Date   

New windows

BTX
 

Hello everybody
When I click on a DX spot (cluster windows) the call sign is transferred to the window operator (normal ..) but at the same time, a new large window appears where the same Call sign  appears with a large font red color .. No menu on this window. I can move this window, that's all.
 Can someone illuminate my lantern? 
73
Jean-Pierre

Thanks in advance.
Mailto: f6itd@...


Re: Cannot export Files to LoTW and eQSL

gboutin@...
 

Jim,

The exports may be working, but the problem is with the "Only QSOs by" filter. The current callsign is not offered as a choice.

The steps are easy to repro: 
File > Export Files > Export to LoTW
The presented menu does not allow using the active callsign.

Perhaps it works if there is only one callsign. I have several in my logbook. The old ones show up as choices, but not the active callsign. QSOs are flagged as "Send LOTW QSL".

I also tried adding a new callsign as a test and entered a test QSO. The new callsign also does not show up in the "Only QSOs by" filter.

I don't use eQSL, so can't add anything there.

> Gerald, VE1DT



---In hamlogger@..., <w5ifp@...> wrote :

Tony,

The LOTW & eQSL export files are working.

Please remind us of what you are trying to do that is not working for you.

Tell us the exact procedure that you used.

73, Jim – w5ifp@...



From: hamlogger@... [mailto:hamlogger@...]
Sent: Thursday, June 29, 2017 3:45 PM
To: hamlogger@...
Subject: RE: [hamlogger] Cannot export Files to LoTW and eQSL








I just upgraded to version 3.50.323 (latest release), but the problem remains. Any further suggestions? I could possibly be missing something.



Thanks

Tony KU4NY










[Non-text portions of this message have been removed]


Logger 32 telnet message sends radio into transmit

w4wtb2003
 

I just upgraded Windows 10 and that's when the problem started. 

I use the telnet message window to communicate with a friend of mine while we search for DX.

But now when he sends me a message, my FTDX 5000 will transmit a tone for 2-3 seconds.

This doesn't happen when I send a message ..... only on incoming telnet messages.

My Logger 32 version is up to date and all other functions work as they should.

The program worked fine on Windows 10 until I installed the recommended upgrade.


Any ideas on a fix ?


de N4LA / Todd


Re: LOTW user in band maps

steve fetter
 

Thanks, I did what I should have done before posting, I reloaded the LOTW file and everything OK. Strange though, it worked fine yesterday and gone today. Been using Logger32 for many many years and that never happened!!

Thanks,


Re: Cannot export Files to LoTW and eQSL

cr7wp2f3ps4pyumxzlkdktztoxvftpuzudhxwb7f@...
 

Jim,

Thanks for the reply.

I've been exporting to LoTW (and eQSL) with no trouble for almost 3 years with no trouble until now. 

In the Logbook Entry window setup menu, I have the QSLing and QSO export option set to Flag QSO's for eQSL and LoTW.  My callsign, KU4NY, appears in the top-right corner of the Logbook Entry window after "Operator:".  And when I right-click in the Logbook page, the "Send eQSL" and "Send LoTW QSL" are checked.

In the Main Menu when I click on Files/Export files/Export LoTW file, the "Export LOTW records" dialog box only lists "All Operators" in the "Only QSOs by" section of the dialog box; my callsign is not listed. If I select "All Operators", I get an "Invalid selection" error message stating "There are no QSOs with All Operators flagged to be put in the LOTW file". 

This was happening with eQSL also ... BUT after the most recent update, my callsign DID show up when I selected "Export eQSL file.  But now, when I select "Export eQSL file, I get an "Invalid selection" message stating "There are no QSOs flagged to be put in the eQSL file" even though there are QSOs in my log flagged for eQSL
 
I'm not as concerned about eQSL (I plan to discontinue its use), but I do need to keep up my LoTW files.

I should mention that I've been using the LoTW/eQSL Utility by N2AMG for quite some time.  But that doesn't seem to be related to the problem since it's occurring when I attempt to export using the Logger32 File menu.

I should also mention how satisfied I am with Logger32. I've been using it for almost 4 years now.  It's a great program with all the features I will ever need, and then some.

I hope this isn't too long-winded and that it makes sense.  I'm hoping to avoid an "uninstall and re-install" if at all possible.

I really appreciate your valuable time and assistance.

Thanks, and best 73!
Tony
KU4NY

---In hamlogger@..., <w5ifp@...> wrote :

Tony,

The LOTW & eQSL export files are working.

Please remind us of what you are trying to do that is not working for you.

Tell us the exact procedure that you used.

73, Jim – w5ifp@...



From: hamlogger@... [mailto:hamlogger@...]
Sent: Thursday, June 29, 2017 3:45 PM
To: hamlogger@...
Subject: RE: [hamlogger] Cannot export Files to LoTW and eQSL








I just upgraded to version 3.50.323 (latest release), but the problem remains. Any further suggestions? I could possibly be missing something.



Thanks

Tony KU4NY










[Non-text portions of this message have been removed]


Re: LOTW user in band maps

Gerry VE6LB
 

 
All OK here.
 
Gerry VE6LB
 

From: smfetter@... [hamlogger]
Sent: Sunday, July 02, 2017 09:54
To: hamlogger@...
Subject: [hamlogger] LOTW user in band maps
 
 

All the sudden I'm not seeing which spots use LOTW in the band maps. Anyone else have them disappear? My settings seem correct.


LOTW user in band maps

steve fetter
 

All the sudden I'm not seeing which spots use LOTW in the band maps. Anyone else have them disappear? My settings seem correct.


Re: Order of the modes in WORKED/CONFIRMED window

F6FLU@gmx.com <F6FLU@...>
 

:-)


--
Daniel

F6FLU
Daniel Lavocat
F6FLU@...
http://F6FLU.fr

F6KOP Team #1277


UFT #1277
  
CDXC #1632   DXCC CW #13586 

30 juin 2017 à 16:21

 
It worked, Merci Daniel


73's Filipe Lopes 
CT1ILT - CR6K
F4VPX - TM3M 



Posted by: Filipe Lopes



Re: Order of the modes in WORKED/CONFIRMED window

Filipe Lopes
 

It worked, Merci Daniel


73's Filipe Lopes 
CT1ILT - CR6K
F4VPX - TM3M 

2017-06-30 15:55 GMT+02:00 'F6FLU@...' F6FLU@... [hamlogger] <hamlogger@...>:

 

Hello

It's normal L32 pick up from the top to down so in your case JT65 is the first.

It is enough that before JT65 to adds a phone frequency in SSB and in front of the SSB a frequency for the CW and there you will have CW, SSB then JT65


CW 50280000 50300000
SSB 50278000 5028000
JT65 50276000 50278000
SSB 50109000 50220000
CW 5000000 50109000

==> CW / SSB / JT65

:-)


--
Daniel

F6FLU
Daniel Lavocat
F6FLU@...
http://F6FLU.fr

F6KOP Team #1277


UFT #1277
  
CDXC #1632   DXCC CW #13586 


30 juin 2017 à 14:37
 

Hi guys,

I wonder if somehow it is possible to change the order of the modes in the
worked/confirmed window.

In my case I have JT65 | SSB | CW | RTTY | PSK

I would like to put JT65 in the end.

Anyone know how to do this?

Thanks

[image: Imagem intercalada 1]

73's Filipe Lopes
CT1ILT - CR6K
F4VPX - TM3M

[Non-text portions of this message have been removed]

 

Go to Files > Setup Bands & Modes

Change the Stats columns to N for all the JT65 band lines. Apply and
check that JT65 has vanished from the Worked/Confirmed window.

Go back to Files > Setup etc and change the stats lines for JT65 to Y.

JT65 should now show at the end of your list in Worked/Confirmed.

The modes seem to be positioned in the worked/confirmed window in the
order they were first checked when creating the Bands & Modes table.

Regards,

Mike VP8NO

On 30/06/2017 09:37, Filipe Lopes ct1ilt@... [hamlogger] wrote:
> Hi guys,
>
> I wonder if somehow it is possible to change the order of the modes in the
> worked/confirmed window.
>
> In my case I have JT65 | SSB | CW | RTTY | PSK
>
> I would like to put JT65 in the end.
>
> Anyone know how to do this?
>
> Thanks
>
> [image: Imagem intercalada 1]
>
> 73's Filipe Lopes
> CT1ILT - CR6K
> F4VPX - TM3M

30 juin 2017 à 15:41
 
Hi Mike,

it does not work. Eveytime I check the Y on the JT65 it goes back to before SSB but I think it has something to do with the order in which mode are displayed according to each band segment.
For example:

on 6m  I have 
JT65 50.276 - 50.276
SSB 50.109 - 50.220
CW 50.000 - 50.109

I guess this is why the JT65 appears to the left and not on the right. The problem is that we have to put the freq in the right order otherwise we an error.... well I guess I will just leave it like this. Would be so much easier to just click on the JT65 colone and drag it to last ....


73's Filipe Lopes 
CT1ILT - CR6K
F4VPX - TM3M 





Re: Order of the modes in WORKED/CONFIRMED window

F6FLU@gmx.com <F6FLU@...>
 

Hello

It's normal L32 pick up from the top to down so in your case JT65 is the first.

It is enough that before JT65 to adds a phone frequency in SSB and in front of the SSB a frequency for the CW and there you will have CW, SSB then JT65

CW 50280000 50300000
SSB 50278000 5028000
JT65 50276000 50278000
SSB 50109000 50220000
CW 5000000 50109000

==> CW / SSB / JT65

:-)


--
Daniel

F6FLU
Daniel Lavocat
F6FLU@...
http://F6FLU.fr

F6KOP Team #1277


UFT #1277
  
CDXC #1632   DXCC CW #13586 


30 juin 2017 à 14:37
 

Hi guys,

I wonder if somehow it is possible to change the order of the modes in the
worked/confirmed window.

In my case I have JT65 | SSB | CW | RTTY | PSK

I would like to put JT65 in the end.

Anyone know how to do this?

Thanks

[image: Imagem intercalada 1]

73's Filipe Lopes
CT1ILT - CR6K
F4VPX - TM3M



 

Go to Files > Setup Bands & Modes

Change the Stats columns to N for all the JT65 band lines. Apply and
check that JT65 has vanished from the Worked/Confirmed window.

Go back to Files > Setup etc and change the stats lines for JT65 to Y.

JT65 should now show at the end of your list in Worked/Confirmed.

The modes seem to be positioned in the worked/confirmed window in the
order they were first checked when creating the Bands & Modes table.

Regards,

Mike VP8NO

On 30/06/2017 09:37, Filipe Lopes ct1ilt@... [hamlogger] wrote:
> Hi guys,
>
> I wonder if somehow it is possible to change the order of the modes in the
> worked/confirmed window.
>
> In my case I have JT65 | SSB | CW | RTTY | PSK
>
> I would like to put JT65 in the end.
>
> Anyone know how to do this?
>
> Thanks
>
> [image: Imagem intercalada 1]
>
> 73's Filipe Lopes
> CT1ILT - CR6K
> F4VPX - TM3M

30 juin 2017 à 15:41
 
Hi Mike,

it does not work. Eveytime I check the Y on the JT65 it goes back to before SSB but I think it has something to do with the order in which mode are displayed according to each band segment.
For example:

on 6m  I have 
JT65 50.276 - 50.276
SSB 50.109 - 50.220
CW 50.000 - 50.109

I guess this is why the JT65 appears to the left and not on the right. The problem is that we have to put the freq in the right order otherwise we an error.... well I guess I will just leave it like this. Would be so much easier to just click on the JT65 colone and drag it to last ....


73's Filipe Lopes 
CT1ILT - CR6K
F4VPX - TM3M 




Re: Cannot export Files to LoTW and eQSL

Jim Hargrave
 

Tony,

The LOTW & eQSL export files are working.

Please remind us of what you are trying to do that is not working for you.

Tell us the exact procedure that you used.

73, Jim – w5ifp@...



From: hamlogger@... [mailto:hamlogger@...]
Sent: Thursday, June 29, 2017 3:45 PM
To: hamlogger@...
Subject: RE: [hamlogger] Cannot export Files to LoTW and eQSL








I just upgraded to version 3.50.323 (latest release), but the problem remains. Any further suggestions? I could possibly be missing something.



Thanks

Tony KU4NY










[Non-text portions of this message have been removed]


Re: Order of the modes in WORKED/CONFIRMED window

Filipe Lopes
 

Hi Mike,

it does not work. Eveytime I check the Y on the JT65 it goes back to before SSB but I think it has something to do with the order in which mode are displayed according to each band segment.
For example:

on 6m  I have 
JT65 50.276 - 50.276
SSB 50.109 - 50.220
CW 50.000 - 50.109

I guess this is why the JT65 appears to the left and not on the right. The problem is that we have to put the freq in the right order otherwise we an error.... well I guess I will just leave it like this. Would be so much easier to just click on the JT65 colone and drag it to last ....


73's Filipe Lopes 
CT1ILT - CR6K
F4VPX - TM3M 

2017-06-30 14:56 GMT+02:00 Mike Harris mike.harris@... [hamlogger] <hamlogger@...>:

 

Go to Files > Setup Bands & Modes

Change the Stats columns to N for all the JT65 band lines. Apply and
check that JT65 has vanished from the Worked/Confirmed window.

Go back to Files > Setup etc and change the stats lines for JT65 to Y.

JT65 should now show at the end of your list in Worked/Confirmed.

The modes seem to be positioned in the worked/confirmed window in the
order they were first checked when creating the Bands & Modes table.

Regards,

Mike VP8NO



On 30/06/2017 09:37, Filipe Lopes ct1ilt@... [hamlogger] wrote:
> Hi guys,
>
> I wonder if somehow it is possible to change the order of the modes in the
> worked/confirmed window.
>
> In my case I have JT65 | SSB | CW | RTTY | PSK
>
> I would like to put JT65 in the end.
>
> Anyone know how to do this?
>
> Thanks
>
> [image: Imagem intercalada 1]
>
> 73's Filipe Lopes
> CT1ILT - CR6K
> F4VPX - TM3M



Re: Order of the modes in WORKED/CONFIRMED window

Filipe Lopes
 

Merci Daniel, je essayer comme tu dit.

Cordialement 


73's Filipe Lopes 
CT1ILT - CR6K
F4VPX - TM3M 

2017-06-30 14:54 GMT+02:00 'F6FLU@...' F6FLU@... [hamlogger] <hamlogger@...>:

 

Hello
In FRENCH (sorry)

Il suffit dans Tools/ Edit Band & modes de mettre Y dans les stats dans l'ordre que tu veux
Pour cela je crée des parties "bidon", dans ton cas il suffit de valider il suffit de valider SSB / CW / RTTY /PSK avant JT65 donc de créer une plage de fréquence après tous ces modes même si cette place n'est pas réelle

Exemple moi je veux CW / SSB / JT65 / PSK / RTTY
et je ne valide mes stats qu'à partir du 6M

Donc je crée
6M CW 50.280000 to 50.300000 et Y dans stats puis
6M SSB 50.277000 to 50.280000 et Y dans stats puis
6M JT65 50.276000 to 50.277000 et Y dans stats puis
6M PKT 50.250000 to 50.250000 et Y dans stats puis
etc ...
c'est pas obligé d'être dans la même bande il suffit que tu valides juste l'ordre que tu veux voir appraitre les stats

en espérant que ça aide
73


--
Daniel

F6FLU
Daniel Lavocat
F6FLU@...
http://F6FLU.fr

F6KOP Team #1277


UFT #1277
  
CDXC #1632   DXCC CW #13586 


30 juin 2017 à 14:37
 

Hi guys,

I wonder if somehow it is possible to change the order of the modes in the
worked/confirmed window.

In my case I have JT65 | SSB | CW | RTTY | PSK

I would like to put JT65 in the end.

Anyone know how to do this?

Thanks

[image: Imagem intercalada 1]

73's Filipe Lopes
CT1ILT - CR6K
F4VPX - TM3M






Re: Order of the modes in WORKED/CONFIRMED window

Michael Harris
 

Go to Files > Setup Bands & Modes

Change the Stats columns to N for all the JT65 band lines. Apply and check that JT65 has vanished from the Worked/Confirmed window.

Go back to Files > Setup etc and change the stats lines for JT65 to Y.

JT65 should now show at the end of your list in Worked/Confirmed.

The modes seem to be positioned in the worked/confirmed window in the order they were first checked when creating the Bands & Modes table.

Regards,

Mike VP8NO

On 30/06/2017 09:37, Filipe Lopes ct1ilt@... [hamlogger] wrote:
Hi guys,
I wonder if somehow it is possible to change the order of the modes in the
worked/confirmed window.
In my case I have JT65 | SSB | CW | RTTY | PSK
I would like to put JT65 in the end.
Anyone know how to do this?
Thanks
[image: Imagem intercalada 1]
73's Filipe Lopes
CT1ILT - CR6K
F4VPX - TM3M


Re: Order of the modes in WORKED/CONFIRMED window

F6FLU@gmx.com <F6FLU@...>
 

Hello
In FRENCH (sorry)

Il suffit dans Tools/ Edit Band & modes de mettre Y dans les stats dans l'ordre que tu veux
Pour cela je crée des parties "bidon", dans ton cas il suffit de valider il suffit de valider SSB / CW / RTTY /PSK avant JT65 donc de créer une plage de fréquence après tous ces modes même si cette place n'est pas réelle

Exemple moi je veux CW / SSB / JT65 / PSK / RTTY
et je ne valide mes stats qu'à partir du 6M

Donc je crée
6M CW 50.280000 to 50.300000 et Y dans stats puis
6M SSB 50.277000 to 50.280000 et Y dans stats puis
6M JT65 50.276000 to 50.277000 et Y dans stats puis
6M PKT 50.250000 to 50.250000 et Y dans stats puis
etc ...
c'est pas obligé d'être dans la même bande il suffit que tu valides juste l'ordre que tu veux voir appraitre les stats

en espérant que ça aide
73

--
Daniel

F6FLU
Daniel Lavocat
F6FLU@...
http://F6FLU.fr

F6KOP Team #1277


UFT #1277
  
CDXC #1632   DXCC CW #13586 


30 juin 2017 à 14:37
 

Hi guys,

I wonder if somehow it is possible to change the order of the modes in the
worked/confirmed window.

In my case I have JT65 | SSB | CW | RTTY | PSK

I would like to put JT65 in the end.

Anyone know how to do this?

Thanks

[image: Imagem intercalada 1]

73's Filipe Lopes
CT1ILT - CR6K
F4VPX - TM3M





Order of the modes in WORKED/CONFIRMED window

Filipe Lopes
 

Hi guys,

I wonder if somehow it is possible to change the order of the modes in the
worked/confirmed window.

In my case I have JT65 | SSB | CW | RTTY | PSK

I would like to put JT65 in the end.

Anyone know how to do this?

Thanks

[image: Imagem intercalada 1]

73's Filipe Lopes
CT1ILT - CR6K
F4VPX - TM3M


Re: Adding 60 meters to the Band Plan

Larry Fravel
 

That did it John. thanks.  Got to edit a few things in there as well.
 
Larry K8YYY
 
It's easier to fool people than convince them that they've been fooled.
Mark Twain

Virus-free. www.avg.com


Re: Cannot export Files to LoTW and eQSL

cr7wp2f3ps4pyumxzlkdktztoxvftpuzudhxwb7f@...
 

I just upgraded to version 3.50.323 (latest release), but the problem remains. Any further suggestions? I could possibly be missing something.

Thanks
Tony KU4NY


Re: Adding 60 meters to the Band Plan

Larry Fravel
 

Thanks John, I’ll give it a try.
 
Larry K8YYY
 
It's easier to fool people than convince them that they've been fooled.
Mark Twain

Virus-free. www.avg.com


Re: Adding 60 meters to the Band Plan

John Munton <JOHNG7SSE@...>
 

Larry

Open your Logger32 directory and look for and open, with Notepad, the file ADIFBands.txt
If 60m is not present just add it in the appropriate position in the list.
Then try making your entry in your Band Mode Table again.

73
John
G7SSE 

------ Original Message ------
From: "'Larry R Fravel' lfravel@... [hamlogger]" <hamlogger@...>
Sent: 29/06/2017 20:23:40
Subject: [hamlogger] Adding 60 meters to the Band Plan

 

I am running latest update – 3.50.323 and am trying to add the 60 meter band into the band map.  As soon as I put 60 under the band in the editor I immediately get the error 60 is not a valid ADIF band and I cannot continue.  Have they not put 60 meters into the acceptable list of bands in ADIF?  Is there a work around?
 
Larry K8YYY
 
It's easier to fool people than convince them that they've been fooled.
Mark Twain

alt Virus-free. www.avg.com

16861 - 16880 of 88599