Re: Cherry picking


Bob
 

This is correct. You probable need to work new gridsquares once per band/mode, and not once per band/mode/month. SeventyThree(s).          

On 02/21/2021 3:05 PM Matthias Bellmann <dk4wd@...> wrote:
 
 
In the meantime i disabled in udp bandmap highlight colors "need gridsquare b/m in 2021 and "need gridsqare b/m in fbruary".
Was that my mistake?
 
 
Gesendet: Sonntag, 21. Februar 2021 um 20:58 Uhr
Von: "Matthias Bellmann" <Dk4wd@...>
An: hamlogger@groups.io
Betreff: Re: [hamlogger] Cherry picking
 
Hi Bob
no, the station being calles is NOT shown in UDP-Bandmap, it is show in JTDX marked green (as wkg b4)
Until today i used logger 3. 50something
event viewer shows "Need IN52 on 40m/FT8 in Februar" Suppose this is the point? What must i do?
 
Gesendet: Sonntag, 21. Februar 2021 um 20:51 Uhr
Von: "Bob" <k4cy@...>
An: hamlogger@groups.io
Betreff: Re: [hamlogger] Cherry picking
Well, Mattais, the first thing you have ignored is auto-update. The current version of Logger32 is v4.0.243 and there probably will be another one tomorrow.
 
When you say the cherry picker calls stations you have worked before, are those stations visible on the UDP BandMap? 
 
If you are configured for the cherry-picker to call any highlighted callsign, then the cherry-picker will do that. If a call is highlighted with "Need confirmation" color then the cherry picker will keep calling until the color is turned off. It does as it is told.
 
The Cherry-picker event viewer tell you exactly why it is calling a station. What does it say?
 
SeventyThree(s).
 
On 02/21/2021 2:36 PM Matthias Bellmann <dk4wd@...> wrote:
 
 
Some month ago i got cherry picking to work fine, but only for a short time.
I am using logger V 4.0.132 and HELP 4.0.242.
My setup:
udp bandmap - config - show/block callsigns worked before - :
      show/block callsigns qsod this band/mode b4
      block selected callsigns QSOd b4
Nevertheless my cherry-picker keeps calling stations qsod b4, even when the last qso was only few minutes ago.
Is there anything i ignored?
 73 Matthias dk4wd
 
 

Join hamlogger@groups.io to automatically receive all group messages.