Date   

Re: Hi

w0fm@...
 

Hi Fred,
Thanks for picking things up. Bob, K4CY, responded to an email of mine
regarding importing LogWindows to Logger and told me of the group's move. He
said someone here might know the whereabouts of any of the routines that
would convert my LogWindows logs to Logger. Can you (or anyone else) steer
me in the right direction for that? Thanks,

Terry, WØFM


Re: Hi

Fred Decker <fdecker@...>
 

Welcome! Yes, the list manager for the old list just decided he had
enough and pulled the plug. He expressed that none of the old archives or
anything be revived or associated with him. He may profide info about
people who want to be on a list, but if each person goes through their old
emails and sends a notice to people who aren't over here yet, we will grow
again quickly.

Please visit the home page at egroups for more inforamtion such as who is
subscribed, a file and link section, polls, and a lot more that we can use
in the future.

Fred Decker
N4IXL
Moderator


Hi Everyone. Glad I found this list, as th old Logger List was
apparently deleted without notice!
--
Cul8r


Hi

Martin <rutherford.ulea@...>
 

Hi Everyone. Glad I found this list, as th old Logger List was
apparently deleted without notice!
--
Cul8r

Martin Campbell rutherford.ulea@mcleodusa.net KB0HAE

Want to help stop Spam? (also known as UNSOLICITED COMMERCIAL E-MAIL)
Support the Anti-Spam Amendment. Join at http://www.cauce.org/


Re: Enhancement suggestions

K4SB <k4sb@...>
 

Rick Williams wrote:

Yes Logger will pick up the packets and post them even if not connected BUT
unless you have a great path (I don't) it's risky since you're never sure if
ALL the packets are being received.
73,
Rick
VE7ASR
Perhaps something to ease your minds in this particular case. The
packet code is set to look at the next spot which appears and
see if it is substantially equal to the last one. For example,
let's say you are monitoring a cluster with 20 people connected.
I put out a spot. That spot is then sent to the other 19
connections by the cluster. So, in essense, you have in this
example 19 chances of getting the spot. Just imagine the first 5
or so are missing some iformation. Since they do not represent
the proper protocal for packet, they are ignored. Let's say #8
comes through OK. You will see it displayed, and of course , #9
through ? are ignored. Of course, the odds of your getting the
packet under marginal conditions are a function of the number of
individuals connected to the node.

73
Ed


Re: Enhancement suggestions

K4SB <k4sb@...>
 

Yes, you definitely do not have to be connected to get spots in
the small window. Am trying to get Bob to extend the filter
capability to the Cluster window also. Remember, any filters you
set for packet are ONLY applicable to the small window.


BTW, Bob told me yesterday that he expects to release the first
version of Zanakaka ( or however it's spelled ) by the end of the
week.

73
Ed


Re: Enhancement suggestions

Rick Williams <ve7asr@...>
 

Steve Logger will allow you to use the "DX Cluster" window to click and QSY
BUT that window only receives data for DX spots that occur AFTER you have
connected. So a Show/DX won't be of much help in that case. Stay connected
for a while or send a DX spot as a test and see what happens.

Yes Logger will pick up the packets and post them even if not connected BUT
unless you have a great path (I don't) it's risky since you're never sure if
ALL the packets are being received.
73,
Rick
VE7ASR

-----Original Message-----
From: Stephen Carroll [mailto:carrollst@yahoo.com]
Sent: Monday, April 24, 2000 20:27 PST
To: hamlogger@egroups.com
Subject: Re: [hamlogger] Enhancement suggestions


Thanks for the reply. To clarify however, there's a small "DX Cluster"
window (upper right) and then the "Packet Cluster" window.

If I sit down in the shack, turn on the 2m rig & tnc and then connect
to the local cluster there are NO spots in the "DX Cluster" window (yet).
So I type SH/DX in the "Packet Cluster" window to find out what the last
few spots have been while my packet gear was offline. In the XMLOG soft-
ware I was able to click in this window and QSY the radio too. I was just
curious if it could be done in LOGGER or not. I guess not !!! It's really
not a big deal to have to MANUALLY tune the rig for those first few spots
until the "DX Cluster" window starts listing the spots.

Did I understand that you don't even need to be connected for the "DX
Cluster" window to fill up with spots?


I really like this LOGGER program !!!

73, Steve - K2SC

--- K4SB <k4sb@mindspring.com> wrote:
carrollst@yahoo.com wrote:

Also, it would be nice to also be able to click on a spot from
within the packet window in order to QSY my TS-850S/AT.

73, Steve - K2SC
Well Steve, assumming the "packet window" you speak of is the
small display at the top right, Logger will do exactly what you
sayl put the call in the log window and set your radio right on
the spot.

73
Ed
__________________________________________________
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com

----------------------------------------------------------------------------
----



----------------------------------------------------------------------------
----
To unsubscribe from this group, send an email to:
hamlogger-unsubscribe@egroups.com

Visit this site for logger and other downloads: http://www.itis.net/golist/


Re: Enhancement suggestions

Stephen Carroll <carrollst@...>
 

Thanks for the reply. To clarify however, there's a small "DX Cluster"
window (upper right) and then the "Packet Cluster" window.

If I sit down in the shack, turn on the 2m rig & tnc and then connect
to the local cluster there are NO spots in the "DX Cluster" window (yet).
So I type SH/DX in the "Packet Cluster" window to find out what the last
few spots have been while my packet gear was offline. In the XMLOG soft-
ware I was able to click in this window and QSY the radio too. I was just
curious if it could be done in LOGGER or not. I guess not !!! It's really
not a big deal to have to MANUALLY tune the rig for those first few spots
until the "DX Cluster" window starts listing the spots.

Did I understand that you don't even need to be connected for the "DX
Cluster" window to fill up with spots?


I really like this LOGGER program !!!

73, Steve - K2SC

--- K4SB <k4sb@mindspring.com> wrote:
carrollst@yahoo.com wrote:

Also, it would be nice to also be able to click on a spot from
within the packet window in order to QSY my TS-850S/AT.

73, Steve - K2SC
Well Steve, assumming the "packet window" you speak of is the
small display at the top right, Logger will do exactly what you
sayl put the call in the log window and set your radio right on
the spot.

73
Ed
__________________________________________________
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com


Re: Enhancement suggestions

K4SB <k4sb@...>
 

Rick Williams wrote:

Steve you can turn off the "Packet Cluster Window" after you're connected.
You will notice in the upper right corner that the "DX Cluster" window
contains the spots. If you click on the spot you want the rig WILL QSY to
the appropriate frequency and, if set up correctly, the appropriate mode.

I usually have the Packet Cluster Window off and the DATA port open looking
at RTTY etc.
73,
Rick
VE7ASR
Another small point, you do NOT have to be connected to utilize
the "packet window".

73
Ed


Re: Enhancement suggestions

K4SB <k4sb@...>
 

carrollst@yahoo.com wrote:

Also, it would be nice to also be able to click on a spot from
within the packet window in order to QSY my TS-850S/AT.

73, Steve - K2SC
Well Steve, assumming the "packet window" you speak of is the
small display at the top right, Logger will do exactly what you
sayl put the call in the log window and set your radio right on
the spot.

73
Ed


Re: Enhancement suggestions

Rick Williams <ve7asr@...>
 

Steve you can turn off the "Packet Cluster Window" after you're connected.
You will notice in the upper right corner that the "DX Cluster" window
contains the spots. If you click on the spot you want the rig WILL QSY to
the appropriate frequency and, if set up correctly, the appropriate mode.

I usually have the Packet Cluster Window off and the DATA port open looking
at RTTY etc.
73,
Rick
VE7ASR

-----Original Message-----
From: carrollst@yahoo.com [mailto:carrollst@yahoo.com]
Sent: Monday, April 24, 2000 12:59 PST
To: hamlogger@egroups.com
Subject: [hamlogger] Enhancement suggestions


--- ----- -----
Also, it would be nice to also be able to click on a spot from
within the packet window in order to QSY my TS-850S/AT.
----- ---- -----

73, Steve - K2SC


----------------------------------------------------------------------------
----



----------------------------------------------------------------------------
----
To unsubscribe from this group, send an email to:
hamlogger-unsubscribe@egroups.com

Visit this site for logger and other downloads: http://www.itis.net/golist/


Enhancement suggestions

carrollst@...
 

Having recently switched over from XMLOG to Logger, I miss the
ability to get "voice" spots via the program. It's helpful to
be working around the shack and hear all the spots verbally
instead of having to look at the computer screen. The XMLOG
software did this rather nicely. Any chance this could be looked
at for a future release.

Also, it would be nice to also be able to click on a spot from
within the packet window in order to QSY my TS-850S/AT.

Just a couple of quick ideas that I miss since switching over
(not that I have any intention of going back...)

73, Steve - K2SC


Uploading ASCII text in Packet Window?

carrollst@...
 

I've just recently switched over to Logger (from another
free program called "XMLOG"). Although it's taking me a
bit of time to get used to ALL the new features, I really
like the overall software package. I haven't figured out
how to upload a text file (like to the DX Cluster) from
within the packet window. Anyone know how to do this?

73, Steve - K2SC


Reluctance-to-change

Floyd Cook <fcook@...>
 

They say that old age is evidenced by a profound reluctance to
change. E-Gad --- I didn't know I was getting THAT old. And I think I
just experienced the reason for this reluctance. I hope I can get to
the "Reflector" with a click on the revised link on my MSIE Link,
like in the good 'ol days. Still love that Logger --- be careful
about any drastic changes to that Robert!
Best Regards,
Floyd Cook, W0YQX


Labels

Jeff <jeffpro@...>
 

Hi guys,
Glad to see there is still a help resource on eGroups for Logger
users...
Has anyone got any advice on configuring Logger to print on 3 across
labels? I've tried everything (and read the help file from front to
back I think) but still I can only get to print one across labels.
If One across is all I can manage it will have to be, its just that I
happen to have a supply of 3 across laser labels that I would like to
use before I go buy more labels!
TIA for any possible leads, and VMT to Fred for sorting out the
Hamlogger group...
73 de Jeff, ZC4JP


Re: LogWindows Conversion

lz1pj <lz1pj@...>
 

Hi Terry,
i have written a bunch of conversion programs, but not the one you need.
Send me a sample file to see what can be done.

73
Ivan Ivanoff 'Johny' - LZ1PJ

e-mail: lz1pj@omega.bg
lz1pj@qsl.net

Mailing address: P.O.Box 15
BG-1324 Sofia
Bulgaria

-----Original Message-----
From: A. Terry Schieler <w0fm@aol.com>
To: hamlogger@egroups.com <hamlogger@egroups.com>
Date: 23 ����� 2000 �. 21:17
Subject: [hamlogger] LogWindows Conversion


Hello all. Brand new at using Logger. Have about six years of logs
on LogWindows which, I understand, does not export ADIF format. Need
contact with a VERY PATIENT individual willing to help me locate the
necessary conversion tools and get my LogWindow logs imported to
Logger.

Thanks,
Terry, W�FM
w0fm@aol.com


------------------------------------------------------------------------
Your high school sweetheart-where is he now? With 4.4 million alumni
already registered at Classmates.com, there's a good chance you'll
find her here. Visit your online high school class reunion at:
http://click.egroups.com/1/3139/6/_/_/_/956510244/
------------------------------------------------------------------------

To unsubscribe from this group, send an email to:
hamlogger-unsubscribe@egroups.com

Visit this site for logger and other downloads: http://www.itis.net/golist/



Rigblaster

Curt <cdunn@...>
 

Thanks for reading:

Has anyone tried the Rigblaster as seen in QST or at the following URL:

http://www.westmountainradio.com with Logger, and especially with the
Kenwood TS-440 ?

Rigblaster just started a reflector at http://www.qth.net for anyone
interested this weekend. Perhaps it would be better to post replies
there, or email me directly with any comments, unless it directly
applies to Logger -:)

73, Curt KA2SLC


FT-840

Scott Thile <scott.thile@...>
 

Hi Folks,

Thanks, Fred for picking up the logger support list duties....

Glad to find it here.

I was hopping someone might be able to tell me what's involved in
making an interface for connecting a Yaseu FT 840 to the PC for use
with Logger.

Is it just a matter or wiring up the din plug the Yaesu wants with
correct pin outs to a DB25 or DB9, or is there a signal level
mismatch probelm to be solved first?

I hope to have an 840 soon and want to aviod ordering the Yaesu
interface at $95 if at all possible.

Thanks,
Scott, KU4GR
------


(No subject)

Curt <cdunn@...>
 


Joined..

Paul Haavin / LA5QIA <la5qia@...>
 

Hello..
LA5QIA joined the "company".. :)


73's de LA5QIA / Paul.


Re: LogWindows Conversion

Rick Williams <ve7asr@...>
 

I think there are some conversion tools on the VE9DX site. These may meet
your needs!

http://ve9dx.weblink.nbtel.net/

Good luck,

Rick
VE7ASR

-----Original Message-----
From: A. Terry Schieler [mailto:w0fm@aol.com]
Sent: Sunday, April 23, 2000 10:17 PST
To: hamlogger@egroups.com
Subject: [hamlogger] LogWindows Conversion


Hello all. Brand new at using Logger. Have about six years of logs
on LogWindows which, I understand, does not export ADIF format. Need
contact with a VERY PATIENT individual willing to help me locate the
necessary conversion tools and get my LogWindow logs imported to
Logger.

Thanks,
Terry, WØFM
w0fm@aol.com


----------------------------------------------------------------------------
----



----------------------------------------------------------------------------
----
To unsubscribe from this group, send an email to:
hamlogger-unsubscribe@egroups.com

Visit this site for logger and other downloads: http://www.itis.net/golist/

84721 - 84740 of 84768