Date   
Telnet socket closed...

Jim Dawson
 

My connection to the DX cluster failed to connect and says the telnet socket is closed. I have tried restarting logger32, then restarted the computer, it still doesn't work. How do I fix it? Windows 10.

Thanks de, Jim - K9DD

ODP: ODP: ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes

Andy VA3PL
 

Hi Bob
I was afraid of updating because I thought that I will loose FT8 auto logging.
After your suggestion of updating I did and both FT8 auto logging and Country database exceptions from ClubLog work as expected.
Thank you my friend for such a good logging program. I am with you for many years now.

73 de Andy


Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika Bob <k4cy@...>
Wysłane: czwartek, 25 lipca 2019 16:30
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: ODP: ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

Andy, the Club Log exceptions download and update is completely changed since 3.50.384. You should update. Is Logger32 setup to run as an administrator? 73.

On July 25, 2019 at 10:16 AM Andy VA3PL <va3pl@...> wrote:

Hi Bob
I think I have setup problem so it is perhaps something stupid I did.
I am using 3.50.384. It is older version but I have a reason not too update.
Andy SP9KR

 


Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika Bob <k4cy@...>
Wysłane: czwartek, 25 lipca 2019 13:37
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

What version of Logger32 are you using? 73.

On July 25, 2019 at 7:23 AM Andy VA3PL <va3pl@...> wrote:

Replay from ClubLog goes so fast that last sentence I was able to read was "Deleting all prefixes" and after this Logger32 close.

Andy SP9KR

 

Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika ja1nlx <ayoshida0205@...>
Wysłane: czwartek, 25 lipca 2019 10:21
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

Andy

When Logger32 crash ?

What message you see ?

73

On 2019/07/25 16:34, Andy None via Groups.Io wrote:
Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR
--
73 de aki
JA1NLX


 


 


 


 

Re: ODP: ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes

Bob
 

Andy, the Club Log exceptions download and update is completely changed since 3.50.384. You should update. Is Logger32 setup to run as an administrator? 73.

On July 25, 2019 at 10:16 AM Andy VA3PL <va3pl@...> wrote:

Hi Bob
I think I have setup problem so it is perhaps something stupid I did.
I am using 3.50.384. It is older version but I have a reason not too update.
Andy SP9KR

 


Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika Bob <k4cy@...>
Wysłane: czwartek, 25 lipca 2019 13:37
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

What version of Logger32 are you using? 73.

On July 25, 2019 at 7:23 AM Andy VA3PL <va3pl@...> wrote:

Replay from ClubLog goes so fast that last sentence I was able to read was "Deleting all prefixes" and after this Logger32 close.

Andy SP9KR

 

Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika ja1nlx <ayoshida0205@...>
Wysłane: czwartek, 25 lipca 2019 10:21
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

Andy

When Logger32 crash ?

What message you see ?

73

On 2019/07/25 16:34, Andy None via Groups.Io wrote:
Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR
--
73 de aki
JA1NLX


 


 


 


 

Re: CW Machine

Gerald Boutin
 

Albert,

Does the same problem occur even if you do not start the Logger32 program, but just run the cw.exe program by itself?

If you are using the cw.exe program on a secondary display monitor, when minimized, it will minimize to the primary monitor display.

--
Gerald, VE1DT

ODP: ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes

Andy VA3PL
 

Hi Bob
I think I have setup problem so it is perhaps something stupid I did.
I am using 3.50.384. It is older version but I have a reason not too update.
Andy SP9KR



Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika Bob <k4cy@...>
Wysłane: czwartek, 25 lipca 2019 13:37
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

What version of Logger32 are you using? 73.

On July 25, 2019 at 7:23 AM Andy VA3PL <va3pl@...> wrote:

Replay from ClubLog goes so fast that last sentence I was able to read was "Deleting all prefixes" and after this Logger32 close.

Andy SP9KR

 

Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika ja1nlx <ayoshida0205@...>
Wysłane: czwartek, 25 lipca 2019 10:21
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

Andy

When Logger32 crash ?

What message you see ?

73

On 2019/07/25 16:34, Andy None via Groups.Io wrote:
Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR
--
73 de aki
JA1NLX


 


 

Re: CW Machine

ja1nlx
 

Albert

Sorry but I have no more suggestion. It works as expected here.

73

On 2019/07/25 20:54, Albert Crespo wrote:

 

Aki,

I deleted the CW.ini

Opened the program and the reconfigured the CW machine. Same issue. Minimize, and then it disappears.

It created a new CW.ini file.

I then went into the program and ran the CW machine as an adminsirator. It appeared, but would no longer key as before the TX so this is not a solution.

Seems it needs not to be minimized and just left alone and not use the computer for anything othen  then this program. That is not a problem for me as I have two computers with one just for radio. If I only had one computer, this would be a greater nonsense.

As in my first posting, this problem is with both computers so it is not a one off issue with just one computer.

Thanks for your assitance!

73, Albert

 

 

 

> Message du 25/07/19 13:22
> De : "ja1nlx" <ayoshida0205@...>
> A : hamlogger@groups.io
> Copie à :
> Objet : Re: [hamlogger] CW Machine
>
>

> Yes try that.

> 73
>

On 2019/07/25 20:18, Albert Crespo wrote:
>

> Aki,

> See attched- I see nothing.

> Notice also on the tool bar, I cannot activate the CW machine from there.

> Are you suggesting I delete my CW.ini file and then run the machine?

> Albert

>  

>  

>  

>  

> Message du 25/07/19 12:19
> > De : "ja1nlx" <ayoshida0205@...>
> > A : hamlogger@groups.io
> > Copie à :
> > Objet : Re: [hamlogger] CW Machine
> >
> >

> > Albert

> > I see like this when clicking minimized button in CW machine.

> >

> > Do you really see nothing ?

> > and try to run CW machine after deleting CW.ini.
> >

> > 73
> >


> >
On 2019/07/25 18:09, Albert Crespo wrote:
> >

> >  Aki,

> >  

> > After minimizing the CW machine, I went into the Logger 32 and opened the CW machine as an administrator and it came back. It however, will not move and cannot minimize without it disappearing again.

> > This suggestion is a big help as I do not need to reboot the program to get the machine back.

> > For years I have used the CW machine and did not have this problem.

> > If I open a browser  the CW machine appears. This is why I want to minimize the machine.

> > I will sent a picture.Albert

> >  

> Message du 25/07/19 10:22
> > > De : "ja1nlx" <ayoshida0205@...>
> > > A : hamlogger@groups.io
> > > Copie à :
> > > Objet : Re: [hamlogger] CW Machine
> > >
> > >

> > > Set CW.exe to run as administrator if not.

> > > 73
> > >

On 2019/07/25 16:07, Albert Crespo wrote:
> > >

> > > Have the latest version of Logger 32 installed on two Windows 10 computers.

> > > When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

> > > I have closed the  program and restarted it, but  the same problem happens again.

> > > Is this a bug now with the CW machine that the window cannot be minimized?

> > > .

> > >  

_,_
--
> > > 73 de aki
> > > JA1NLX
--
> > 73 de aki
> > JA1NLX
--
> 73 de aki
> JA1NLX
--
73 de aki
JA1NLX

Re: CW Machine

Albert Crespo
 

 

Aki,

I deleted the CW.ini

Opened the program and the reconfigured the CW machine. Same issue. Minimize, and then it disappears.

It created a new CW.ini file.

I then went into the program and ran the CW machine as an adminsirator. It appeared, but would no longer key as before the TX so this is not a solution.

Seems it needs not to be minimized and just left alone and not use the computer for anything othen  then this program. That is not a problem for me as I have two computers with one just for radio. If I only had one computer, this would be a greater nonsense.

As in my first posting, this problem is with both computers so it is not a one off issue with just one computer.

Thanks for your assitance!

73, Albert

 

 

 

> Message du 25/07/19 13:22
> De : "ja1nlx" <ayoshida0205@...>
> A : hamlogger@groups.io
> Copie à :
> Objet : Re: [hamlogger] CW Machine
>
>

> Yes try that.

> 73
>

On 2019/07/25 20:18, Albert Crespo wrote:
>

> Aki,

> See attched- I see nothing.

> Notice also on the tool bar, I cannot activate the CW machine from there.

> Are you suggesting I delete my CW.ini file and then run the machine?

> Albert

>  

>  

>  

>  

> Message du 25/07/19 12:19
> > De : "ja1nlx" <ayoshida0205@...>
> > A : hamlogger@groups.io
> > Copie à :
> > Objet : Re: [hamlogger] CW Machine
> >
> >

> > Albert

> > I see like this when clicking minimized button in CW machine.

> >

> > Do you really see nothing ?

> > and try to run CW machine after deleting CW.ini.
> >

> > 73
> >


> >
On 2019/07/25 18:09, Albert Crespo wrote:
> >

> >  Aki,

> >  

> > After minimizing the CW machine, I went into the Logger 32 and opened the CW machine as an administrator and it came back. It however, will not move and cannot minimize without it disappearing again.

> > This suggestion is a big help as I do not need to reboot the program to get the machine back.

> > For years I have used the CW machine and did not have this problem.

> > If I open a browser  the CW machine appears. This is why I want to minimize the machine.

> > I will sent a picture.Albert

> >  

> Message du 25/07/19 10:22
> > > De : "ja1nlx" <ayoshida0205@...>
> > > A : hamlogger@groups.io
> > > Copie à :
> > > Objet : Re: [hamlogger] CW Machine
> > >
> > >

> > > Set CW.exe to run as administrator if not.

> > > 73
> > >

On 2019/07/25 16:07, Albert Crespo wrote:
> > >

> > > Have the latest version of Logger 32 installed on two Windows 10 computers.

> > > When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

> > > I have closed the  program and restarted it, but  the same problem happens again.

> > > Is this a bug now with the CW machine that the window cannot be minimized?

> > > .

> > >  

_,_
--
> > > 73 de aki
> > > JA1NLX
--
> > 73 de aki
> > JA1NLX
--
> 73 de aki
> JA1NLX

Re: ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes

Bob
 

What version of Logger32 are you using? 73.

On July 25, 2019 at 7:23 AM Andy VA3PL <va3pl@...> wrote:

Replay from ClubLog goes so fast that last sentence I was able to read was "Deleting all prefixes" and after this Logger32 close.

Andy SP9KR

 

Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika ja1nlx <ayoshida0205@...>
Wysłane: czwartek, 25 lipca 2019 10:21
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

Andy

When Logger32 crash ?

What message you see ?

73

On 2019/07/25 16:34, Andy None via Groups.Io wrote:
Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR
--
73 de aki
JA1NLX


 


 

ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes

Andy VA3PL
 

Replay from ClubLog goes so fast that last sentence I was able to read was "Deleting all prefixes" and after this Logger32 close.

Andy SP9KR


Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika ja1nlx <ayoshida0205@...>
Wysłane: czwartek, 25 lipca 2019 10:21
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

Andy

When Logger32 crash ?

What message you see ?

73

On 2019/07/25 16:34, Andy None via Groups.Io wrote:
Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR
--
73 de aki
JA1NLX

Re: CW Machine

ja1nlx
 

Yes try that.

73

On 2019/07/25 20:18, Albert Crespo wrote:

Aki,

See attched- I see nothing.

Notice also on the tool bar, I cannot activate the CW machine from there.

Are you suggesting I delete my CW.ini file and then run the machine?

Albert

 

 

 

 

> Message du 25/07/19 12:19
> De : "ja1nlx" <ayoshida0205@...>
> A : hamlogger@groups.io
> Copie à :
> Objet : Re: [hamlogger] CW Machine
>
>

> Albert

> I see like this when clicking minimized button in CW machine.

>

> Do you really see nothing ?

> and try to run CW machine after deleting CW.ini.
>

> 73
>


>
On 2019/07/25 18:09, Albert Crespo wrote:
>

>  Aki,

>  

> After minimizing the CW machine, I went into the Logger 32 and opened the CW machine as an administrator and it came back. It however, will not move and cannot minimize without it disappearing again.

> This suggestion is a big help as I do not need to reboot the program to get the machine back.

> For years I have used the CW machine and did not have this problem.

> If I open a browser  the CW machine appears. This is why I want to minimize the machine.

> I will sent a picture.Albert

>  

> Message du 25/07/19 10:22
> > De : "ja1nlx" <ayoshida0205@...>
> > A : hamlogger@groups.io
> > Copie à :
> > Objet : Re: [hamlogger] CW Machine
> >
> >

> > Set CW.exe to run as administrator if not.

> > 73
> >

On 2019/07/25 16:07, Albert Crespo wrote:
> >

> > Have the latest version of Logger 32 installed on two Windows 10 computers.

> > When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

> > I have closed the  program and restarted it, but  the same problem happens again.

> > Is this a bug now with the CW machine that the window cannot be minimized?

> > .

> >  

_,_
--
> > 73 de aki
> > JA1NLX
--
> 73 de aki
> JA1NLX
--
73 de aki
JA1NLX

Re: CW Machine

Albert Crespo
 

Aki,

See attched- I see nothing.

Notice also on the tool bar, I cannot activate the CW machine from there.

Are you suggesting I delete my CW.ini file and then run the machine?

Albert

 

 

 

 

> Message du 25/07/19 12:19
> De : "ja1nlx" <ayoshida0205@...>
> A : hamlogger@groups.io
> Copie à :
> Objet : Re: [hamlogger] CW Machine
>
>

> Albert

> I see like this when clicking minimized button in CW machine.

>

> Do you really see nothing ?

> and try to run CW machine after deleting CW.ini.
>

> 73
>


>
On 2019/07/25 18:09, Albert Crespo wrote:
>

>  Aki,

>  

> After minimizing the CW machine, I went into the Logger 32 and opened the CW machine as an administrator and it came back. It however, will not move and cannot minimize without it disappearing again.

> This suggestion is a big help as I do not need to reboot the program to get the machine back.

> For years I have used the CW machine and did not have this problem.

> If I open a browser  the CW machine appears. This is why I want to minimize the machine.

> I will sent a picture.Albert

>  

> Message du 25/07/19 10:22
> > De : "ja1nlx" <ayoshida0205@...>
> > A : hamlogger@groups.io
> > Copie à :
> > Objet : Re: [hamlogger] CW Machine
> >
> >

> > Set CW.exe to run as administrator if not.

> > 73
> >

On 2019/07/25 16:07, Albert Crespo wrote:
> >

> > Have the latest version of Logger 32 installed on two Windows 10 computers.

> > When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

> > I have closed the  program and restarted it, but  the same problem happens again.

> > Is this a bug now with the CW machine that the window cannot be minimized?

> > .

> >  

_,_
--
> > 73 de aki
> > JA1NLX
--
> 73 de aki
> JA1NLX

Re: CW Machine

Bob
 

Albert, you say you have Logger32 installed on two PCs running Win 10, but you didn't say if you see the same problem on both PCs. You say you can't minimize the CW Machine, can you close the CW Machine (by clicking on the X at the top right of the Window)?


The CW Machine is not a window of Logger32 it is a stand alone program. So 'find' in Logger32 will not be able to see the CW machine. The CW machine has not been modified since September 2017




You can run the CW Machine without Logger32 running. There is a file CW.EXE in the Logger32 directory, just run that. You will get a warning that Loger32 is not running, but the program will start and you can play and see if you can move/minimize the form. 73.




On July 25, 2019 at 3:07 AM Albert Crespo <f5vhj@...> wrote:

Have the latest version of Logger 32 installed on two Windows 10 computers.

When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

I have closed the  program and restarted it, but  the same problem happens again.

Is this a bug now with the CW machine that the window cannot be minimized?

.

 

_,_

Re: CW Machine

ja1nlx
 

Albert

I see like this when clicking minimized button in CW machine.

Do you really see nothing ?

and try to run CW machine after deleting CW.ini.

73


On 2019/07/25 18:09, Albert Crespo wrote:

 Aki,

 

After minimizing the CW machine, I went into the Logger 32 and opened the CW machine as an administrator and it came back. It however, will not move and cannot minimize without it disappearing again.

This suggestion is a big help as I do not need to reboot the program to get the machine back.

For years I have used the CW machine and did not have this problem.

If I open a browser  the CW machine appears. This is why I want to minimize the machine.

I will sent a picture.Albert

 

> Message du 25/07/19 10:22
> De : "ja1nlx" <ayoshida0205@...>
> A : hamlogger@groups.io
> Copie à :
> Objet : Re: [hamlogger] CW Machine
>
>

> Set CW.exe to run as administrator if not.

> 73
>

On 2019/07/25 16:07, Albert Crespo wrote:
>

> Have the latest version of Logger 32 installed on two Windows 10 computers.

> When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

> I have closed the  program and restarted it, but  the same problem happens again.

> Is this a bug now with the CW machine that the window cannot be minimized?

> .

>  

_,_
--
> 73 de aki
> JA1NLX
--
73 de aki
JA1NLX

Re: CW Machine

Albert Crespo
 

 Aki,

 

After minimizing the CW machine, I went into the Logger 32 and opened the CW machine as an administrator and it came back. It however, will not move and cannot minimize without it disappearing again.

This suggestion is a big help as I do not need to reboot the program to get the machine back.

For years I have used the CW machine and did not have this problem.

If I open a browser  the CW machine appears. This is why I want to minimize the machine.

I will sent a picture.Albert

 

> Message du 25/07/19 10:22
> De : "ja1nlx" <ayoshida0205@...>
> A : hamlogger@groups.io
> Copie à :
> Objet : Re: [hamlogger] CW Machine
>
>

> Set CW.exe to run as administrator if not.

> 73
>

On 2019/07/25 16:07, Albert Crespo wrote:
>

> Have the latest version of Logger 32 installed on two Windows 10 computers.

> When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

> I have closed the  program and restarted it, but  the same problem happens again.

> Is this a bug now with the CW machine that the window cannot be minimized?

> .

>  

_,_
--
> 73 de aki
> JA1NLX

Re: Country exception from ClubLog - Logger32 crushes

ja1nlx
 

Andy

When Logger32 crash ?

What message you see ?

73

On 2019/07/25 16:34, Andy None via Groups.Io wrote:
Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR
--
73 de aki
JA1NLX

Country exception from ClubLog - Logger32 crushes

Andy None
 

Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR

Re: Off topic question ...

jason williams
 

I do believe he still gets his nanny to do that, but she is 107 and cant do much...either that or some how the lizard has stretched his human suit in the wash again...

Re: CW Machine

ja1nlx
 

Set CW.exe to run as administrator if not.

73

On 2019/07/25 16:07, Albert Crespo wrote:

Have the latest version of Logger 32 installed on two Windows 10 computers.

When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

I have closed the  program and restarted it, but  the same problem happens again.

Is this a bug now with the CW machine that the window cannot be minimized?

.

 

_,_
--
73 de aki
JA1NLX

CW Machine

Albert Crespo
 

Have the latest version of Logger 32 installed on two Windows 10 computers.

When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

I have closed the  program and restarted it, but  the same problem happens again.

Is this a bug now with the CW machine that the window cannot be minimized?

.

 

_,_

Re: Off topic question ...

Bob
 

Tom, the BBC just posted the pictures. Boris looked very Trumpesque ... What's with this LGBTQ handshake thing the Queen does? (Yuk, creepy). SeventyThree(s).

On July 24, 2019 at 1:11 PM Tom Wylie <thomasgwylie@...> wrote:

I think he cuts his own hair with a pair of scissors whilst looking in a mirror


Tom
G#4FDM

On Wed, 24 Jul 2019, 16:41 Bob, < k4cy@...> wrote:

Does anyone know if Boris combed his hair before his audience with the Queen? SeventyThree(s).