Logger32.exe icon. From the menu choose PROPERTIES. When the properties window opens, select the COMPATIBILITY tab. Click the CHANGE SETTINGS FOR ALL USERS button. When the new Window opens, check the  RUN THIS PROGRAM AS AN ADMINISTRATOR option. Click APPLY then OK. Then click OK to close the properties window. Now Logger32 will automagically run as an administrator when it starts. SeventyThree(s).

On August 21, 2019 at 8:01 AM "Martin J.K." <martin.svaco@...> wrote:

Bob, I have been running this PC as standard user for some time without any troubles.
UAC was set to default.

I have turned off the UAC (to ''Never notify'') now.
Also I set up ''Run this program as an administrator'' now.

All is OK. No more error messages.

Now, I am running this PC as standard user, UAC off and Logger32 as administrator.
The only nuisance is that I have to provide administrator password every time I start Logger32.
But it is only one time per day and I can live with that.

Thanks again and 73
Martin 9A2JK

On 21.8.2019. 13:03, Bob wrote:

Martin, you said: The backup file name is LOGBOOKBACKUP_9A2JK_FULL_011.ZIP When backing up your logbook & databases, Logger32 keeps the most recent 10 copies of your backup. The first time you make a backup. it is called <whatever name>_001.ZIP. Your next backup will be called <whatever name>_002.ZIP. This continues until you get to <whatever name>_011.ZIP. Then, after _011.ZIP is created, _001.ZIP is deleted and _002.ZIP is renamed _001.ZIP, _003.ZIP is renamed _002.ZIP, _004.zip is renamed _003.ZIP .... etc ... finally the newly created _011.ZIP is renamed _010.ZIP ... So you always have the last 10 backups with _010.ZIP bein the most recent.

 

There have been no changes to the backup process for many years, and certainly noting done for version 3.50.392. So, what is not working? I suspect your PC security settings or anti-virus software is preventing Logger32 from renaming/deleting older copies of your backup.zip files. So the backup process just created _011.ZIP. Logger32 tried to rename it to _010.ZIP (and rename all the other old backups as well). Clicking the VERIFY button fails because it is looking for a file _010.ZIP that doesn't exist. SeventyThree(s).

On August 21, 2019 at 4:10 AM "Martin J.K." <martin.svaco@...> wrote:

Hi Bob

I regularly backup my logbook to ZIP file clicking on Zip Logbook icon
and verify ZIP file after each backup.  

All is OK although version  .392 reports error in ZIP file:
 ''Unsuccessful. Error # 503 occurred. Description :  Cannot open zip file.''

OS is Windows 7 Professional 64-bit.

The backup file name is LOGBOOKBACKUP_9A2JK_FULL_011.ZIP
size of around 13 k and I CAN open it.

It looks OK for me but I am not sure.
There are 24 files in it:

Log\9A2JK.ism
Log\9A2JK.isd
Log\9A2JK.isf
offset32.isd
offset32.ism
Alias32.isd
Alias32.isf
Alias32.ism
IOTAIsland32.isd
IOTAIsland32.ism
IOTAIsland32.isf
IOTA32.isd
IOTA32.ism
Country32.isd
Country32.ism
IOTA32.isf
Country32.isf
PrimaryAdmin32.isd
PrimaryAdmin32.ism
offset32.isf
SecondaryAdmin32.isd
SecondaryAdmin32.ism
SecondaryAdmin32.isf
PrimaryAdmin32.isf

=================
BTW Backup user file verifies without error.

LOGGER32BACKUP.ZIP:

Logger32.INI
MyBandMode32.db
MMVARISoundCardMacros.ini
SoundCardMacros.ini
TelnetAddresses.INI
DataTerminal.ini
RadioPanel.ini
UserPara.ini
Arrlsect.db
BandMode32.db

It is not a problem for me as long as all files are in backup zip file.
Thank you for a great software.

73
Martin 9A2JK


 


 

 


 


 

 



 


 


 


Re: Zip databases and logbook error 503

Martin J.K.
 

My apology Jim.
I was talking about Logger32 clock,  **left** hand corner of Logger32 window.

Thanks and 73
Martin 9A2JK


On 22.8.2019. 14:00, Jim Altman wrote:

Ummm, that’s weird.  I am talking about the windows clock.  Try it without l32 open.  Its access to the clock (perhaps among other reasons) that requires the Admin privileges in l32.

 

73

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Martin J.K.
Sent: Thursday, August 22, 2019 7:57 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Zip databases and logbook error 503

 

Jim, L32 displays correct local and UTC time.
Right mouse click on the clock in the right hand corner of the screen crashes Logger32 with error message:

Run-time error '5':
Invalid procedure call or argument.

Thanks anyway.

73
Martin 9A2JK

On 22.8.2019. 13:49, Jim Altman wrote:

Right mouse click on the clock in the lower right hand corner of the screen.  Go to ‘Adjust Date/Time’, check your time zone settings.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Martin J.K.
Sent: Thursday, August 22, 2019 7:33 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Zip databases and logbook error 503

 

Jim, I have two users accounts on my PC: admin and standard user.
I normally work as a standard user.

Bob, I was to early with conclusion.
After setting L32 to run as admin ***and after hardware reset***
the L32 is not asking for admin password anymore.

Now, when starting L32 I have another error message:

Registry problem?
Unable to locate Time Zones information in Registry under the key:
Software\Microsoft\Windows NT\CurrentVersion\Time Zones

I have to click on OK for L32 to open.
After that it seems that all is OK except one thing.

L32 shows correct local and UTC time but when I right click on L32
time (in left lower corner) I have new error message:

Run-time error '5':
Invalid procedure call or argument.

Clicking on OK crashes the program.

73
Martin 9A2JK

On 21.8.2019. 17:02, Jim Altman wrote:

Yes, you are not an administrator.  Go to Control Panel -> Users -> your username -> properties and give yourself administrative privileges.  No more password required.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Martin J.K.
Sent: Wednesday, August 21, 2019 9:22 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Zip databases and logbook error 503

 

I did exactly as instructed but still I have to provide administrator password.
I think that I have messed up something in administrator and standard user set up while installing
Windows 7 on this PC about a year ago. As everything else is working OK (or I think so) providing
admin password is not a trouble for me.

Thanks and 73
Martin 9A2JK

On 21.8.2019. 15:08, Bob wrote:

Try this: With Windows explorer, find Logger32.exe in the \Logger32 directory. Right click on the Logger32.exe icon. From the menu choose PROPERTIES. When the properties window opens, select the COMPATIBILITY tab. Click the CHANGE SETTINGS FOR ALL USERS button. When the new Window opens, check the  RUN THIS PROGRAM AS AN ADMINISTRATOR option. Click APPLY then OK. Then click OK to close the properties window. Now Logger32 will automagically run as an administrator when it starts. SeventyThree(s).

On August 21, 2019 at 8:01 AM "Martin J.K." <martin.svaco@...> wrote:

Bob, I have been running this PC as standard user for some time without any troubles.
UAC was set to default.

I have turned off the UAC (to ''Never notify'') now.
Also I set up ''Run this program as an administrator'' now.

All is OK. No more error messages.

Now, I am running this PC as standard user, UAC off and Logger32 as administrator.
The only nuisance is that I have to provide administrator password every time I start Logger32.
But it is only one time per day and I can live with that.

Thanks again and 73
Martin 9A2JK

On 21.8.2019. 13:03, Bob wrote:

Martin, you said: The backup file name is LOGBOOKBACKUP_9A2JK_FULL_011.ZIP When backing up your logbook & databases, Logger32 keeps the most recent 10 copies of your backup. The first time you make a backup. it is called <whatever name>_001.ZIP. Your next backup will be called <whatever name>_002.ZIP. This continues until you get to <whatever name>_011.ZIP. Then, after _011.ZIP is created, _001.ZIP is deleted and _002.ZIP is renamed _001.ZIP, _003.ZIP is renamed _002.ZIP, _004.zip is renamed _003.ZIP .... etc ... finally the newly created _011.ZIP is renamed _010.ZIP ... So you always have the last 10 backups with _010.ZIP bein the most recent.

 

There have been no changes to the backup process for many years, and certainly noting done for version 3.50.392. So, what is not working? I suspect your PC security settings or anti-virus software is preventing Logger32 from renaming/deleting older copies of your backup.zip files. So the backup process just created _011.ZIP. Logger32 tried to rename it to _010.ZIP (and rename all the other old backups as well). Clicking the VERIFY button fails because it is looking for a file _010.ZIP that doesn't exist. SeventyThree(s).

On August 21, 2019 at 4:10 AM "Martin J.K." <martin.svaco@...> wrote:

Hi Bob

I regularly backup my logbook to ZIP file clicking on Zip Logbook icon
and verify ZIP file after each backup.  

All is OK although version  .392 reports error in ZIP file:
 ''Unsuccessful. Error # 503 occurred. Description :  Cannot open zip file.''

OS is Windows 7 Professional 64-bit.

The backup file name is LOGBOOKBACKUP_9A2JK_FULL_011.ZIP
size of around 13 k and I CAN open it.

It looks OK for me but I am not sure.
There are 24 files in it:

Log\9A2JK.ism
Log\9A2JK.isd
Log\9A2JK.isf
offset32.isd
offset32.ism
Alias32.isd
Alias32.isf
Alias32.ism
IOTAIsland32.isd
IOTAIsland32.ism
IOTAIsland32.isf
IOTA32.isd
IOTA32.ism
Country32.isd
Country32.ism
IOTA32.isf
Country32.isf
PrimaryAdmin32.isd
PrimaryAdmin32.ism
offset32.isf
SecondaryAdmin32.isd
SecondaryAdmin32.ism
SecondaryAdmin32.isf
PrimaryAdmin32.isf

=================
BTW Backup user file verifies without error.

LOGGER32BACKUP.ZIP:

Logger32.INI
MyBandMode32.db
MMVARISoundCardMacros.ini
SoundCardMacros.ini
TelnetAddresses.INI
DataTerminal.ini
RadioPanel.ini
UserPara.ini
Arrlsect.db
BandMode32.db

It is not a problem for me as long as all files are in backup zip file.
Thank you for a great software.

73
Martin 9A2JK


 


 

 


 


 

 

 

 


Re: Logger32 with Club Log problem ??

Rick Ellison
 

Nick..

Your debug shows the Logsync can’t access the C:\Logger32\ClublogUpload.adi file. Look in the taskbar to see if there is another copy of LogSync running. If not make sure your Run as Administrator settings are the same as Logger32.

I would also rename your current file in the directory called C:\Logger32\ClublogUpload.adi so you can upload that file after you get things worked out. Also look and see if you have a file in your Logger32 directory called ClubLog_Dump_File.txt if you do Delete that and try things again . You Debug file should be showing a lot more information that what it does. It should be showing All your settings and flow thru the upload process and it is showing none of that.

 

After doing the above delete the current DebugLog.txt file and try another upload. Send me the debug after the upload fails.

 

73 Rick

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of NICK K. PLUMIDAKIS
Sent: Thursday, August 22, 2019 3:11 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Dear Rick Hi

This is the result from my side.

TNKS

DE

Nick

SV1VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Wednesday, 21 August, 2019 17:49
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

Nick..

I’m traveling for a few days. If you would turn on Debugging and then try the upload again. After it fails turn debugging off and you will find a file in the directory you have LogSync installed to called

DebugLog.txt send me that file as an attachment so I can look and see what it says..

 

Are you running Logger32 using the Run as Administrator setting?? If so are you also running L32Logsync using the same setting??

 

73 Rick N2AMG

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of NICK K. PLUMIDAKIS
Sent: Wednesday, August 21, 2019 10:25 AM
To: hamlogger@groups.io
Subject: [hamlogger] Logger32 with Club Log problem ??

 

Hi to all.

I have the following issue-problem with the Automatic Upload to the Club Log from the N2AMG util.

When I am in FT4 and FT8 , after the QSO I am getting the following:

“”” The Club log Servers retuned the following message.”Access to this form requires a valid API key.

For more info see :https://clublog.org/need_api.php.

 

And when I am pressing the OK button :

 

There was an error in the upload process or with the uploaded file.

The contents of the   C:\Logger32|clublogUpload.adi has been transferred to C:\Logger32|ClublogNotUploaded.adi.

You will need to manually upload this file.

 

After this when I am trying to manually upload this file :

“ an Error has occurred I uploading your file to the club log Server.Please wait for a few minutes and try to upload again.The error info has been saved to DebugLog.txt file.

 

 

 

What is the wrong ?? Have I to do something that is missing from me??

 

Best 73’s

DE

Nick

SV1VS

 

Image removed by sender.

Virus-free. www.avast.com

Re: Logger32 with Club Log problem ??

Rick Ellison
 

Phill.

Delete the DebugLog.txt file and try an upload again. There should be a lot more information written in the DebugLog file. What was in there just shows the dll information but shows me nothing of the loaded program settings or anything else like that follows the upload..

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Phill Morris (G6EES)
Sent: Thursday, August 22, 2019 6:55 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 with Club Log problem ??

 

I am having the same problem.

This is what I have done to try to fix it (with no luck)

1) I have uninstalled and reinstalled the Logger32 LOTW/ESQL Utility, ie  L32 LogSync
2) In the properties/compatibility of L32 LogSync.exe, I have selected the box to 'Run this program as an administrator'
3) Logger32 is configured to Run as Administrator
4) The WIN10 login is also as an Administrator
5) I have exported the complete log from Logger32 as an ADIF and then selected this file in the Logger32 LOTW/ESQL Utility and then pressed the button "Process and Upload to Club Log". I then get the attached error message.
6) With "Enable ClubLog Utility" enabled and I enter a new QSO, I get the same error messages

So the problem occurs if I automatically upload to ClubLog or if I try to do this manually
Sync to eQSL is all OK

Error messages (2) and DebugLog.txt files are attached

Your help will certainly be appreciated :-)

Phill, G6EES


Virus-free. www.avast.com

Re: Zip databases and logbook error 503

Bob <k4cy@...>
 

Martin, I have looked at the code carefully. When you right click on the Logger32 time pane (at the left of the lower status bar) it shows three menu options. But, before it shows the menus, it tries to load the time zones from the registry again - This is to make sure the user has not changed any PC time zone settings. So, it appears you PC is not allowing Logger32 to read the time zone registry entries. I assume this has not always been the case otherwise you would have seen this before ... this again all points to the security/anti-virus settings on your PC. SeventyThree(s).

On August 22, 2019 at 8:37 AM Bob <k4cy@...> wrote:

Martin, first you fix the registry ... The error message is explicit:


Registry problem?
Unable to locate Time Zones information in Registry under the key:
Software\Microsoft\Windows NT\CurrentVersion\Time Zones


With no time zone information, many of the timekeeping functions of Logger32 will not work. 73.

On August 22, 2019 at 7:32 AM "Martin J.K." <martin.svaco@...> wrote:

Jim, I have two users accounts on my PC: admin and standard user.
I normally work as a standard user.

Bob, I was to early with conclusion.
After setting L32 to run as admin ***and after hardware reset***
the L32 is not asking for admin password anymore.

Now, when starting L32 I have another error message:

Registry problem?
Unable to locate Time Zones information in Registry under the key:
Software\Microsoft\Windows NT\CurrentVersion\Time Zones

I have to click on OK for L32 to open.
After that it seems that all is OK except one thing.

L32 shows correct local and UTC time but when I right click on L32
time (in left lower corner) I have new error message:

Run-time error '5':
Invalid procedure call or argument.

Clicking on OK crashes the program.

73
Martin 9A2JK


On 21.8.2019. 17:02, Jim Altman wrote:

Yes, you are not an administrator.  Go to Control Panel -> Users -> your username -> properties and give yourself administrative privileges.  No more password required.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Martin J.K.
Sent: Wednesday, August 21, 2019 9:22 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Zip databases and logbook error 503

 

I did exactly as instructed but still I have to provide administrator password.
I think that I have messed up something in administrator and standard user set up while installing
Windows 7 on this PC about a year ago. As everything else is working OK (or I think so) providing
admin password is not a trouble for me.

Thanks and 73
Martin 9A2JK

On 21.8.2019. 15:08, Bob wrote:

Try this: With Windows explorer, find Logger32.exe in the \Logger32 directory. Right click on the Logger32.exe icon. From the menu choose PROPERTIES. When the properties window opens, select the COMPATIBILITY tab. Click the CHANGE SETTINGS FOR ALL USERS button. When the new Window opens, check the  RUN THIS PROGRAM AS AN ADMINISTRATOR option. Click APPLY then OK. Then click OK to close the properties window. Now Logger32 will automagically run as an administrator when it starts. SeventyThree(s).

On August 21, 2019 at 8:01 AM "Martin J.K." <martin.svaco@...> wrote:

Bob, I have been running this PC as standard user for some time without any troubles.
UAC was set to default.

I have turned off the UAC (to ''Never notify'') now.
Also I set up ''Run this program as an administrator'' now.

All is OK. No more error messages.

Now, I am running this PC as standard user, UAC off and Logger32 as administrator.
The only nuisance is that I have to provide administrator password every time I start Logger32.
But it is only one time per day and I can live with that.

Thanks again and 73
Martin 9A2JK

On 21.8.2019. 13:03, Bob wrote:

Martin, you said: The backup file name is LOGBOOKBACKUP_9A2JK_FULL_011.ZIP When backing up your logbook & databases, Logger32 keeps the most recent 10 copies of your backup. The first time you make a backup. it is called <whatever name>_001.ZIP. Your next backup will be called <whatever name>_002.ZIP. This continues until you get to <whatever name>_011.ZIP. Then, after _011.ZIP is created, _001.ZIP is deleted and _002.ZIP is renamed _001.ZIP, _003.ZIP is renamed _002.ZIP, _004.zip is renamed _003.ZIP .... etc ... finally the newly created _011.ZIP is renamed _010.ZIP ... So you always have the last 10 backups with _010.ZIP bein the most recent.

 

There have been no changes to the backup process for many years, and certainly noting done for version 3.50.392. So, what is not working? I suspect your PC security settings or anti-virus software is preventing Logger32 from renaming/deleting older copies of your backup.zip files. So the backup process just created _011.ZIP. Logger32 tried to rename it to _010.ZIP (and rename all the other old backups as well). Clicking the VERIFY button fails because it is looking for a file _010.ZIP that doesn't exist. SeventyThree(s).

On August 21, 2019 at 4:10 AM "Martin J.K." <martin.svaco@...> wrote:

Hi Bob

I regularly backup my logbook to ZIP file clicking on Zip Logbook icon
and verify ZIP file after each backup.  

All is OK although version  .392 reports error in ZIP file:
 ''Unsuccessful. Error # 503 occurred. Description :  Cannot open zip file.''

OS is Windows 7 Professional 64-bit.

The backup file name is LOGBOOKBACKUP_9A2JK_FULL_011.ZIP
size of around 13 k and I CAN open it.

It looks OK for me but I am not sure.
There are 24 files in it:

Log\9A2JK.ism
Log\9A2JK.isd
Log\9A2JK.isf
offset32.isd
offset32.ism
Alias32.isd
Alias32.isf
Alias32.ism
IOTAIsland32.isd
IOTAIsland32.ism
IOTAIsland32.isf
IOTA32.isd
IOTA32.ism
Country32.isd
Country32.ism
IOTA32.isf
Country32.isf
PrimaryAdmin32.isd
PrimaryAdmin32.ism
offset32.isf
SecondaryAdmin32.isd
SecondaryAdmin32.ism
SecondaryAdmin32.isf
PrimaryAdmin32.isf

=================
BTW Backup user file verifies without error.

LOGGER32BACKUP.ZIP:

Logger32.INI
MyBandMode32.db
MMVARISoundCardMacros.ini
SoundCardMacros.ini
TelnetAddresses.INI
DataTerminal.ini
RadioPanel.ini
UserPara.ini
Arrlsect.db
BandMode32.db

It is not a problem for me as long as all files are in backup zip file.
Thank you for a great software.

73
Martin 9A2JK