Date   

Re: Gingery shaper patterns available

Drag
 

If I might suggest, tightly pack all of the wooden pieces in a paper grocery bag that is laying on its face... Then wrap the bag and tape it shut... Put the paper in an envelope, and add that on top of the bag... This will give you the smallest possible size for your box without adding much to the weight.

Drag


Re: Gingery shaper patterns available

John Dammeyer
 

Sure. 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 8:38 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

I can definitely fit them in one box after looking at them.  And it'll be way smaller than 32".  How about if I repack them in a smaller box for shipping and then get an actual quote. 

 

On Wed, Jun 9, 2021, 9:51 PM John Dammeyer <johnd@...> wrote:

To expand on this.  If I was sending a 32" x 16" x 8" 14 lb box to Texas this is what I'd have to pay not including any duty and taxes and that's the lowest. With that sort of cost I think it will be better if it goes somewhere more local.

 

Thanks for offering them.

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of John Dammeyer
Sent: June-09-21 6:54 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

You said it would require two boxes. I know it's a pain to ship it across the border so if that is too much trouble and someone else has a foundry and wants them I would step aside.  

 

Otherwise let's find out what shipping them will cost. 

John. 

 

 

 

Sent from my Samsung S10

 

 

-------- Original message --------

From: Nick Andrews <nickjandrews@...>

Date: 2021-06-09 6:22 p.m. (GMT-08:00)

Subject: Re: [gingery-machines] Gingery shaper patterns available

 

In this box,  it's 13lb3oz.  Without the paper,  it's about 9lb 12oz.  I'd use a smaller box but add bubble wrap for protection. 

 

On Wed, Jun 9, 2021, 8:07 PM John Dammeyer <johnd@...> wrote:

I guess we have to weigh [SIC] the costs of disposal and reprinting verses shipping costs.  How about a weight of the whole works and then without the paper.  Shame to throw out all the paper.  Or the round blank.

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 5:56 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

Well they're yours if you want them. I promised Rick I'd pass them along and as I no longer need them...  They look to be in great condition. 

 

I can put them in a box and weigh it to calculate shipping costs.  The printed stuff is about a full ream worth of paper so if I toss that it'll save you some moola.  I could also leave out the large round wheel/pulley blank that should be very easy to make to shave weight more. 

 

On Wed, Jun 9, 2021, 3:10 PM John Dammeyer <johnd@...> wrote:

I have a folder with all his changes that he documented.  But I guess it depends on shipping.  If it costs more than paint, filler and the wood then I'd probably make my own.  

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Bill in OKC too via groups.io
Sent: June-09-21 12:58 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)

On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

Nick Andrews
 

I can definitely fit them in one box after looking at them.  And it'll be way smaller than 32".  How about if I repack them in a smaller box for shipping and then get an actual quote. 


On Wed, Jun 9, 2021, 9:51 PM John Dammeyer <johnd@...> wrote:

To expand on this.  If I was sending a 32" x 16" x 8" 14 lb box to Texas this is what I'd have to pay not including any duty and taxes and that's the lowest. With that sort of cost I think it will be better if it goes somewhere more local.

 

Thanks for offering them.

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of John Dammeyer
Sent: June-09-21 6:54 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

You said it would require two boxes. I know it's a pain to ship it across the border so if that is too much trouble and someone else has a foundry and wants them I would step aside.  

 

Otherwise let's find out what shipping them will cost. 

John. 

 

 

 

Sent from my Samsung S10

 

 

-------- Original message --------

From: Nick Andrews <nickjandrews@...>

Date: 2021-06-09 6:22 p.m. (GMT-08:00)

Subject: Re: [gingery-machines] Gingery shaper patterns available

 

In this box,  it's 13lb3oz.  Without the paper,  it's about 9lb 12oz.  I'd use a smaller box but add bubble wrap for protection. 

 

On Wed, Jun 9, 2021, 8:07 PM John Dammeyer <johnd@...> wrote:

I guess we have to weigh [SIC] the costs of disposal and reprinting verses shipping costs.  How about a weight of the whole works and then without the paper.  Shame to throw out all the paper.  Or the round blank.

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 5:56 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

Well they're yours if you want them. I promised Rick I'd pass them along and as I no longer need them...  They look to be in great condition. 

 

I can put them in a box and weigh it to calculate shipping costs.  The printed stuff is about a full ream worth of paper so if I toss that it'll save you some moola.  I could also leave out the large round wheel/pulley blank that should be very easy to make to shave weight more. 

 

On Wed, Jun 9, 2021, 3:10 PM John Dammeyer <johnd@...> wrote:

I have a folder with all his changes that he documented.  But I guess it depends on shipping.  If it costs more than paint, filler and the wood then I'd probably make my own.  

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Bill in OKC too via groups.io
Sent: June-09-21 12:58 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)

On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

John Dammeyer
 

To expand on this.  If I was sending a 32" x 16" x 8" 14 lb box to Texas this is what I'd have to pay not including any duty and taxes and that's the lowest. With that sort of cost I think it will be better if it goes somewhere more local.

 

Thanks for offering them.

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of John Dammeyer
Sent: June-09-21 6:54 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

You said it would require two boxes. I know it's a pain to ship it across the border so if that is too much trouble and someone else has a foundry and wants them I would step aside.  

 

Otherwise let's find out what shipping them will cost. 

John. 

 

 

 

Sent from my Samsung S10

 

 

-------- Original message --------

From: Nick Andrews <nickjandrews@...>

Date: 2021-06-09 6:22 p.m. (GMT-08:00)

Subject: Re: [gingery-machines] Gingery shaper patterns available

 

In this box,  it's 13lb3oz.  Without the paper,  it's about 9lb 12oz.  I'd use a smaller box but add bubble wrap for protection. 

 

On Wed, Jun 9, 2021, 8:07 PM John Dammeyer <johnd@...> wrote:

I guess we have to weigh [SIC] the costs of disposal and reprinting verses shipping costs.  How about a weight of the whole works and then without the paper.  Shame to throw out all the paper.  Or the round blank.

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 5:56 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

Well they're yours if you want them. I promised Rick I'd pass them along and as I no longer need them...  They look to be in great condition. 

 

I can put them in a box and weigh it to calculate shipping costs.  The printed stuff is about a full ream worth of paper so if I toss that it'll save you some moola.  I could also leave out the large round wheel/pulley blank that should be very easy to make to shave weight more. 

 

On Wed, Jun 9, 2021, 3:10 PM John Dammeyer <johnd@...> wrote:

I have a folder with all his changes that he documented.  But I guess it depends on shipping.  If it costs more than paint, filler and the wood then I'd probably make my own.  

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Bill in OKC too via groups.io
Sent: June-09-21 12:58 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)

On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

John Dammeyer
 

You said it would require two boxes. I know it's a pain to ship it across the border so if that is too much trouble and someone else has a foundry and wants them I would step aside.  

Otherwise let's find out what shipping them will cost. 
John. 



Sent from my Samsung S10


-------- Original message --------
From: Nick Andrews <nickjandrews@...>
Date: 2021-06-09 6:22 p.m. (GMT-08:00)
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

In this box,  it's 13lb3oz.  Without the paper,  it's about 9lb 12oz.  I'd use a smaller box but add bubble wrap for protection. 

On Wed, Jun 9, 2021, 8:07 PM John Dammeyer <johnd@...> wrote:

I guess we have to weigh [SIC] the costs of disposal and reprinting verses shipping costs.  How about a weight of the whole works and then without the paper.  Shame to throw out all the paper.  Or the round blank.

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 5:56 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

Well they're yours if you want them. I promised Rick I'd pass them along and as I no longer need them...  They look to be in great condition. 

 

I can put them in a box and weigh it to calculate shipping costs.  The printed stuff is about a full ream worth of paper so if I toss that it'll save you some moola.  I could also leave out the large round wheel/pulley blank that should be very easy to make to shave weight more. 

 

On Wed, Jun 9, 2021, 3:10 PM John Dammeyer <johnd@...> wrote:

I have a folder with all his changes that he documented.  But I guess it depends on shipping.  If it costs more than paint, filler and the wood then I'd probably make my own.  

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Bill in OKC too via groups.io
Sent: June-09-21 12:58 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)


On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

Nick Andrews
 

In this box,  it's 13lb3oz.  Without the paper,  it's about 9lb 12oz.  I'd use a smaller box but add bubble wrap for protection. 


On Wed, Jun 9, 2021, 8:07 PM John Dammeyer <johnd@...> wrote:

I guess we have to weigh [SIC] the costs of disposal and reprinting verses shipping costs.  How about a weight of the whole works and then without the paper.  Shame to throw out all the paper.  Or the round blank.

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 5:56 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

Well they're yours if you want them. I promised Rick I'd pass them along and as I no longer need them...  They look to be in great condition. 

 

I can put them in a box and weigh it to calculate shipping costs.  The printed stuff is about a full ream worth of paper so if I toss that it'll save you some moola.  I could also leave out the large round wheel/pulley blank that should be very easy to make to shave weight more. 

 

On Wed, Jun 9, 2021, 3:10 PM John Dammeyer <johnd@...> wrote:

I have a folder with all his changes that he documented.  But I guess it depends on shipping.  If it costs more than paint, filler and the wood then I'd probably make my own.  

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Bill in OKC too via groups.io
Sent: June-09-21 12:58 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)


On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

John Dammeyer
 

I guess we have to weigh [SIC] the costs of disposal and reprinting verses shipping costs.  How about a weight of the whole works and then without the paper.  Shame to throw out all the paper.  Or the round blank.

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 5:56 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

Well they're yours if you want them. I promised Rick I'd pass them along and as I no longer need them...  They look to be in great condition. 

 

I can put them in a box and weigh it to calculate shipping costs.  The printed stuff is about a full ream worth of paper so if I toss that it'll save you some moola.  I could also leave out the large round wheel/pulley blank that should be very easy to make to shave weight more. 

 

On Wed, Jun 9, 2021, 3:10 PM John Dammeyer <johnd@...> wrote:

I have a folder with all his changes that he documented.  But I guess it depends on shipping.  If it costs more than paint, filler and the wood then I'd probably make my own.  

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Bill in OKC too via groups.io
Sent: June-09-21 12:58 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)


On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

Nick Andrews
 

Well they're yours if you want them. I promised Rick I'd pass them along and as I no longer need them...  They look to be in great condition. 

I can put them in a box and weigh it to calculate shipping costs.  The printed stuff is about a full ream worth of paper so if I toss that it'll save you some moola.  I could also leave out the large round wheel/pulley blank that should be very easy to make to shave weight more. 

On Wed, Jun 9, 2021, 3:10 PM John Dammeyer <johnd@...> wrote:

I have a folder with all his changes that he documented.  But I guess it depends on shipping.  If it costs more than paint, filler and the wood then I'd probably make my own.  

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Bill in OKC too via groups.io
Sent: June-09-21 12:58 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)



On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

John Dammeyer
 

I have a folder with all his changes that he documented.  But I guess it depends on shipping.  If it costs more than paint, filler and the wood then I'd probably make my own.  

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Bill in OKC too via groups.io
Sent: June-09-21 12:58 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)



On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

Bill in OKC too
 

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)




On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:


I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

John Dammeyer
 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Gingery shaper patterns available

Nick Andrews
 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


SB 9" lathe for sale

Nick Andrews
 

My brother has two SB lathes.  He is keeping the 13" and selling the 9".  I think it's a W model,  made for a bench top.  It's in Prescott Valley,  AZ.  He has an engine host for loading.  Said he's thinking about cleaning and painting it or selling as-is.  Not sure what all tooling goes with it,  but he has some different stuff. 


Re: CAD Software Recomendations?

JOHN DOUCET
 

One of the perks of being a member of the Experimental Aircraft Association www.eaa.org is a free student license for Solidworks.  If I remember right, it's about $40 a year for the membership.

John

On Mon, May 31, 2021, 11:03 dk54321 via groups.io <dk54321=yahoo.com@groups.io> wrote:
I'm taking a class in SolidWorks, so I have a SolidWorks license through the school. I'm looking for a CAD program for cheap or free, with a reasonable learning curve for users familiar with SolidWorks, preferably one that will run on older computers. 


Re: CAD Software Recomendations?

John Dammeyer
 

I forgot there is also Alibre Atom which is the low cost hobby version.

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Ethan Allred
Sent: May-31-21 1:34 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] CAD Software Recomendations?

 

Solidworks is planning on having a low-cost subscription version released this year with most of the standard features, targeted towards makers and the like. I'd recommend either that or just Fusion360 on a free license.

 

On Mon, May 31, 2021, 13:19 John Dammeyer <johnd@...> wrote:

If you aren't running Linux and it's a hobby then Fusion360 which is web based is free and very very good.

 

If you are using it for work-work and need a few extra features AlibreCAD starts to be the lowest cost entry point. 

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of dk54321 via groups.io
Sent: May-31-21 11:03 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] CAD Software Recomendations?

 

I'm taking a class in SolidWorks, so I have a SolidWorks license through the school. I'm looking for a CAD program for cheap or free, with a reasonable learning curve for users familiar with SolidWorks, preferably one that will run on older computers. 


Re: CAD Software Recomendations?

Ethan Allred
 

Solidworks is planning on having a low-cost subscription version released this year with most of the standard features, targeted towards makers and the like. I'd recommend either that or just Fusion360 on a free license.


On Mon, May 31, 2021, 13:19 John Dammeyer <johnd@...> wrote:

If you aren't running Linux and it's a hobby then Fusion360 which is web based is free and very very good.

 

If you are using it for work-work and need a few extra features AlibreCAD starts to be the lowest cost entry point. 

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of dk54321 via groups.io
Sent: May-31-21 11:03 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] CAD Software Recomendations?

 

I'm taking a class in SolidWorks, so I have a SolidWorks license through the school. I'm looking for a CAD program for cheap or free, with a reasonable learning curve for users familiar with SolidWorks, preferably one that will run on older computers. 


Re: CAD Software Recomendations?

John Dammeyer
 

If you aren't running Linux and it's a hobby then Fusion360 which is web based is free and very very good.

 

If you are using it for work-work and need a few extra features AlibreCAD starts to be the lowest cost entry point. 

 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of dk54321 via groups.io
Sent: May-31-21 11:03 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] CAD Software Recomendations?

 

I'm taking a class in SolidWorks, so I have a SolidWorks license through the school. I'm looking for a CAD program for cheap or free, with a reasonable learning curve for users familiar with SolidWorks, preferably one that will run on older computers. 


CAD Software Recomendations?

dk54321@...
 

I'm taking a class in SolidWorks, so I have a SolidWorks license through the school. I'm looking for a CAD program for cheap or free, with a reasonable learning curve for users familiar with SolidWorks, preferably one that will run on older computers. 


Machine finishes

Nick Andrews
 

So I ordered these 5/8" shank carbide lathe bits,  not thinking that my holders only handle up to 1/2".  A box of ten was cheap.  Decided to trim a couple down to fit.  Guess what machine cut each one. Both finishes are really good by fingertip test. 


Re: Case Hardening the Permanent Spindle #lathe

dgortonii@...
 

That's an excellent feature to include where grub screws are utilized. To take it one small step forward, my old ShopSmith uses that design on their spindle, which runs all of the tools for it's multi-function design. They not only include a flat on the spindle, but the put an angle into to, sloping down and away from the end of the spindle.  This makes any forces trying to pull the tool off the spindle have to overcome not only the friction of the grub screw, but also the angle of the flat acting as a wedge against the grub screw.   

81 - 100 of 180