Date   
Re: ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes

Bob <k4cy@...>
 

What version of Logger32 are you using? 73.

On July 25, 2019 at 7:23 AM Andy VA3PL <va3pl@...> wrote:

Replay from ClubLog goes so fast that last sentence I was able to read was "Deleting all prefixes" and after this Logger32 close.

Andy SP9KR

 

Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika ja1nlx <ayoshida0205@...>
Wysłane: czwartek, 25 lipca 2019 10:21
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

Andy

When Logger32 crash ?

What message you see ?

73

On 2019/07/25 16:34, Andy None via Groups.Io wrote:
Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR
--
73 de aki
JA1NLX


 


 

ODP: [hamlogger] Country exception from ClubLog - Logger32 crushes

Andy VA3PL
 

Replay from ClubLog goes so fast that last sentence I was able to read was "Deleting all prefixes" and after this Logger32 close.

Andy SP9KR


Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika ja1nlx <ayoshida0205@...>
Wysłane: czwartek, 25 lipca 2019 10:21
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: [hamlogger] Country exception from ClubLog - Logger32 crushes
 

Andy

When Logger32 crash ?

What message you see ?

73

On 2019/07/25 16:34, Andy None via Groups.Io wrote:
Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR
--
73 de aki
JA1NLX

Re: CW Machine

ja1nlx
 

Yes try that.

73

On 2019/07/25 20:18, Albert Crespo wrote:

Aki,

See attched- I see nothing.

Notice also on the tool bar, I cannot activate the CW machine from there.

Are you suggesting I delete my CW.ini file and then run the machine?

Albert

 

 

 

 

> Message du 25/07/19 12:19
> De : "ja1nlx" <ayoshida0205@...>
> A : hamlogger@groups.io
> Copie à :
> Objet : Re: [hamlogger] CW Machine
>
>

> Albert

> I see like this when clicking minimized button in CW machine.

>

> Do you really see nothing ?

> and try to run CW machine after deleting CW.ini.
>

> 73
>


>
On 2019/07/25 18:09, Albert Crespo wrote:
>

>  Aki,

>  

> After minimizing the CW machine, I went into the Logger 32 and opened the CW machine as an administrator and it came back. It however, will not move and cannot minimize without it disappearing again.

> This suggestion is a big help as I do not need to reboot the program to get the machine back.

> For years I have used the CW machine and did not have this problem.

> If I open a browser  the CW machine appears. This is why I want to minimize the machine.

> I will sent a picture.Albert

>  

> Message du 25/07/19 10:22
> > De : "ja1nlx" <ayoshida0205@...>
> > A : hamlogger@groups.io
> > Copie à :
> > Objet : Re: [hamlogger] CW Machine
> >
> >

> > Set CW.exe to run as administrator if not.

> > 73
> >

On 2019/07/25 16:07, Albert Crespo wrote:
> >

> > Have the latest version of Logger 32 installed on two Windows 10 computers.

> > When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

> > I have closed the  program and restarted it, but  the same problem happens again.

> > Is this a bug now with the CW machine that the window cannot be minimized?

> > .

> >  

_,_
--
> > 73 de aki
> > JA1NLX
--
> 73 de aki
> JA1NLX
--
73 de aki
JA1NLX

Re: CW Machine

Albert Crespo
 

Aki,

See attched- I see nothing.

Notice also on the tool bar, I cannot activate the CW machine from there.

Are you suggesting I delete my CW.ini file and then run the machine?

Albert

 

 

 

 

> Message du 25/07/19 12:19
> De : "ja1nlx" <ayoshida0205@...>
> A : hamlogger@groups.io
> Copie à :
> Objet : Re: [hamlogger] CW Machine
>
>

> Albert

> I see like this when clicking minimized button in CW machine.

>

> Do you really see nothing ?

> and try to run CW machine after deleting CW.ini.
>

> 73
>


>
On 2019/07/25 18:09, Albert Crespo wrote:
>

>  Aki,

>  

> After minimizing the CW machine, I went into the Logger 32 and opened the CW machine as an administrator and it came back. It however, will not move and cannot minimize without it disappearing again.

> This suggestion is a big help as I do not need to reboot the program to get the machine back.

> For years I have used the CW machine and did not have this problem.

> If I open a browser  the CW machine appears. This is why I want to minimize the machine.

> I will sent a picture.Albert

>  

> Message du 25/07/19 10:22
> > De : "ja1nlx" <ayoshida0205@...>
> > A : hamlogger@groups.io
> > Copie à :
> > Objet : Re: [hamlogger] CW Machine
> >
> >

> > Set CW.exe to run as administrator if not.

> > 73
> >

On 2019/07/25 16:07, Albert Crespo wrote:
> >

> > Have the latest version of Logger 32 installed on two Windows 10 computers.

> > When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

> > I have closed the  program and restarted it, but  the same problem happens again.

> > Is this a bug now with the CW machine that the window cannot be minimized?

> > .

> >  

_,_
--
> > 73 de aki
> > JA1NLX
--
> 73 de aki
> JA1NLX

Re: CW Machine

Bob <k4cy@...>
 

Albert, you say you have Logger32 installed on two PCs running Win 10, but you didn't say if you see the same problem on both PCs. You say you can't minimize the CW Machine, can you close the CW Machine (by clicking on the X at the top right of the Window)?


The CW Machine is not a window of Logger32 it is a stand alone program. So 'find' in Logger32 will not be able to see the CW machine. The CW machine has not been modified since September 2017




You can run the CW Machine without Logger32 running. There is a file CW.EXE in the Logger32 directory, just run that. You will get a warning that Loger32 is not running, but the program will start and you can play and see if you can move/minimize the form. 73.




On July 25, 2019 at 3:07 AM Albert Crespo <f5vhj@...> wrote:

Have the latest version of Logger 32 installed on two Windows 10 computers.

When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

I have closed the  program and restarted it, but  the same problem happens again.

Is this a bug now with the CW machine that the window cannot be minimized?

.

 

_,_

Re: CW Machine

ja1nlx
 

Albert

I see like this when clicking minimized button in CW machine.

Do you really see nothing ?

and try to run CW machine after deleting CW.ini.

73


On 2019/07/25 18:09, Albert Crespo wrote:

 Aki,

 

After minimizing the CW machine, I went into the Logger 32 and opened the CW machine as an administrator and it came back. It however, will not move and cannot minimize without it disappearing again.

This suggestion is a big help as I do not need to reboot the program to get the machine back.

For years I have used the CW machine and did not have this problem.

If I open a browser  the CW machine appears. This is why I want to minimize the machine.

I will sent a picture.Albert

 

> Message du 25/07/19 10:22
> De : "ja1nlx" <ayoshida0205@...>
> A : hamlogger@groups.io
> Copie à :
> Objet : Re: [hamlogger] CW Machine
>
>

> Set CW.exe to run as administrator if not.

> 73
>

On 2019/07/25 16:07, Albert Crespo wrote:
>

> Have the latest version of Logger 32 installed on two Windows 10 computers.

> When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

> I have closed the  program and restarted it, but  the same problem happens again.

> Is this a bug now with the CW machine that the window cannot be minimized?

> .

>  

_,_
--
> 73 de aki
> JA1NLX
--
73 de aki
JA1NLX

Re: CW Machine

Albert Crespo
 

 Aki,

 

After minimizing the CW machine, I went into the Logger 32 and opened the CW machine as an administrator and it came back. It however, will not move and cannot minimize without it disappearing again.

This suggestion is a big help as I do not need to reboot the program to get the machine back.

For years I have used the CW machine and did not have this problem.

If I open a browser  the CW machine appears. This is why I want to minimize the machine.

I will sent a picture.Albert

 

> Message du 25/07/19 10:22
> De : "ja1nlx" <ayoshida0205@...>
> A : hamlogger@groups.io
> Copie à :
> Objet : Re: [hamlogger] CW Machine
>
>

> Set CW.exe to run as administrator if not.

> 73
>

On 2019/07/25 16:07, Albert Crespo wrote:
>

> Have the latest version of Logger 32 installed on two Windows 10 computers.

> When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

> I have closed the  program and restarted it, but  the same problem happens again.

> Is this a bug now with the CW machine that the window cannot be minimized?

> .

>  

_,_
--
> 73 de aki
> JA1NLX

Re: Country exception from ClubLog - Logger32 crushes

ja1nlx
 

Andy

When Logger32 crash ?

What message you see ?

73

On 2019/07/25 16:34, Andy None via Groups.Io wrote:
Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR
--
73 de aki
JA1NLX

Country exception from ClubLog - Logger32 crushes

Andy None
 

Hi
When I do Country database exception from ClubLog the Logger32 crushes.
I think this is problem with my setup but I am unable to find out what cause it.
Any help greatly appreciated.

73 de Andy SP9KR

Re: Off topic question ...

jason williams
 

I do believe he still gets his nanny to do that, but she is 107 and cant do much...either that or some how the lizard has stretched his human suit in the wash again...

Re: CW Machine

ja1nlx
 

Set CW.exe to run as administrator if not.

73

On 2019/07/25 16:07, Albert Crespo wrote:

Have the latest version of Logger 32 installed on two Windows 10 computers.

When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

I have closed the  program and restarted it, but  the same problem happens again.

Is this a bug now with the CW machine that the window cannot be minimized?

.

 

_,_
--
73 de aki
JA1NLX

CW Machine

Albert Crespo
 

Have the latest version of Logger 32 installed on two Windows 10 computers.

When I open the program as an adminstrator , the CW machine appears but I cannot move it. If the CW machine is on top of another window, then I can move that window and just leave the CW machine alone. It functions . However, when I minimize it, it disappears and I cannot locate it. I use the find windows and it is not evident.

I have closed the  program and restarted it, but  the same problem happens again.

Is this a bug now with the CW machine that the window cannot be minimized?

.

 

_,_

Re: Off topic question ...

Bob <k4cy@...>
 

Tom, the BBC just posted the pictures. Boris looked very Trumpesque ... What's with this LGBTQ handshake thing the Queen does? (Yuk, creepy). SeventyThree(s).

On July 24, 2019 at 1:11 PM Tom Wylie <thomasgwylie@...> wrote:

I think he cuts his own hair with a pair of scissors whilst looking in a mirror


Tom
G#4FDM

On Wed, 24 Jul 2019, 16:41 Bob, < k4cy@...> wrote:

Does anyone know if Boris combed his hair before his audience with the Queen? SeventyThree(s).

 

 

Re: Off topic question ...

Tom Wylie
 

I think he cuts his own hair with a pair of scissors whilst looking in a mirror


Tom
G#4FDM

On Wed, 24 Jul 2019, 16:41 Bob, <k4cy@...> wrote:

Does anyone know if Boris combed his hair before his audience with the Queen? SeventyThree(s).

Re: Off topic question ...

Barry GM4GIF
 

Dunno, but I think she may have said “OK Boris, go kick some ass” !!!

73 de Barry/gm4gif


--
Air 2

Re: Off topic question ...

John Pink
 

He borrowed Trumps comb

 

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: 24 July 2019 16:42
To: hamlogger@groups.io
Subject: [hamlogger] Off topic question ...

 

Does anyone know if Boris combed his hair before his audience with the Queen? SeventyThree(s).

Re: Off topic question ...

NICK K. PLUMIDAKIS
 

I do not think so.

73

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: Wednesday, 24 July, 2019 18:42
To: hamlogger@groups.io
Subject: [hamlogger] Off topic question ...

 

Does anyone know if Boris combed his hair before his audience with the Queen? SeventyThree(s).

Off topic question ...

Bob <k4cy@...>
 

Does anyone know if Boris combed his hair before his audience with the Queen? SeventyThree(s).

Re: email/SMS alert with call/band/mode list

Bob <k4cy@...>
 

OK Pete, let's look at the DX Spot eMail/SMS alert options instead. I've provided every imaginable option/combination/alert mechanism I could think of. How 'bout this - Right click the DX Spots Window. Click SETUP | SETUP DX SPOT ALERTS (EMAIL/SMS/SCRATCHPAD). Check the top four checkboxes. UNcheck the next three. Check ALERT BY EMAIL. Check DO NOT REPEAT THESE ALERTS. And whatever you like for the last option. This should eMail you only for need country/band/mode. SeventyThree(s).


PS. You'll still get alerts you don't want/need alerts (like a 2M DX Spot from an Italian working his neighbor), for those you need to filter bands/modes from the DX Spot window (a different subject).

On July 24, 2019 at 9:35 AM n5kd <n5kd@...> wrote:

Hi Bob,

 

No… I mean from the DX spots window – Right Click – Setup – Audio/Prefix/Comments alert – Then the top right hand corner - edit call/band/mode list

 

That list is always full here – but I’m overloaded by emails if I use the other less selective options.

 

I tested the UDP email. That DOES work great, but not what I was looking for.

 

Cheers.   73’ Pete, N5KD.

 

 

Sent from Mail for Windows 10

 

From: Bob
Sent: Wednesday, July 24, 2019 11:48 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] email/SMS alert with call/band/mode list

 

Pete, do you mean you eMail/SMS messages for need country/band/mode for decoded callsigns on the UDP BandMap? On the UDP BandMap click CONFIG and check the ENABLE SMS/EMAIL MESSAGES. SeventyThree(s).

On July 24, 2019 at 7:39 AM n5kd <n5kd@...> wrote:

One of the real nice features of Logger32 (for me) is audio alerts on the call/band/mode list. That way my shack speakers can tell me to get in the shack.

 

At long last – since the last email trail – I have got the email alert working, but can’t find how to get emails for the call/band/mode list. Am I missing something?

 

Thanks.

 

73’ Pete, N5KD.

 

 

 

Sent from Mail for Windows 10

 


 


 

 

 


 


 

Re: email/SMS alert with call/band/mode list

n5kd
 

Hi Bob,

 

No… I mean from the DX spots window – Right Click – Setup – Audio/Prefix/Comments alert – Then the top right hand corner - edit call/band/mode list

 

That list is always full here – but I’m overloaded by emails if I use the other less selective options.

 

I tested the UDP email. That DOES work great, but not what I was looking for.

 

Cheers.   73’ Pete, N5KD.

 

 

Sent from Mail for Windows 10

 

From: Bob
Sent: Wednesday, July 24, 2019 11:48 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] email/SMS alert with call/band/mode list

 

Pete, do you mean you eMail/SMS messages for need country/band/mode for decoded callsigns on the UDP BandMap? On the UDP BandMap click CONFIG and check the ENABLE SMS/EMAIL MESSAGES. SeventyThree(s).

On July 24, 2019 at 7:39 AM n5kd <n5kd@...> wrote:

One of the real nice features of Logger32 (for me) is audio alerts on the call/band/mode list. That way my shack speakers can tell me to get in the shack.

 

At long last – since the last email trail – I have got the email alert working, but can’t find how to get emails for the call/band/mode list. Am I missing something?

 

Thanks.

 

73’ Pete, N5KD.

 

 

 

Sent from Mail for Windows 10