Re: Icom IC-7610 - radio setup

Vince Shirley

Thank you Aki that cured it

Very grateful for everyone's help.

Now another question.....

When using the macro   $QSY #Split+01q#$

I get a response from Logger32 "The BandPlan has no entries that match a frequency of  18099.0 MHz" -  which is true if it really did mean 18099 MHz but it should be 18099.0 kHz

Its clearly saying MHz instead of kHz 



On Sat, 24 Jul 2021 at 00:03, ja1nlx <ayoshida0205@...> wrote:

Check this, Read VFO-B Macro.

73 de aki

------ Original message ------
From: "Vince Shirley" <vince.g0orc@...>
To: "DAVID COLLIAU" <n8dc-8@...>
Date: 2021/07/24 7:16:00
Subject Re: [hamlogger] Icom IC-7610 - radio setup


Again, thanks but no joy.  I've set it up both as a 7300 or a 7800 but that doesn't seem to make a difference either.


On Fri, 23 Jul 2021 at 23:05, DAVID COLLIAU <n8dc-8@...> wrote:
In the radio setup try set DTR high. I thaink that fixes it. My 7300 is in the pickup so I wont get out to the garage till tomorrow.
Dave N8DC
On 07/23/2021 5:59 PM Vince Shirley <vince.g0orc@...> wrote:
Thank you but that doesn't seem to work.  "Split Operation" is still flashing away to itself.  I'm running SO2V and I see you are set up for SO2R, I don't know if that makes a difference
When the "Split Operation" box is flashing it makes it impossible to actually make any adjustments in Logger32 as the window focus appears to change.  I have to take the radio out of split, make the change and put it back into split again.
I've tried with both Legacy Poll on and off and that doesn't make any difference either.
Thanks - take care
Vince G0ORC

On Fri, 23 Jul 2021 at 22:43, John Munton - G7SSE < johng7sse@...> wrote:

The settings I've circled in the screen shots below might be what you need to look at;

73, John - G7SSE



Join to automatically receive all group messages.