Re: Tracking window problem


Dave Colliau
 

Thats easy. The guy that owns vibroplex also sell the easy rotor unit . They work great and are easily installed. I have 2 of them in 2 different Hy-gain/CDE control boxes.

Dave N8DC

On September 5, 2019 at 2:24 PM Jim Altman <jaltman636@...> wrote:

Well, I have a rotor, but no computer control, its an old Ham-IV with the old Ham-IV control box.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Thursday, September 5, 2019 2:13 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Tracking window problem

 

... and no rotor either? 73.

On September 5, 2019 at 2:06 PM Jim Altman <jaltman636@...> wrote:

No, no pointer or wedge.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Thursday, September 5, 2019 2:05 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Tracking window problem

 

Jim, are you saying you have the same problem Pepe has - You see the direction pointer, but no wedge? SeventyThree(s).

On September 5, 2019 at 1:52 PM Jim Altman <jaltman636@...> wrote:

Well, I have done all that, but the wedge never shows up.  Expanded width and opacity. Played with the other settings.  Never shows up.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bob
Sent: Thursday, September 5, 2019 1:23 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Tracking window problem

 

... and the setup of the wedge itself?  Try adjusting the beam width and opacity. SeventyThree(s).

 

On September 5, 2019 at 11:26 AM "Pepe Botella via Groups.Io" <nepo1537@...> wrote:

 

Jim, the marker setup is exactly as you describe. I cannot watch width display wedge

 

73! Pp

 

En jueves, 5 de septiembre de 2019 16:23:18 CEST, Jim Hargrave <w5ifp@...> escribió:

 

 

Pepe,

Did you setup the marker?  Right click on View DX.  

REF: Logger32 Help file  |  Hardware setup |  Rotators  | Setup Antenna Rotator |  Paragraph 6.4

 

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Pepe Botella via Groups.Io
Sent: Thursday, September 5, 2019 6:23 AM
To: hamlogger@groups.io
Subject: [hamlogger] Tracking window problem

 

Hi everyone,

I´ve been using Logger32 since 2013 with Windows 7. No problem.

A few months ago change to Windows 10 and I have a problem with tracking window;

The rotator Works properly when I use the mouse cursor over the rotor panel (Short or Long Path). The rotator move the antenna to the correct direction.

But I can´t watch the red line in the desired bearing except If I put he mouse cursor over the view dx map. Before, with Windows 7 I can watch the red line at all time.

 

My setup:

Yaesu FTDX-5000MP, micro KEYER II, Prositel Rotator  PST-61D

Yaesu CAT control Works thru micro KEYER II to Logger32

Prositel Rotator PST61 is connected to PC Via Serial Port RS232 DB9

 

Any suggestions ( Please find file attached)

73! Pp

 

 


 


 

 

 


 


 

 

 


 


 

 



 


 

Join hamlogger@groups.io to automatically receive all group messages.