Date   

Re: Discrepancies Between LOTW and Logger32 DXCC counts

ja1nlx
 

Pete

What option you tried to synchronize logbook with LoTW ?

Synchronize LoTW (from an ADIF file) ?  or something else ?

73


On 2018/10/24 22:34, Pete Smith wrote:

I am somewhat bewildered - I just finished syncing my Logger32 logbook with LOTW, but I have discrepancies as to the number of countries credited for DXCC.  LOTW says that I have 322 current and confirmed, while Logger32 says I have 309.  I have just finished a half hour searching the Help file for means of identifying the differences, without success.  Can someone just point me in the right direction?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

--

73 de aki ja1nlx


Re: How to remove...

Gary Hinson
 

Another approach is to ‘consolidate’ the statistics for all the digimodes into one column, using the menu that appears when you right-click the worked-confirmed window:

 

 

Likewise with the phone modes (e.g. AM, DSB and SSB QSOs all count as phone).

 

A disadvantage of deleting modes from the ‘Bands and modes’ is that you will no longer be able to log QSOs on those modes if your interests change (e.g. if a rare DXpedition ONLY uses some obscure digimode?).  If you don’t care, go ahead.  Make my day.

 

73

Gary   ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Vilhjalmur Sigurjonsson
Sent: 25 October 2018 06:24
To: hamlogger@groups.io
Subject: Re: [hamlogger] How to remove...

 

That is correct and is the proper way to do it :)

73 Villi
TF3VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John Munton - G7SSE via Groups.Io
Sent: miðvikudagur, 24. október 2018 15:28
To: hamlogger@groups.io
Subject: Re: [hamlogger] How to remove...

 

I believe changing Y to N in the Stats column will also remove them from the Worked confirmed window.

 

John

G7SSE

 

 

 

Sent from my Samsung Galaxy smartphone.

 

-------- Original message --------

From: Mike Doe <ch25@...>

Date: 24/10/2018 14:24 (GMT+00:00)

Subject: Re: [hamlogger] How to remove...

 

On Wed, Oct 24, 2018 at 02:57 PM, Gerald Boutin wrote:


Deleting them from "Tools > Setup Bands and Modes" will get rid of them

Worked, thanks.
Mike


Re: How to remove...

Vilhjalmur Sigurjonsson
 

It is in Tools | Setup Bands and Modes  and there it is column no. 8

If you want to remove e.g. FT8 you have to do it for every band it has been assigned to, one Y left will keep the column, hi.

73 es gl

Villi
TF3VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Alex Malyava - K2BB
Sent: miðvikudagur, 24. október 2018 18:48
To: hamlogger@groups.io
Subject: Re: [hamlogger] How to remove...

 

Where exactly is this "Y to N in the Stats column" ?

 

I also want to get rid of PSK and, possibly, add some FT8....

 

Thanks,

Alex K2BB

 

 

 

On Wed, Oct 24, 2018 at 1:23 PM Vilhjalmur Sigurjonsson <vilhj@...> wrote:

That is correct and is the proper way to do it :)

73 Villi
TF3VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John Munton - G7SSE via Groups.Io
Sent: miðvikudagur, 24. október 2018 15:28
To: hamlogger@groups.io
Subject: Re: [hamlogger] How to remove...

 

I believe changing Y to N in the Stats column will also remove them from the Worked confirmed window.

 

John

G7SSE

 

 

 

Sent from my Samsung Galaxy smartphone.

 

-------- Original message --------

From: Mike Doe <ch25@...>

Date: 24/10/2018 14:24 (GMT+00:00)

Subject: Re: [hamlogger] How to remove...

 

On Wed, Oct 24, 2018 at 02:57 PM, Gerald Boutin wrote:


Deleting them from "Tools > Setup Bands and Modes" will get rid of them

Worked, thanks.
Mike


Re: How to remove...

Alex Malyava - K2BB
 

Where exactly is this "Y to N in the Stats column" ?

I also want to get rid of PSK and, possibly, add some FT8....

Thanks,
Alex K2BB



On Wed, Oct 24, 2018 at 1:23 PM Vilhjalmur Sigurjonsson <vilhj@...> wrote:

That is correct and is the proper way to do it :)

73 Villi
TF3VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John Munton - G7SSE via Groups.Io
Sent: miðvikudagur, 24. október 2018 15:28
To: hamlogger@groups.io
Subject: Re: [hamlogger] How to remove...

 

I believe changing Y to N in the Stats column will also remove them from the Worked confirmed window.

 

John

G7SSE

 

 

 

Sent from my Samsung Galaxy smartphone.

 

-------- Original message --------

From: Mike Doe <ch25@...>

Date: 24/10/2018 14:24 (GMT+00:00)

Subject: Re: [hamlogger] How to remove...

 

On Wed, Oct 24, 2018 at 02:57 PM, Gerald Boutin wrote:


Deleting them from "Tools > Setup Bands and Modes" will get rid of them

Worked, thanks.
Mike


Re: How to remove...

Vilhjalmur Sigurjonsson
 

That is correct and is the proper way to do it :)

73 Villi
TF3VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John Munton - G7SSE via Groups.Io
Sent: miðvikudagur, 24. október 2018 15:28
To: hamlogger@groups.io
Subject: Re: [hamlogger] How to remove...

 

I believe changing Y to N in the Stats column will also remove them from the Worked confirmed window.

 

John

G7SSE

 

 

 

Sent from my Samsung Galaxy smartphone.

 

-------- Original message --------

From: Mike Doe <ch25@...>

Date: 24/10/2018 14:24 (GMT+00:00)

Subject: Re: [hamlogger] How to remove...

 

On Wed, Oct 24, 2018 at 02:57 PM, Gerald Boutin wrote:


Deleting them from "Tools > Setup Bands and Modes" will get rid of them

Worked, thanks.
Mike


Re: How to remove...

John Munton - G7SSE <JOHNG7SSE@...>
 

I believe changing Y to N in the Stats column will also remove them from the Worked confirmed window.

John
G7SSE



Sent from my Samsung Galaxy smartphone.

-------- Original message --------
From: Mike Doe <ch25@...>
Date: 24/10/2018 14:24 (GMT+00:00)
To: hamlogger@groups.io
Subject: Re: [hamlogger] How to remove...

On Wed, Oct 24, 2018 at 02:57 PM, Gerald Boutin wrote:

Deleting them from "Tools > Setup Bands and Modes" will get rid of them
Worked, thanks.
Mike


Backup - Verify

John Pink
 

Running W10 and Logger 3.50.367

 

My Logger is set to backup on exit, and occasionally, – that is when I get around to it,  I ‘Zip’ the databases and Logbook– and of course I include the User files.  Today was one of those days that I remembered to do the housekeeping!

 

The backup went well, but when I came to ‘verify’  I got an error message - #503.  I checked that the save location was correct – it was, and to my surprise, the saved files were there in the folder, and apparently fully readable.

 

After, some investigation I changed the save location to another disk – and everything was ok.  However, I was keen to understand the original problem.  It appears that there were many backups in the folder - too many – more than 10, and at that point ‘verify’ results in the error message.

 

I deleted some old backups, and ‘verify’  work correctly again, but when I backed up several time  - enough that there were more than 10 copies in the folder, it fell over.

 

The same occurs with the ‘Zip user Files’ utility.   It is the same on my laptop copy of L32.

 

Small housekeeping issue, that I am sure will be easily fixed – please.

 

John G8MM

 

 


Discrepancies Between LOTW and Logger32 DXCC counts

Pete Smith <n4zr@...>
 

I am somewhat bewildered - I just finished syncing my Logger32 logbook with LOTW, but I have discrepancies as to the number of countries credited for DXCC.  LOTW says that I have 322 current and confirmed, while Logger32 says I have 309.  I have just finished a half hour searching the Help file for means of identifying the differences, without success.  Can someone just point me in the right direction?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.


Re: How to remove...

Mike
 

On Wed, Oct 24, 2018 at 02:57 PM, Gerald Boutin wrote:

Deleting them from "Tools > Setup Bands and Modes" will get rid of them
Worked, thanks.
Mike


Re: How to remove...

Gerald Boutin
 

On Wed, Oct 24, 2018 at 07:57 AM, Mike Doe wrote:
... psk and mt63 columns from worked/confirmed window?
Thanks, Mike
Mike,
Deleting them from "Tools > Setup Bands and Modes" will get rid of them. I haven't yet found a way to only disable the modes in the Worked / Confirm window.

--
Gerald, VE1DT


How to remove...

Mike
 

... psk and mt63 columns from worked/confirmed window?
Thanks, Mike


Re: Import Log From N1MM

Jim K2QB
 

Thanks Gerry! Great info that I wasn't aware of.

73 de K2QB


Re: Import Log From N1MM

Gerry Treas
 

Jim, AD1C, has an app that you run on the ADIF file before importing and it fixes that.  I have used it for years and it covers most if not all state QPs, some of the combination state QPs (IN7QPNE which also includes DEQP) NEWEQP (New England QP, NAQPs.  You can find out all of the QPs that it handles.

http://software.ad1c.us/ADIF_County/index.html

73, Gerry, K8GT


Re: DXCC 000 errors cropping up in logbook

Gary Hinson
 

A common example would be maritime mobiles: they may sign and upload their logs to LoTW, and match your QSO details, but they don’t count towards DXCC.  They do, however, count towards the ARRL grid challenge if they confirmed their grids.

 

Also I deliberately use DXCC=000 for DX QSOs in my log that cannot be confirmed, in order to take them out of the statistics.

73
Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Dan Atchison via Groups.Io
Sent: 23 October 2018 05:05
To: hamlogger@groups.io
Subject: Re: [hamlogger] DXCC 000 errors cropping up in logbook

 

Were the operations approved by the DXCC desk?  Do the approved dates for the operations match what is in your logbook?  Do you use ClubLog to "verify" your Q's?

In all cases in my log (~50K Q's), those with DXCC=000 are for operations that were either not approved or the dates were incorrect or out of operation activity timelines (pirate?).

In all cases within my log where I show DXCC=000, my logbook was incorrect or matched the above qualifications. 

73,
Dan

On 10/22/2018 11:46 AM, Pete Smith wrote:

Recently, I started trying to sync my logbook with LOTW.  I quickly gave up, though, because once every few QSOs, a QSO would turn up in the logbook with DXCC=000.  This happens, as nearly as I can tell, on QSOs logged directly in Logger 32.  Any ideas what is going on and how to stop it?

-- 
 
73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

 


Re: DXCC 000 errors cropping up in logbook

Pete Smith <n4zr@...>
 

All those 000s were somehow put in my log as it was entered.  I did discover, though, that there were hundreds more in some transferred contest logs. 

I've belatedly discovered the Clublog verification process, and am running it now.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 10/22/2018 12:05 PM, Dan Atchison via Groups.Io wrote:

Were the operations approved by the DXCC desk?  Do the approved dates for the operations match what is in your logbook?  Do you use ClubLog to "verify" your Q's?

In all cases in my log (~50K Q's), those with DXCC=000 are for operations that were either not approved or the dates were incorrect or out of operation activity timelines (pirate?).

In all cases within my log where I show DXCC=000, my logbook was incorrect or matched the above qualifications. 

73,
Dan


On 10/22/2018 11:46 AM, Pete Smith wrote:

Recently, I started trying to sync my logbook with LOTW.  I quickly gave up, though, because once every few QSOs, a QSO would turn up in the logbook with DXCC=000.  This happens, as nearly as I can tell, on QSOs logged directly in Logger 32.  Any ideas what is going on and how to stop it?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.


Re: DXCC 000 errors cropping up in logbook

Dan Atchison
 

Were the operations approved by the DXCC desk?  Do the approved dates for the operations match what is in your logbook?  Do you use ClubLog to "verify" your Q's?

In all cases in my log (~50K Q's), those with DXCC=000 are for operations that were either not approved or the dates were incorrect or out of operation activity timelines (pirate?).

In all cases within my log where I show DXCC=000, my logbook was incorrect or matched the above qualifications. 

73,
Dan


On 10/22/2018 11:46 AM, Pete Smith wrote:

Recently, I started trying to sync my logbook with LOTW.  I quickly gave up, though, because once every few QSOs, a QSO would turn up in the logbook with DXCC=000.  This happens, as nearly as I can tell, on QSOs logged directly in Logger 32.  Any ideas what is going on and how to stop it?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.


DXCC 000 errors cropping up in logbook

Pete Smith <n4zr@...>
 

Recently, I started trying to sync my logbook with LOTW.  I quickly gave up, though, because once every few QSOs, a QSO would turn up in the logbook with DXCC=000.  This happens, as nearly as I can tell, on QSOs logged directly in Logger 32.  Any ideas what is going on and how to stop it?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.


Re: Import Log From N1MM

Vilhjalmur Sigurjonsson
 

Jim,

I do not know about any other way than revert to a previous version of your log, add the state field to the N1MM file and import it again.

 

Keep backups frequently, you can even configure the import procedure to backup automatically before importing (it is in the backup menu under configure)

The order of the fields in the adif file is not important, you can have the text editor look for a string that you know to be in every entry and add your missing „<STATE:2>NY“ to it. E.g. search for „<BAND“ and replace with „<STATE:2>NY <BAND“

73 Villi
TF3VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Jim Ciurczak
Sent: sunnudagur, 21. október 2018 11:30
To: hamlogger@groups.io
Subject: [hamlogger] Import Log From N1MM

 

[Edited Message Follows]

Just completed the NYQP and when I import the log from N1MM+ the state field is blank. N1MM has the state listed under Section. Is there a way to import the log and have the state included in Logger32? And I assume I will need to delete my logbook files and import my backup log to get it back to where it was prior to the NYQP import I already did. 

Jim K2QB


Import Log From N1MM

Jim K2QB
 
Edited

Just completed the NYQP and when I import the log from N1MM+ the state field is blank. N1MM has the state listed under Section. Is there a way to import the log and have the state included in Logger32? And I assume I will need to delete my logbook files and import my backup log to get it back to where it was prior to the NYQP import I already did. 

Jim K2QB


Re: Question about

Giuseppe Giunta
 

Wow! Grazie Jerzy 😊

73 Giu

Il Ven 19 Ott 2018, 18:17 Jerzy Smietanski SP9AUV <sp9auv@...> ha scritto:
Hello IT9VDQ  !
Thank you Giu for your opinion as programmer .
You can try this method as descibing Vili .

Also can do this in this bellow method . Use N1MM plus as logger contest .
In the contest you can call function Statistic  as there on this picture

 

Then you see this Statistic as in this picture



From N1MM plus logger import all QSO as ADIF  format .
If you need personal data you can use use may program Looking HAM DATA .
It can download personal data for amateur station from 4-th server as QRZ
But Warning !
  QRZ.COM is very restricted . From there you can quicly download data only for 8 station . Next must wait about 3 minutes to continue
In a one day can download only 150 stations .
Anothers server cannot have this restriction .

Looking HAM DATA you can download from
  http://sp9auv.com/EN/index.html?downloading_looking_ham_data_and_version_history.php

                       Vy 73 de Jerzy SP9AUV






W dniu 2018-10-19 o 05:36, Giuseppe Giunta pisze:
Grazie Villi
I will try it
           Giu

Il Gio 18 Ott 2018, 20:59 Vilhjalmur Sigurjonsson <vilhj@...> ha scritto:
Giu,
Sorry for me intruding your conversation with Jerzy, but I just wanted to mention that if you have access to Excel this is not complicated.
You have to export your log to a comma (or a semicolon) delimited file, open it in Excel and do some tricks.
What I would do is to add two new columns.
One with the contest name plus the year the contest was. It can be done with a formula in the new column, e.g. "=CONCATENATE(B1;RIGHT(YEAR(A1);2))"
You would have to modify this for the real column names in your table, but in this case it is assumed that the contest name is in column B and the date is in column A.
The other new column would have just the number 1 in every field.
Now you can select these two columns and insert a pivot table (preferably to a new table). You specify the contest nameyear as the column and the 1 column as a data.

This is probably just one of many ways to do it, hi, but lets see what others might suggest.
73 Villi
TF3VS


-----Original Message-----
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Giuseppe Giunta
Sent: fimmtudagur, 18. október 2018 15:20
To: hamlogger@groups.io; sp9auv@...
Subject: [hamlogger] Question about

Hi Jerzy,
I saw on the "Hamlogger list" that you are an expert programmer and I have often used your software to do the contests as SWL ... thanks for this ... I have a small problem to solve: I have all my +100.000 qso loaded on Logger32, and in particular, in those of the various CWT contest I put the CWT string in the "Contest" field; now, I would like to know, without having to count them one by one :-) , how many qso I have done "in every single session" of each CWT contest. Let's say I'd like to know in which day it went better, in which section (13z, 19z or
05z) and so on. I'd like to know my highest qso number ever made in a CWT contest/session. Can you give me an idea, maybe exporting the log to ADIF and working with some special software? Sorry for the trouble.
Thanks in advance de Giu, IT9VDQ
(one of IB9T)

Sorry for my bad english









Wolny od wirusów. www.avast.com

11221 - 11240 of 86184