Re: Program loses frequency and a lag on entering callsigns
toggle quoted messageShow quoted text
Dear Ron Hi.
I am using the 7300 as my primary radio with L32 and microKEYER
II and is working fantastic.
[mailto:email@example.com] On Behalf Of ja1nlx
Sent: Saturday, 12 September, 2020 1:03
Subject: Re: [hamlogger] Program loses frequency and a lag on entering
Sample picture is in the IC-7300 section in Logger32 Help.
On 2020/09/12 6:53, Bob wrote:
... and, to make sure your settings are all correct, hopefully
someone with an IC7300 will post a picture of their configuration window. 73.
Ron, my first suggestion is to recommend you use a program that
works for you. But, seeing as many thousands of Logger32 users have no problem
with CAT control (and hundreds using IC7300s), maybe you'd like to do some
experimentation to resolve your problems ...
My SWAG at why the CAT fails periodically is that you have the
polling interval too short. Click SETUP | RADIO | RADIO 1 CONFIGURATION. A
rhetorical question - What is the polling interval? Add 100ms and try that for
a while. If that resolves the problem, reduce it by 25ms. Experiment until you
get a reliable configuration. Other than that, you could open the Radio debug
window (Right click on the RADIO pane on the bottom status bar, then click SHOW
RADIO DEBUG WINDOW. There is a goldmine of information now waiting to be
In regard to your high speed keyboard. You said: typing any call into
the entry window incurs a significant lag. For instance typing GW3YDX takes
four seconds to appear after the G is entered ... Aren't you the lucky one. I tried
it here. I typed G and waited for 10 seconds, but nothing happened. Then I
thought maybe because my call is K4CY I should type K and wait 10 seconds?
Nope, still nothing happens. Maybe you could try to explain your observations
in a way I could attempt to duplicate.
On 09/11/2020 5:28 PM Ron Stone via groups.io <gw3ydx@...>
using L32 version 3.50.422. CAT control is via a IC7300. Correct frequency is
shown in the entry window but often it is sporadically lost and replaced with
0.00, then switches back to the correct frequency. If there is a call in
the entry window it is lost.
typing any call into the entry window incurs a significant lag. For instance
typing GW3YDX takes four seconds to appear after the G is entered. There is
nothing gobbling memory from the PC. Neither of these issues are
RF-related as they both occur during both RX and TX periods. Neither of these
issues occur when I use N1MM+ for contesting. PC is a Windows 7 machine but it
is stable and responsive with all other programs.
issue is only evident in Logger32 and I would dearly love it if someone can
suggest a fix, thanks.
Join firstname.lastname@example.org to automatically receive all group messages.