Re: problem with logging QSO's from JTDX


Sean - G4UCJ
 

Hi Bob,
Thanks for the speedy reply. I've got the backup ADIF (used it to make a new log in case the original one had been corrupted), so it's safe to proceed!
All I want to do is to be able to have the log entry from JTDX copy over to Logger as it used to do.

I've looked at the TCP Server window and it shows the following (for the last few things whilst I was testing):
Listening on port: 52001
Connection request ID 4328 from 127.0.0.1
Received: <COMMAND:3>LOG <PARAMETERS:264> <BAND:2>2M <CALL:5>G0CBO <FREQ:10>144.175079 <MODE:3>FT8 <QSO_DATE:8>20200915 <TIME_ON:6>094322 <QSO_DATE_OFF:8>20200915 <TIME_OFF:6>094822 <RST_SENT:3>-15 <RST_RCVD:3>-15 <TX_PWR:17>5W + 5 ELE AT 6M. <GRIDSQUARE:4>JO02 <COMMENT:25>FT8  SENT: -15  RCVD: -15 <EOR>  from 127.0.0.1 [4328]
09:48:31 G0CBO is a duplicate QSO
Sending: NAK : Duplicate QSO to 127.0.0.1 [4328]
Elapsed time 8.9 ms.
 
Elapsed time 7.6 ms.
 
Listening on port: 52001
Connection request ID 3056 from 127.0.0.1
Received: <COMMAND:3>LOG <PARAMETERS:264> <BAND:2>2M <CALL:5>G0JVT <FREQ:10>144.175079 <MODE:3>FT8 <QSO_DATE:8>Listening on port: 52001
Connection request ID 4328 from 127.0.0.1
Received: <COMMAND:3>LOG <PARAMETERS:264> <BAND:2>2M <CALL:5>G0CBO <FREQ:10>144.175079 <MODE:3>FT8 <QSO_DATE:8>20200915 <TIME_ON:6>094322 <QSO_DATE_OFF:8>20200915 <TIME_OFF:6>094822 <RST_SENT:3>-15 <RST_RCVD:3>-15 <TX_PWR:17>5W + 5 ELE AT 6M. <GRIDSQUARE:4>JO02 <COMMENT:25>FT8  SENT: -15  RCVD: -15 <EOR>  from 127.0.0.1 [4328]
09:48:31 G0CBO is a duplicate QSO
Sending: NAK : Duplicate QSO to 127.0.0.1 [4328]
Elapsed time 8.9 ms.
 
Listening on port: 52001
Connection request ID 3332 from 127.0.0.1
Received: <COMMAND:3>LOG <PARAMETERS:264> <BAND:2>2M <CALL:5>G0CBO <FREQ:10>144.175079 <MODE:3>FT8 <QSO_DATE:8>20200914 <TIME_ON:6>093047 <QSO_DATE_OFF:8>20200914 <TIME_OFF:6>093147 <RST_SENT:3>-15 <RST_RCVD:3>-15 <TX_PWR:17>5W + 5 ELE AT 6M. <GRIDSQUARE:4>JO02 <COMMENT:25>FT8  SENT: -15  RCVD: -15 <EOR>  from 127.0.0.1 [3332]
09:49:07 G0CBO is a duplicate QSO
Sending: NAK : Duplicate QSO to 127.0.0.1 [3332]
Elapsed time 7.6 ms.
 
Listening on port: 52001
Connection request ID 3056 from 127.0.0.1
Received: <COMMAND:3>LOG <PARAMETERS:264> <BAND:2>2M <CALL:5>G0JVT <FREQ:10>144.175079 <MODE:3>FT8 <QSO_DATE:8>20200915 <TIME_ON:6>095458 <QSO_DATE_OFF:8>20200915 <TIME_OFF:6>095458 <RST_SENT:3>-15 <RST_RCVD:3>-15 <TX_PWR:17>5W + 5 ELE AT 6M. <GRIDSQUARE:4>JO02 <COMMENT:25>FT8  SENT: -15  RCVD: -15 <EOR>  from 127.0.0.1 [3056]
Listening on port: 52001
Sending: ACK to 127.0.0.1 [3056]
Elapsed time 8211.1 ms.

I notice that for G0CBO, even though the start times (and end times in a couple of cases) are different, the message is saying 'Duplicate QSO' which is odd.

This is under TCP (obviously). When I log a different callsign (in this case, M0IXYTEST1) the original error message shows.

Listening on port: 52001
Connection request ID 4272 from 127.0.0.1
Received: <COMMAND:3>LOG <PARAMETERS:270> <BAND:2>2M <CALL:10>M0IXYTEST1 <FREQ:10>144.175862 <MODE:3>FT8 <QSO_DATE:8>20200915 <TIME_ON:6>143922 <QSO_DATE_OFF:8>20200915 <TIME_OFF:6>143922 <RST_SENT:3>-15 <RST_RCVD:3>-15 <TX_PWR:17>5W + 5 ELE AT 6M. <GRIDSQUARE:4>JO01 <COMMENT:25>FT8  SENT: -15  RCVD: -15 <EOR>  from 127.0.0.1 [4272]
Listening on port: 52001
Sending: ACK to 127.0.0.1 [4272]
Elapsed time 7646.3 ms.

If I try UDP, the QSO disappears - JTDX logs it to its own file but the entry never propagates to Logger. 

Attached are the dupe error message and config screens from JTDX

The PC is an i7 3770, 16GB RAM, Win10 (latest version). The hardware is all OK - I've tested every piece of it :) 

This has really confused me (that is not too difficult though!).

73, Sean

Join hamlogger@groups.io to automatically receive all group messages.