Re: JTDX Control Panel


Jim Altman
 

Yes, you should be able to open the Control Panel either before or after, as long as JTDX was started from the bandmap.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Gary Hinson
Sent: Monday, February 1, 2021 6:44 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] JTDX Control Panel

 

OK, I was wrong.  You can start the JTDX Control Panel before or after launching JTDX using Start -> JTDX on the UDP BandMap.  It works either way.  So you can also close and then re-open the JTDX Control Panel if you like.

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Gary Hinson
Sent: 02 February 2021 09:57
To: hamlogger@groups.io
Subject: Re: [hamlogger] JTDX Control Panel

 

HI Bob.

 

The control panel didn’t work when I started it after JTDX … but I’ll try it again now, or rather “Now in a minute” as my Welsh grandmother used to say.

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: 02 February 2021 05:54
To: hamlogger@groups.io
Subject: Re: [hamlogger] JTDX Control Panel

 

Gary. I think you'll find that the JTDX control paned works correctly if it is started before or after JTDX. 73.

On 01/31/2021 9:44 PM Gary Hinson <gary@...> wrote:

 

 

Friends,

 

I’ve discovered that the JTDX Control Panel only works (for me) if I follow this sequence:

 

1.       Open the UDP BandMap.

2.       On the UDP BandMap menu, click Config -> Show JTDX Control Panel

3.       On the UDP BandMap menu, click Start -> JTDX … and wait for it to launch fully (it needs at least 8 seconds on my system so I have configured it to wait 10 seconds).

 

Now I can click the JTDX Control Panel buttons to change bands or modes: JTDX and the radio change quickly although the JTDX control panel button coloring takes a second or two to catch up.

 

If instead I start JTDX from its desktop icon, the JTDX Control Panel shows Control Panel not connected and doesn’t work.  Also, if I start JTDX before opening the JTDX Control Panel, the control panel looks OK (no red warning) but doesn’t work.

 

73

Gary  ZL2iFB

 

Join hamlogger@groups.io to automatically receive all group messages.