Date   
Re: Off topic question ...

NICK K. PLUMIDAKIS
 

I do not think so.

73

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: Wednesday, 24 July, 2019 18:42
To: hamlogger@groups.io
Subject: [hamlogger] Off topic question ...

 

Does anyone know if Boris combed his hair before his audience with the Queen? SeventyThree(s).

Off topic question ...

Bob
 

Does anyone know if Boris combed his hair before his audience with the Queen? SeventyThree(s).

Re: email/SMS alert with call/band/mode list

Bob
 

OK Pete, let's look at the DX Spot eMail/SMS alert options instead. I've provided every imaginable option/combination/alert mechanism I could think of. How 'bout this - Right click the DX Spots Window. Click SETUP | SETUP DX SPOT ALERTS (EMAIL/SMS/SCRATCHPAD). Check the top four checkboxes. UNcheck the next three. Check ALERT BY EMAIL. Check DO NOT REPEAT THESE ALERTS. And whatever you like for the last option. This should eMail you only for need country/band/mode. SeventyThree(s).


PS. You'll still get alerts you don't want/need alerts (like a 2M DX Spot from an Italian working his neighbor), for those you need to filter bands/modes from the DX Spot window (a different subject).

On July 24, 2019 at 9:35 AM n5kd <n5kd@...> wrote:

Hi Bob,

 

No… I mean from the DX spots window – Right Click – Setup – Audio/Prefix/Comments alert – Then the top right hand corner - edit call/band/mode list

 

That list is always full here – but I’m overloaded by emails if I use the other less selective options.

 

I tested the UDP email. That DOES work great, but not what I was looking for.

 

Cheers.   73’ Pete, N5KD.

 

 

Sent from Mail for Windows 10

 

From: Bob
Sent: Wednesday, July 24, 2019 11:48 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] email/SMS alert with call/band/mode list

 

Pete, do you mean you eMail/SMS messages for need country/band/mode for decoded callsigns on the UDP BandMap? On the UDP BandMap click CONFIG and check the ENABLE SMS/EMAIL MESSAGES. SeventyThree(s).

On July 24, 2019 at 7:39 AM n5kd <n5kd@...> wrote:

One of the real nice features of Logger32 (for me) is audio alerts on the call/band/mode list. That way my shack speakers can tell me to get in the shack.

 

At long last – since the last email trail – I have got the email alert working, but can’t find how to get emails for the call/band/mode list. Am I missing something?

 

Thanks.

 

73’ Pete, N5KD.

 

 

 

Sent from Mail for Windows 10

 


 


 

 

 


 


 

Re: email/SMS alert with call/band/mode list

n5kd
 

Hi Bob,

 

No… I mean from the DX spots window – Right Click – Setup – Audio/Prefix/Comments alert – Then the top right hand corner - edit call/band/mode list

 

That list is always full here – but I’m overloaded by emails if I use the other less selective options.

 

I tested the UDP email. That DOES work great, but not what I was looking for.

 

Cheers.   73’ Pete, N5KD.

 

 

Sent from Mail for Windows 10

 

From: Bob
Sent: Wednesday, July 24, 2019 11:48 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] email/SMS alert with call/band/mode list

 

Pete, do you mean you eMail/SMS messages for need country/band/mode for decoded callsigns on the UDP BandMap? On the UDP BandMap click CONFIG and check the ENABLE SMS/EMAIL MESSAGES. SeventyThree(s).

On July 24, 2019 at 7:39 AM n5kd <n5kd@...> wrote:

One of the real nice features of Logger32 (for me) is audio alerts on the call/band/mode list. That way my shack speakers can tell me to get in the shack.

 

At long last – since the last email trail – I have got the email alert working, but can’t find how to get emails for the call/band/mode list. Am I missing something?

 

Thanks.

 

73’ Pete, N5KD.

 

 

 

Sent from Mail for Windows 10

 


 


 

 

Re: email/SMS alert with call/band/mode list

Bob
 

Pete, do you mean you eMail/SMS messages for need country/band/mode for decoded callsigns on the UDP BandMap? On the UDP BandMap click CONFIG and check the ENABLE SMS/EMAIL MESSAGES. SeventyThree(s).

On July 24, 2019 at 7:39 AM n5kd <n5kd@...> wrote:

One of the real nice features of Logger32 (for me) is audio alerts on the call/band/mode list. That way my shack speakers can tell me to get in the shack.

 

At long last – since the last email trail – I have got the email alert working, but can’t find how to get emails for the call/band/mode list. Am I missing something?

 

Thanks.

 

73’ Pete, N5KD.

 

 

 

Sent from Mail for Windows 10

 


 


 

email/SMS alert with call/band/mode list

n5kd
 

One of the real nice features of Logger32 (for me) is audio alerts on the call/band/mode list. That way my shack speakers can tell me to get in the shack.

 

At long last – since the last email trail – I have got the email alert working, but can’t find how to get emails for the call/band/mode list. Am I missing something?

 

Thanks.

 

73’ Pete, N5KD.

 

 

 

Sent from Mail for Windows 10

 

Stoppage of dx spots

DamianM0BKV
 

This does happen if you leave script in the CW sent window. Best to 'Abort'
after completing a CW QSO I find. Damian M0BKV

Re: Unusual Stoppage of DX spots

Bob
 

Gary, the UDP BandMap buffer is something like 400 rows. Every time a new callsign is decoded the buffer is checked. If the callsign is not in the buffer and the buffer is not full the callsign is added. I the buffer is full, the oldest decoded callsign is deleted an the new one added. The CLEAR menu on the UDP BandMap window clears the entire buffer. So much for the buffer, now to the actual UDP BandMap. The number of rows is dynamic, depending on the height of the windows form. As every WSJT/JTDX decode cycle completes, the newest decoded signals populate the visible rows. You can see the effect by changing the height of the UDP BandMap watching which decoded callsigns are visible.


I have no idea what you saw, or thought you saw, but I doubt it was a buffer overflow. Logger32 would scream and shout with "The sky is falling ..." error messages, then freeze. I am not doubting or questioning this error report. Clearly something is wrong, but without some pointers, I have no idea where to start looking. For now, all I can suggest is that you click the VIEW menu and make sure the ENABLE ERROR TRAPPING option is checked. This option turns on an additional level of error testing that may reveal what is wrong. SeventyThree(s).

On July 22, 2019 at 5:03 PM Gary <wa3nwl@...> wrote:

I recently experienced an unusual stoppage of all incoming spots being posted to the spots window and to the UDP Band map which was full.. All other functions appeared  normal..

To explain how this happened: While leaving L32 on and running with the UDP bandmap open with JTDX and then going into another room while it was running for several hours I found after returning that all dx spots and incoming activity had stopped.

Seeing that the UDP band map was completely filled and then  hitting the clear function activity immediately started with several hours worth of DX spots rolling in scrolling away for several minutes.

Is this a buffer condition having reached a completely full condition for the UDP bandmap?

If so can the UDP band map be made to flush after either reaching a near full size or on a time  basis?

I dont consider this to be a major issue but nice to know FYI thing as to whether the UDP Bandmap should be closed by the operator if they are going to leave things running when not at the computer locally.

Perhaps  I have missed a setting  to clear the UDP Bandmap periodically..  

If this is not a condition of L32 or the UDP band map, then it must be a memory problem on my computer and I will have to remember that in the future to close the UDP band map, but I have never experienced this action before.

This BTW occurred on the latest version just a few days ago as I always allow L32 to update.

Gary - W3GLD

Unusual Stoppage of DX spots

Gary
 

I recently experienced an unusual stoppage of all incoming spots being posted to the spots window and to the UDP Band map which was full.. All other functions appeared  normal..

To explain how this happened: While leaving L32 on and running with the UDP bandmap open with JTDX and then going into another room while it was running for several hours I found after returning that all dx spots and incoming activity had stopped.

Seeing that the UDP band map was completely filled and then  hitting the clear function activity immediately started with several hours worth of DX spots rolling in scrolling away for several minutes.

Is this a buffer condition having reached a completely full condition for the UDP bandmap?

If so can the UDP band map be made to flush after either reaching a near full size or on a time  basis?

I dont consider this to be a major issue but nice to know FYI thing as to whether the UDP Bandmap should be closed by the operator if they are going to leave things running when not at the computer locally.

Perhaps  I have missed a setting  to clear the UDP Bandmap periodically.. 

If this is not a condition of L32 or the UDP band map, then it must be a memory problem on my computer and I will have to remember that in the future to close the UDP band map, but I have never experienced this action before.

This BTW occurred on the latest version just a few days ago as I always allow L32 to update.

Gary - W3GLD

Re: E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Jim Altman
 

That setting is not available if you use two step authentication, however, you can get there by creating an app password. That also works.

Thanks, got it working. 73



Jim Altman
jaltman636@...

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Monday, July 22, 2019 2:59 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Jim, if you're trying to setup GMail, then see this from the Help file:

The default setting is for Gmail. The Gmail security is set to allow less secure apps to access Gmail. Go to https://www.google.com/settings/security/lesssecureapps and turn it ON.

SeventyThree(s).


On July 22, 2019 at 1:23 PM Jim Altman <jaltman636@...> wrote:


Thanks Bob, got it. I seem to be having some trouble with my tls only servers, but I will play and get something figured out.

73


Jim Altman
jaltman636@...

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Monday, July 22, 2019 12:42 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Right click on the DX Spot Window. Click SETUP | SETUP DX SPOT ALERTS (SMS/EMAIL/SCRATCHPAD). If you are going to use this for UDP Decode station alterts, then UNcheck all checkboxes. Optionally, check this one - CHECK THIS IF YOUR EMAIL ALERTS ARE BEING BLOCKED AS SPAM. SeventyThree(s).

On July 22, 2019 at 11:26 AM Jim Altman <jaltman636@...> wrote:


Sounds neat. I see the menu item in UDP but where do I tell it what my email address is?

Thanks and 73



Jim Altman
jaltman636@...

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Monday, July 22, 2019 10:27 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Enjoy!

On July 22, 2019 at 10:08 AM "Chris.9A2X" <chris.9a2x@...> wrote:


It works. Already got new one this weekend thanks to this new feature. I recommend to everyone who chase to turn on 'Enable SMS/eMail messages for new Country/Band/Mode' option in WSJT-X window. Tnx, 73.












Re: E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Bob
 

Jim, if you're trying to setup GMail, then see this from the Help file:

The default setting is for Gmail. The Gmail security is set to allow less secure apps to access Gmail. Go to https://www.google.com/settings/security/lesssecureapps and turn it ON.

SeventyThree(s).

On July 22, 2019 at 1:23 PM Jim Altman <jaltman636@...> wrote:


Thanks Bob, got it. I seem to be having some trouble with my tls only servers, but I will play and get something figured out.

73


Jim Altman
jaltman636@...

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Monday, July 22, 2019 12:42 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Right click on the DX Spot Window. Click SETUP | SETUP DX SPOT ALERTS (SMS/EMAIL/SCRATCHPAD). If you are going to use this for UDP Decode station alterts, then UNcheck all checkboxes. Optionally, check this one - CHECK THIS IF YOUR EMAIL ALERTS ARE BEING BLOCKED AS SPAM. SeventyThree(s).

On July 22, 2019 at 11:26 AM Jim Altman <jaltman636@...> wrote:


Sounds neat. I see the menu item in UDP but where do I tell it what my email address is?

Thanks and 73



Jim Altman
jaltman636@...

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Monday, July 22, 2019 10:27 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Enjoy!

On July 22, 2019 at 10:08 AM "Chris.9A2X" <chris.9a2x@...> wrote:


It works. Already got new one this weekend thanks to this new feature. I recommend to everyone who chase to turn on 'Enable SMS/eMail messages for new Country/Band/Mode' option in WSJT-X window. Tnx, 73.












Re: E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Jim Altman
 

Thanks Bob, got it. I seem to be having some trouble with my tls only servers, but I will play and get something figured out.

73


Jim Altman
jaltman636@...

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Monday, July 22, 2019 12:42 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Right click on the DX Spot Window. Click SETUP | SETUP DX SPOT ALERTS (SMS/EMAIL/SCRATCHPAD). If you are going to use this for UDP Decode station alterts, then UNcheck all checkboxes. Optionally, check this one - CHECK THIS IF YOUR EMAIL ALERTS ARE BEING BLOCKED AS SPAM. SeventyThree(s).

On July 22, 2019 at 11:26 AM Jim Altman <jaltman636@...> wrote:


Sounds neat. I see the menu item in UDP but where do I tell it what my email address is?

Thanks and 73



Jim Altman
jaltman636@...

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Monday, July 22, 2019 10:27 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Enjoy!

On July 22, 2019 at 10:08 AM "Chris.9A2X" <chris.9a2x@...> wrote:


It works. Already got new one this weekend thanks to this new feature. I recommend to everyone who chase to turn on 'Enable SMS/eMail messages for new Country/Band/Mode' option in WSJT-X window. Tnx, 73.







Re: Still have update installation issues

Ilya Zozin,4Z1UF
 

Great tip, thanks a lot!

But don’t think you’ve got rid of me that simple…😉

 

73,

Ilya, 4Z1UF

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Monday, 22 July 2019 15:55
To: hamlogger@groups.io
Subject: Re: [hamlogger] Still have update installation issues

 

It's very simple to set the Logger32 desktop shortcut so that the program automagically runs as administrator every time.  Right click on the desktop icon and select the Properties menu. Select the Compatibility tab. Check the Run this program as an administrator option. Click Apply. Click OK. SeventyThree(s).

On July 22, 2019 at 8:35 AM Ed Tobias <edtobias@...> wrote:

Ilya,

 

This is not unique to you. It happens to me all the time running Windows 10. 

 

Each time I boot up from a full, power off shut down, I must open L32 as an administrator in order for the automatic updates to load. After that, I can close and re-open L32 as much as I want without having to do it as an administrator. It’s only after I power down and power back up that I have to re-open as admin. 

 

73,

 

Ed, KR3E 

 


On Jul 22, 2019, at 4:46 AM, Ilya Zozin,4Z1UF < 4z1uf@...> wrote:

Hello John,

It worked. Could not imagine that  downloading is also related to Admin rights.

Thanks a lot!

 

73,

Ilya, 4Z1UF

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of John Cranfield
Sent: Sunday, 21 July 2019 21:18
To: hamlogger@groups.io
Subject: Re: [hamlogger] Still have update installation issues

 

Good evening Ilya

 

Try opening Logger32 as Administrator and then download the Logger32 update. This should work for you.

 

73 de John ZD7JC

St Helena Island

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Ilya Zozin,4Z1UF
Sent: 21 July 2019 17:54
To: hamlogger@groups.io
Subject: [hamlogger] Still have update installation issues

 

Since a previous trial to update  (when I removed TQSL from Utilities)  this is what I’m getting  every time while attempting to update:

<image001.png>

 

What I’m doing wrong this time?

73,

Ilya, 4Z1UF

 

 

 


 


 

Re: E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Bob
 

Right click on the DX Spot Window. Click SETUP | SETUP DX SPOT ALERTS (SMS/EMAIL/SCRATCHPAD). If you are going to use this for UDP Decode station alterts, then UNcheck all checkboxes. Optionally, check this one - CHECK THIS IF YOUR EMAIL ALERTS ARE BEING BLOCKED AS SPAM. SeventyThree(s).

On July 22, 2019 at 11:26 AM Jim Altman <jaltman636@...> wrote:


Sounds neat. I see the menu item in UDP but where do I tell it what my email address is?

Thanks and 73



Jim Altman
jaltman636@...

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Monday, July 22, 2019 10:27 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Enjoy!

On July 22, 2019 at 10:08 AM "Chris.9A2X" <chris.9a2x@...> wrote:


It works. Already got new one this weekend thanks to this new feature. I recommend to everyone who chase to turn on 'Enable SMS/eMail messages for new Country/Band/Mode' option in WSJT-X window. Tnx, 73.







Re: E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Jim Altman
 

Sounds neat. I see the menu item in UDP but where do I tell it what my email address is?

Thanks and 73



Jim Altman
jaltman636@...

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Monday, July 22, 2019 10:27 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Enjoy!

On July 22, 2019 at 10:08 AM "Chris.9A2X" <chris.9a2x@...> wrote:


It works. Already got new one this weekend thanks to this new feature. I recommend to everyone who chase to turn on 'Enable SMS/eMail messages for new Country/Band/Mode' option in WSJT-X window. Tnx, 73.


Re: E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Bob
 

Enjoy!

On July 22, 2019 at 10:08 AM "Chris.9A2X" <chris.9a2x@...> wrote:


It works. Already got new one this weekend thanks to this new feature. I recommend to everyone who chase to turn on 'Enable SMS/eMail messages for new Country/Band/Mode' option in WSJT-X window. Tnx, 73.


Re: E-mail alerts based on localy decoded (WSJT-X) call that is new dxcc per band/mode

Chris.9A2X
 

It works. Already got new one this weekend thanks to this new feature. I recommend to everyone who chase to turn on 'Enable SMS/eMail messages for new Country/Band/Mode' option in WSJT-X window. Tnx, 73.

Re: Still have update installation issues

Bob
 

Ed, you and me both. That's what it's all about - Keeping the little gray cells alive. SeventyThree(s).

On July 22, 2019 at 9:11 AM Ed Tobias <edtobias@...> wrote:

Thanks, Bob. I learn something new everyday.

 

 

From: Bob
Sent: Monday, July 22, 2019 8:55 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Still have update installation issues

 

It's very simple to set the Logger32 desktop shortcut so that the program automagically runs as administrator every time.  Right click on the desktop icon and select the Properties menu. Select the Compatibility tab. Check the Run this program as an administrator option. Click Apply. Click OK. SeventyThree(s).

On July 22, 2019 at 8:35 AM Ed Tobias <edtobias@...> wrote:

Ilya,

 

This is not unique to you. It happens to me all the time running Windows 10. 

 

Each time I boot up from a full, power off shut down, I must open L32 as an administrator in order for the automatic updates to load. After that, I can close and re-open L32 as much as I want without having to do it as an administrator. It’s only after I power down and power back up that I have to re-open as admin. 

 

73,

 

Ed, KR3E 

 


On Jul 22, 2019, at 4:46 AM, Ilya Zozin,4Z1UF < 4z1uf@...> wrote:

Hello John,

It worked. Could not imagine that  downloading is also related to Admin rights.

Thanks a lot!

 

73,

Ilya, 4Z1UF

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of John Cranfield
Sent: Sunday, 21 July 2019 21:18
To: hamlogger@groups.io
Subject: Re: [hamlogger] Still have update installation issues

 

Good evening Ilya

 

Try opening Logger32 as Administrator and then download the Logger32 update. This should work for you.

 

73 de John ZD7JC

St Helena Island

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Ilya Zozin,4Z1UF
Sent: 21 July 2019 17:54
To: hamlogger@groups.io
Subject: [hamlogger] Still have update installation issues

 

Since a previous trial to update  (when I removed TQSL from Utilities)  this is what I’m getting  every time while attempting to update:

<image001.png>

 

What I’m doing wrong this time?

73,

Ilya, 4Z1UF

 

 

 


 


 

 

 


 


 

Re: Still have update installation issues

Ed Tobias
 

Thanks, Bob. I learn something new everyday.

 

 

From: Bob
Sent: Monday, July 22, 2019 8:55 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Still have update installation issues

 

It's very simple to set the Logger32 desktop shortcut so that the program automagically runs as administrator every time.  Right click on the desktop icon and select the Properties menu. Select the Compatibility tab. Check the Run this program as an administrator option. Click Apply. Click OK. SeventyThree(s).

On July 22, 2019 at 8:35 AM Ed Tobias <edtobias@...> wrote:

Ilya,

 

This is not unique to you. It happens to me all the time running Windows 10. 

 

Each time I boot up from a full, power off shut down, I must open L32 as an administrator in order for the automatic updates to load. After that, I can close and re-open L32 as much as I want without having to do it as an administrator. It’s only after I power down and power back up that I have to re-open as admin. 

 

73,

 

Ed, KR3E 

 


On Jul 22, 2019, at 4:46 AM, Ilya Zozin,4Z1UF < 4z1uf@...> wrote:

Hello John,

It worked. Could not imagine that  downloading is also related to Admin rights.

Thanks a lot!

 

73,

Ilya, 4Z1UF

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of John Cranfield
Sent: Sunday, 21 July 2019 21:18
To: hamlogger@groups.io
Subject: Re: [hamlogger] Still have update installation issues

 

Good evening Ilya

 

Try opening Logger32 as Administrator and then download the Logger32 update. This should work for you.

 

73 de John ZD7JC

St Helena Island

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Ilya Zozin,4Z1UF
Sent: 21 July 2019 17:54
To: hamlogger@groups.io
Subject: [hamlogger] Still have update installation issues

 

Since a previous trial to update  (when I removed TQSL from Utilities)  this is what I’m getting  every time while attempting to update:

<image001.png>

 

What I’m doing wrong this time?

73,

Ilya, 4Z1UF

 

 

 


 


 

 

Re: Still have update installation issues

Bob
 

It's very simple to set the Logger32 desktop shortcut so that the program automagically runs as administrator every time.  Right click on the desktop icon and select the Properties menu. Select the Compatibility tab. Check the Run this program as an administrator option. Click Apply. Click OK. SeventyThree(s).

On July 22, 2019 at 8:35 AM Ed Tobias <edtobias@...> wrote:

Ilya,

This is not unique to you. It happens to me all the time running Windows 10. 

Each time I boot up from a full, power off shut down, I must open L32 as an administrator in order for the automatic updates to load. After that, I can close and re-open L32 as much as I want without having to do it as an administrator. It’s only after I power down and power back up that I have to re-open as admin. 

73,

Ed, KR3E 

 

On Jul 22, 2019, at 4:46 AM, Ilya Zozin,4Z1UF < 4z1uf@...> wrote:

Hello John,

It worked. Could not imagine that  downloading is also related to Admin rights.

Thanks a lot!

 

73,

Ilya, 4Z1UF

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of John Cranfield
Sent: Sunday, 21 July 2019 21:18
To: hamlogger@groups.io
Subject: Re: [hamlogger] Still have update installation issues

 

Good evening Ilya

 

Try opening Logger32 as Administrator and then download the Logger32 update. This should work for you.

 

73 de John ZD7JC

St Helena Island

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Ilya Zozin,4Z1UF
Sent: 21 July 2019 17:54
To: hamlogger@groups.io
Subject: [hamlogger] Still have update installation issues

 

Since a previous trial to update  (when I removed TQSL from Utilities)  this is what I’m getting  every time while attempting to update:

<image001.png>

 

What I’m doing wrong this time?

73,

Ilya, 4Z1UF