Re: Logger 32 and MMTTY

Terry Burkholder <tabn4tb@...>

Many thanks Jim that solves most of the problem.

What it does not do is to set TX Port to COM-TXD (FSK)

Is there a way to make this a default?

Thanks again

Terry N4TB

On 8/7/2014 2:16 PM, Jim Hargrave w5ifp@... [hamlogger] wrote:



Open MMTTY and configure it like you desire.
1) Settings > Radio PTT settings select the Com port and appropriate PTT.
2) Settings > Preset audio frequency ( for Mark 1275, set this to 1360)
3) MMTTY >  Setup set your configuration
4) MODE >   MMTTY engine > Save current profile settings.

Close  the sound card to save the setup. Now MMTTY should open at all the right settings.
This is all in the Help file under Sound card > Communicating with RTTY.

Jim w5ifp@...
On 8/7/2014 8:39 AM, Terry Burkholder tabn4tb@... [hamlogger] wrote:
By using the sound card data window I am able to set up MMTTY to work 
RTTY but each time I open the sound card data window I have to set up 
the com port, FSK and rx frequency -1275.

I have tried creating a MMTTY profile but it does not save the com port 
or FSK setting.

Is there a way to set up the sound card window so I do not have to enter 
this data each time I work RTTY?


Terry N4TB

Posted by: Terry Burkholder 

Visit these sites for Logger and other downloads: 


Yahoo Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo Groups is subject to:

Join to automatically receive all group messages.