Re: iCom 7610 and CW settings?

John Munton - G7SSE

Looks good Gary 👍

I think Aki got that from me! I went with the IC-7800 as being true dual receivers (unlike the 7600) I thought it the closest option to the IC-7610.

There's some stuff in the group files section, under IC-7610, if you've not seen it;

Ps. I have not forgotten about some Logger32 videos, sounds lame but just have not had the (quiet) time to look into it further yet.

Plus, I have the perfect face for radio and the perfect voice for FT8 😂

John - G7SSE

------ Original Message ------
From: "Gary Hinson" <Gary@...>
Sent: 08/04/2021 19:51:00
Subject: Re: [hamlogger] iCom 7610 and CW settings?

Thanks John,


I’ll be updating the IC-7610 section of the User Manual like this:




I notice the example radio configuration image (from Aki, I think) has Radio = Icom-7800.  I’d have thought the Icom-7600 would be closer but maybe I’m wrong.



Gary  ZL2iFB


From: <> On Behalf Of John Munton - G7SSE
Sent: 08 April 2021 21:42
Subject: Re: [hamlogger] iCom 7610 and CW settings?


Hi Brendan

Although I don't use CW the following is what I have got set up and working; (images below)

Do be aware that the serial port number you use in the CW Machine will be different to mine in the screenshots.

However the port number you need to use should be the higher numbered of the two ports (Silicon Labs CP210x USB-to-UART bridge) that appeared in Windows Device Manager when the radio was installed.
Icom refer to these two Com Ports (somewhat confusingly) as "A" and "B"


Hope some of this is helpful and sorry if I've touch on stuff you already know.

73, John - G7SSE

73, John - G7SSE

Join to automatically receive all group messages.