Aki, I think I found the problem!!

As you probably saw, Jim Altman sent me a link for a program to compare two files, so I downloaded this & entered the two files. It found a few differences in the whole INI file, mostly to do with window positions. But one difference was that the OLD INI file had the Golist auto lookup checked, & the earlier version didn't.
I then opened L32, & checked the auto lookup for Golist, & the program went back to not being able to edit anything in the logbook page. I then unchecked the auto lookup of Golist, & I can edit anything in the logbook page again!! So there is a tie up between the Golist lookup being on or off that is causing this problem.

Once again, many thanks to Aki, & Jim for the help.

73
Ken ZL4NR

On 2/03/2020 11:49 am, ja1nlx wrote:

Ken

As you say it may be better for you to copy/paste older Logger32.ini on current one.

73

On 2020/03/02 7:24, Ken McVie wrote:

JA1NLX,
Sorry for the delay in replying, life got in the way!!!!

I have 63 lines in that section of the INI file, do you mean to delete them all??  If I do this, will it mean I have to reset all those parameters??  I could print out a copy I guess, which would make it easier to "remake" the list bit by bit, testing as I go to see where the problem lies.

In the 'UPDATE' files of L32, I have a INI file dated early February, could I exchange this for my current one & see what happens??

I tried changing the Page Index & the Page Index Column numbers to what you sent me, & that didn't make any difference.

73
Ken ZL4NR

On 28/02/2020 10:09 pm, ja1nlx wrote:

Ken

Delete Logger32.ini.

Rename Logger32.ini.OLD to Logger32.ini again.

Open Logger32.ini with text editor.

Maybe something wrong in [wndLogbookPage Settings] section.

Delete all lines in this section. Run Logger32. How now ?

[wndLogbookPage Settings]
Logbook Page Index= 0
Logbook Page Index Column= 3

73

On 2020/02/28 17:59, Ken McVie wrote:

That works ok. Now how do I find the difference in the two INI files??

73
Ken

On 28/02/2020 9:53 pm, ja1nlx wrote:

Ken

Try with virgin Logger32.ini.

Look for Logger32.ini in the Logger32 folder. Rename it Logger32.ini.OLD.

Run Logger32. Try edit in Logbook page window. How now ?

73

On 2020/02/28 17:44, Ken McVie wrote:

I should add that I have done this lots in the past without trouble.

73
Ken ZL4NR

On 28/02/2020 9:38 pm, ja1nlx wrote:

Ken

What you see when you click any line. I see the line highlighted with Yellow back color.
This color depends on your setting.

73

On 2020/02/28 16:18, Ken McVie wrote:

Using version 3.50.408 on W10 Home desktop computer.

I used to be able to click on a [for instance] name in the logbook alongside a callsign, & change it for something else. Now I can't change anything on a QSO line by clicking on it.

I have a QSO with Rarotonga which shows the IOTA number as OC-124 -- it should be OC- 013 according to the QSL card that I have received, & I can't find a way of changing this.

Is anybody else seeing this behaviour of not being able to edit a line in the logbook??

Any thoughts much appreciated.

73
Ken ZL4NR

--
73 de aki
JA1NLX

--
73 de aki
JA1NLX

--
73 de aki
JA1NLX

--
73 de aki
JA1NLX