Date   

Re: Check out my new taper attachment

chris eigenheer
 

That is ingenious. Never thought of that

Chris

Sent from my Bell Samsung device over Canada’s largest network.


From: gingery-machines@groups.io <gingery-machines@groups.io> on behalf of Nick Andrews <nickjandrews@...>
Sent: Wednesday, October 20, 2021 9:21:55 PM
To: sheldonlathe@groups.io <sheldonlathe@groups.io>; gingery-machines@groups.io <gingery-machines@groups.io>
Subject: [gingery-machines] Check out my new taper attachment
 
A whopping $42.22 with tax.  Still need a small live center with a 1/2" shank to go in it though. 


Check out my new taper attachment

Nick Andrews
 

A whopping $42.22 with tax.  Still need a small live center with a 1/2" shank to go in it though. 


Re: machinery auction in Tulsa Oct 28

Bill in OKC too
 

I am afraid I'm stuck here. Seem to have finally found a good doc for my wife, and besides, if we move, she wants to move to Destin, Florida, or at least in that area. I could get behind that! Only I'd have to win the lottery, and that is hard to do when you don't buy tickets. ;)

I'm sitting here on the computer when I should be in the shop. Been tearing down the Smithy CB-1220XL 3-in-1 machine my brother bought and made me take. Literally! He brought it down from Grand Junction, where he's been living for the past several decades, and helped me move it into the house early this year. Guy he got it from got talked into buying it, and started unpacking it, then got distracted and never got back to it. In 1997. He'd started cleaning off the cosmoline, but didn't finish, and all that crud has dried up. Got the back half of the lathe spindle disassembled, and that was apparently where the crunchiness in the spindle was, since it now turns freely. I still need to get the rest of it out, and cleaned up. Also need to replace the power switch assembly. The Fwd/Rev switch got mangled a bit, and you had to be a bit heavy-handed to get it to switch from forward to reverse, Then I'm probably going to have to do the same thing for the milling spindle, at least cleaning it.

Got the Atlas and the HF lathes, and my 12" bandsaw running, all within the past couple of weeks. Still don't have much benchtop space, but I can get to all the machines. Started re-making the spindle for my Lewis Shaper again last night in class. I'd kind of like to do it on the Smithy just to see how much of a nuisance the all in one thing is. Got a bunch of little projects about to start up right now, and need the shop in shape.

I didn't see a self-centering milling vise or a shaper vise in that lot, or I'd be really tempted to burn some credit card on those folks. But I better be good for now. Bought about $200 of tools and shop stuff and metal yesterday. That doesn't count as being good. ;)

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)




On Wednesday, October 13, 2021, 02:16:22 PM CDT, Nick Andrews <nickjandrews@...> wrote:


Hell, I was thinking specifically of you when I posted it!  They have to have a ton of smaller stuff there.  The property would be great for someone living in the area although I'd prefer a LOT more land.

On Wed, Oct 13, 2021 at 1:59 PM Bill in OKC too via groups.io <wmrmeyers=yahoo.com@groups.io> wrote:
You RAT! Most of that stuff is too big for my shop, and even at the $5 opening bid, a bit too much for my wallet this month, darn it!

this is what I get for making the life choices I made back when it was the only logical thing to do... :)

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)





Re: machinery auction in Tulsa Oct 28

Nick Andrews
 

Looking at the lots now, they have a bunch of machine vises listed individually instead of grouped together which is great for real bidders vs resellers.  Some bigger lots of tooling, some drills that none of us would ever have use for and some other smaller lots that might go cheap.  But the descriptions are weak and most cabinets look pretty old and rusty.  If I lived closer to go inspect...

On Wed, Oct 13, 2021 at 1:59 PM Bill in OKC too via groups.io <wmrmeyers=yahoo.com@groups.io> wrote:
You RAT! Most of that stuff is too big for my shop, and even at the $5 opening bid, a bit too much for my wallet this month, darn it!

this is what I get for making the life choices I made back when it was the only logical thing to do... :)

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)





Re: machinery auction in Tulsa Oct 28

Nick Andrews
 

Hell, I was thinking specifically of you when I posted it!  They have to have a ton of smaller stuff there.  The property would be great for someone living in the area although I'd prefer a LOT more land.

On Wed, Oct 13, 2021 at 1:59 PM Bill in OKC too via groups.io <wmrmeyers=yahoo.com@groups.io> wrote:
You RAT! Most of that stuff is too big for my shop, and even at the $5 opening bid, a bit too much for my wallet this month, darn it!

this is what I get for making the life choices I made back when it was the only logical thing to do... :)

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)





Re: machinery auction in Tulsa Oct 28

Bill in OKC too
 

You RAT! Most of that stuff is too big for my shop, and even at the $5 opening bid, a bit too much for my wallet this month, darn it!

this is what I get for making the life choices I made back when it was the only logical thing to do... :)

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)





machinery auction in Tulsa Oct 28

Nick Andrews
 


Re: building the Gingery dividing head

Thomas Janstrom
 

yeah, and accounting for wear over the past 20 odd years is hard too. The carriage and cross slide/compound need work, I might end up hogging them out now that I have a mill.

https://youtu.be/dGg8vIseXoE part 8 mostly milling parts as I'm waiting on bushings to arrive in the mail


Re: building the Gingery dividing head

Nick Andrews
 

Very cool!  Really drives home the discussions regarding the importance of rigidity and close tolerances on all surfaces, locking unneeded moving parts, etc.

On Wed, Jul 21, 2021 at 4:16 PM Thomas Janstrom <thomas@...> wrote:
Making some progress on machining the castings... And the worm and wheel finally arrived, I wish I could have sourced these locally but ended up having to have them shipped from the USA at a greater cost then the parts. 

https://youtu.be/GTo-0JrH580


Re: building the Gingery dividing head

Nick Andrews
 

Nice!  I've considered making one too.  Like Bill, I ended up buying a lathe, vertical mill, and shaper.  But I am thinking about building the horizontal mill and maybe dividing head.  I have invested in a set of ER40 collets and tool holders to use with my mill and was looking for an ER40 spin indexer but there don't seem to be any.  5C indexers are pretty cheap-ish on ebay, but I would have to buy a 5C-ER40 adapter to use one.  And then that could be used in the Sheldon lathe, with an adapter.  And a tailstock to be used with either the spin index or dividing head could be used on the mill table and possibly the shaper too

On Thu, Jul 8, 2021 at 8:39 PM Thomas Janstrom <thomas@...> wrote:
So I bit the bullet and decided buying a dividing head was not an option, all I could find were too big for my machines or too small for the project or just plain junk... Anyway here's where I'm at as I now await parts to arrive.

https://youtu.be/j70RzznlqEU Sand casting parts for Gingery dividing head


Re: building the Gingery dividing head

Bill in OKC too
 

Left you a comment, and a thumb up. I envy your shop! And it's going to be much better!

I've sent you an invite to join the Metal-Shapers-and-Planers group at groups.io. We don't have cookies, unfortunately, but we do have a manual for your shaper.

I sort of bypassed the building of gingery machines to buy ready-built or restorable machines, but I'm seriously looking at building the dividing head you're doing. I figured with the skill level I had at machining and making stuff I'd never have a shop if I did it the Gingery way. I'm far enough along in that process now that I can see my way to doing some of those things here in the near future, so I don't completely lose out of the learning involved.

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)

On Thursday, September 16, 2021, 05:55:39 AM CDT, Thomas Janstrom <thomas@...> wrote:


Look for the video called "Things are starting to shape up"... This will be one heck of a project as you will see.


Re: building the Gingery dividing head

Thomas Janstrom
 

Look for the video called "Things are starting to shape up"... This will be one heck of a project as you will see.


Re: building the Gingery dividing head

Bill in OKC too
 

Braggart! ;)

I was going to go back to sleep, but now I have to watch your video. Two subjects dear to my heart in one video.

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)

A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)

On Wednesday, September 15, 2021, 06:16:35 AM CDT, Thomas Janstrom <thomas@moiler.com> wrote:





Part 7: https://youtu.be/p1yLskAKI4A

Had some interesting things crop up that needed doing, like picking up an 18" stroke shaper...


Re: building the Gingery dividing head

Thomas Janstrom
 

Part 7: https://youtu.be/p1yLskAKI4A

Had some interesting things crop up that needed doing, like picking up an 18" stroke shaper...


Re: Gingery shaper patterns available

Bill in OKC too
 

Friends and Family still works on Paypal. I've recently (this past week) bought a couple of faceplates, and a MLA SB T-slotted table and paid that way.

One through the SB9 lathe group, and one through my cast boolits group.

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)

A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)

On Saturday, September 4, 2021, 11:36:41 PM CDT, Nick Andrews <nickjandrews@gmail.com> wrote:





That works if they still do the "send to friends and family" option.  Since they are going that far,  I might slide in a piece of Masonite or something on flat sides versus bubble wrap.   Better protection.   Let me see what I can find.
I thought briefly about trying to cast a couple sets of the parts and build it even though I have the Logan just for the experience,  but I have way too many projects as it is. And now the 3 jaw is stuck on my 11" Sheldon again.   Time to cut a wedge and tap it loose.  Then I can trim the back plate for the 4 jaw and get to cleaning up a 1903 receiver since I got the old plugged barrel out.  And a casting for one that needs to be machined and heat treated too.
Could've given the Gingery shaper to my brother in Arizona but he's got a little one car garage that's packed,  especially until he sells his smaller South Bend 9".
I'll try to get it packed up and sent on Tuesday if I can but I'm flying to Columbia,  MO that day for a site visit at the VA on a big network upgrade we're designing. Will be there the 7-10.  Anything interesting there besides the hotel bar and Mizzou college girls?
On Sat, Sep 4, 2021, 9:35 PM John Dammeyer <johnd@autoartisans.com> wrote:


OK.  How would you like to be paid?  I can send Paypal to your email address.

John





From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: September-04-21 6:46 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available



Okay,  I finally got the right box,  and they do all fit in one USPS flat rate game box, with the paper printouts and room for a bit of bubble wrap around and between them.  International to Canada is $72.  Shipping in USA is about $24.  Sorry it took so long,  but work is busy and it's hot here!  Was 108 in the shop today.



On Wed, Jun 9, 2021, 2:57 PM Bill in OKC too via groups.io <wmrmeyers=yahoo.com@groups.io> wrote:

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)





On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@autoartisans.com> wrote:





I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer





From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available



If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

John Dammeyer
 

No rush.  Do it when you get back if you can't find the time on Tuesday.

Thank you. 

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: September-04-21 9:36 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

That works if they still do the "send to friends and family" option.  Since they are going that far,  I might slide in a piece of Masonite or something on flat sides versus bubble wrap.   Better protection.   Let me see what I can find. 

 

I thought briefly about trying to cast a couple sets of the parts and build it even though I have the Logan just for the experience,  but I have way too many projects as it is. And now the 3 jaw is stuck on my 11" Sheldon again.   Time to cut a wedge and tap it loose.  Then I can trim the back plate for the 4 jaw and get to cleaning up a 1903 receiver since I got the old plugged barrel out.  And a casting for one that needs to be machined and heat treated too.

 

Could've given the Gingery shaper to my brother in Arizona but he's got a little one car garage that's packed,  especially until he sells his smaller South Bend 9".

 

I'll try to get it packed up and sent on Tuesday if I can but I'm flying to Columbia,  MO that day for a site visit at the VA on a big network upgrade we're designing. Will be there the 7-10.  Anything interesting there besides the hotel bar and Mizzou college girls? 

 

On Sat, Sep 4, 2021, 9:35 PM John Dammeyer <johnd@...> wrote:

OK.  How would you like to be paid?  I can send Paypal to your email address.

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: September-04-21 6:46 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

Okay,  I finally got the right box,  and they do all fit in one USPS flat rate game box, with the paper printouts and room for a bit of bubble wrap around and between them.  International to Canada is $72.  Shipping in USA is about $24.  Sorry it took so long,  but work is busy and it's hot here!  Was 108 in the shop today. 

 

On Wed, Jun 9, 2021, 2:57 PM Bill in OKC too via groups.io <wmrmeyers=yahoo.com@groups.io> wrote:

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)


On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

Nick Andrews
 

That works if they still do the "send to friends and family" option.  Since they are going that far,  I might slide in a piece of Masonite or something on flat sides versus bubble wrap.   Better protection.   Let me see what I can find. 

I thought briefly about trying to cast a couple sets of the parts and build it even though I have the Logan just for the experience,  but I have way too many projects as it is. And now the 3 jaw is stuck on my 11" Sheldon again.   Time to cut a wedge and tap it loose.  Then I can trim the back plate for the 4 jaw and get to cleaning up a 1903 receiver since I got the old plugged barrel out.  And a casting for one that needs to be machined and heat treated too.

Could've given the Gingery shaper to my brother in Arizona but he's got a little one car garage that's packed,  especially until he sells his smaller South Bend 9".

I'll try to get it packed up and sent on Tuesday if I can but I'm flying to Columbia,  MO that day for a site visit at the VA on a big network upgrade we're designing. Will be there the 7-10.  Anything interesting there besides the hotel bar and Mizzou college girls? 

On Sat, Sep 4, 2021, 9:35 PM John Dammeyer <johnd@...> wrote:

OK.  How would you like to be paid?  I can send Paypal to your email address.

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: September-04-21 6:46 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

Okay,  I finally got the right box,  and they do all fit in one USPS flat rate game box, with the paper printouts and room for a bit of bubble wrap around and between them.  International to Canada is $72.  Shipping in USA is about $24.  Sorry it took so long,  but work is busy and it's hot here!  Was 108 in the shop today. 

 

On Wed, Jun 9, 2021, 2:57 PM Bill in OKC too via groups.io <wmrmeyers=yahoo.com@groups.io> wrote:

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)



On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.


Re: Gingery shaper patterns available

John Dammeyer
 

Once I cast all the bits and pieces and make any new or repair, I'll forward them on to whoever wants them.

Lately pattern making has become really easy. I use AlibreCAD to model the parts and even create the 2D drawings. I then suppress the various holes and slots and scale it by 1.06 for aluminium shrinkage and add draft to the extrusions.

Then export as STL and use Repetier to create the gcode for the 3D printer. Off to Octoprint and then it's time for some sanding, scraping, priming, fille, primer and paint.

I'm currently building a power drawbar for the mill. Depending on what I'm doing I use either the Gingery Lathe or the South Bend for the bigger parts.

None of this would have been possible had I not discovered the Gingery books and built the Gas Fired Foundry, Power Hacksaw, Slip Roll and the Lathe. And had it not been for the Gingery Lathe I'd never have designed and built my Electronic Lead Screw which I use all the time for turning and especially boring to depth. But most of all, on the old imperial South Bend, metric threads.

So Thanks Dave Gingery. My hobby of machining and casting wouldn't exist if it wasn't for him.

With CNC on the mill I'm not even sure if I need a shaper all that badly. Not even sure where I'll put it. But I know by building it I will learn a whole bunch more. I hope so. Seems I still make things 3 times when I use CNC but slowly I'm getting better. The shaper is an ideal project for this.

Attached are photos of the current project using the first try at 3D printed parts. The second is the improved parts turned into patterns. It's raining now and is supposed to on Sunday. That means it won't be so dangerously dry out and I can take a stab at some casting.

John Dammeyer

-----Original Message-----
From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Terry Coombs
Sent: September-04-21 7:53 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

On 9/4/2021 9:13 PM, Bill in OKC too via groups.io wrote:
I think it would be better to send it to John, but if he can't do it, I'll take them. Once they get here, they may never be seen again...

Bill in OKC
Oh I don't know about that Bill ... you ain't all that far from Stone
County Arkansas and I still want to build a shaper . But I'm too lazy to
build the rest of the patterns . <I've got some of the patterns here
somewhere I think>
--
Snag
Race only matters to racists ...




Re: Gingery shaper patterns available

Terry Coombs
 

On 9/4/2021 9:13 PM, Bill in OKC too via groups.io wrote:
I think it would be better to send it to John, but if he can't do it, I'll take them. Once they get here, they may never be seen again...
Bill in OKC
Oh I don't know about that Bill ... you ain't all that far from Stone County Arkansas and I still want to build a shaper . But I'm too lazy to build the rest of the patterns . <I've got some of the patterns here somewhere I think>
--
Snag
Race only matters to racists ...


Re: Gingery shaper patterns available

John Dammeyer
 

OK.  How would you like to be paid?  I can send Paypal to your email address.

John

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: September-04-21 6:46 PM
To: gingery-machines@groups.io
Subject: Re: [gingery-machines] Gingery shaper patterns available

 

Okay,  I finally got the right box,  and they do all fit in one USPS flat rate game box, with the paper printouts and room for a bit of bubble wrap around and between them.  International to Canada is $72.  Shipping in USA is about $24.  Sorry it took so long,  but work is busy and it's hot here!  Was 108 in the shop today. 

 

On Wed, Jun 9, 2021, 2:57 PM Bill in OKC too via groups.io <wmrmeyers=yahoo.com@groups.io> wrote:

I was going to volunteer to take them if no-one else did, but I think your place would be a better home!

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)


A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)



On Wednesday, June 9, 2021, 02:52:50 PM CDT, John Dammeyer <johnd@...> wrote:

 

 

I'd be interested.  Shipping to Canada, Victoria, BC. V8Z 5P8

John Dammeyer

 

 

From: gingery-machines@groups.io [mailto:gingery-machines@groups.io] On Behalf Of Nick Andrews
Sent: June-09-21 10:45 AM
To: gingery-machines@groups.io
Subject: [gingery-machines] Gingery shaper patterns available

 

If anyone is interested in paying shipping, I have Rick Sparber's patterns used for casting parts to make the Gingery shaper.  I think I also printed out all of his modifications to the original design, all of which were improvements.  Not crazy heavy either.  Too much stuff to fit in one flat rate box though.Shipping from San Antonio, TX.

1 - 20 of 140