Re: Porting Logger32 from old PC to new PC

Gary Hinson <Gary@...>

Aside from the auto-start utilities, you might also need to check that the particular fonts used in your installation of Logger32 are installed on the new PC.

Oh and if it is not stored in the Logger32 folder that you copied, you'll also need to transfer your log across - preferably doing a full ADIF export from the old PC, then an import on the new one.

Gary ZL2iFB

-----Original Message-----
From: <> On Behalf Of Michael Harris via
Sent: 28 July 2021 01:58
Subject: Re: [hamlogger] Porting Logger32 from old PC to new PC

Hi Normal,

Install a fresh copy on the new PC ensuring you use the same file path.
Don't mess about with any configuration all you are interested in is setting up the registration entries. Then replace it with your existing
L32 folder. You might have to correct any utility file paths in the .INI if they have not been installed in the same file locations.

Job done.


Mike VP8NO

On 27/07/2021 10:04, norman9795 via wrote:
I am looking for the easiest way to port my rxisting installation to a
new PC with the minimum of effort.


Join to automatically receive all group messages.