Using cw mode, I wondered why I have to turn on bk-in after changing bands. There has to be something I am missing in settings? surely if I work cw and only cw and not in a band other than cw, the bk-

Hi to all, Are there any settings im missing? For the TX FM it's awful sounding cut at 300hz It's like talking into a pipe, horrid sounding. I use FM on 70mhz talking to locals they have all commented

Has anyone ever tried to run the Yaesu official software with the Parallels windows emulator to run on the Apple Air with the M1 or M2 processor and got it working ?

I don't see in the manual where the FTdx10 has an A=B mode for split to make both VFO A and VFO B on the same frequency. Is this missing from the radio? 73, Joe KB4N

Has anyone successfully paired an FTDX10 with a Palstar "AT-Auto" tuner. This is not the current Palstar "HF-Auto" but the 2006-2010 vintage AT-Auto model produced by Palstar and designed, and later s

Microham USB device router 9.3.5 does not have FTDX10 as a selection for the radio. Which of radios included in the drop-down do I select? 73, Darius VE3BR

Hello all Have been using the record function on my ftdx10 on both CW and SSB. On both modes it only revords the Rx part of the qso. The time when I am Tx is just quiet...no matter what I try. Is ther

Greetings. My new-ish (around a month) has begun starting up with a blank screen. It can take several power cycles to get it to start up correctly. The power supply is an Alinco DM-330MVE which appear

As per the manual, the recording function is limited to the received audio only. See P. 51 of the FTDX10 Owners Manual There is no discussion regarding the recording of transmitted audio. Ken, N2VIP

I thought I saw a post here for a Service Manual but I can't find it now. Is there a more technical manual than the Owner's/Operator's manual?

Tnx to the 2 hams ( *N1RBD & N2VIP* ) who helped me get my sub request approved. Hams are great at helping other hams! I had picked these guys at random from the message list. They were both very help

Hi again. Another problem with my new-ish FTDX-10. Recently I have been seeing the following artifact (blips) in the waterfall. It's not the whole screen, just the waterfall. It's always on the same p

I know someone who has applied for membership but has not been approved yet. Can an admin look at the pending registrations? w****j@... Thanks!

If I don't find an adapter cable (CC-1-YM) I need to connect a HM-10-5 to a Yaesu FTDX10 with the MFJ-1263. Does anyone know how to set the MFJ-1263 jumpers to convert a round Yaesu DIN on the HM-10-5

I found this book helpful when I got my rig. I have an extra copy (new). $5 (for postage) to the first who asks. Email me if interested. Email good on QRZ. Howard K4LXY

DIRECT. TOM, All the groups.io mailing list I subscribe to have the group name a part of the subject line, as did [ftdx-10] until recently. I use the group name in the subject line to sort my emails i

Since a few days the group identifier no more is attached to the subjects in the mails from this group. Without the [ftdx-10] in the subject mail filters are very dificult to set. This is very incomfo

Does anyone have a Heil CC-1-YM for Heil HM-10 Mic to FTDX10, that they are willing to sell? W4NDK, Nate

If you use a RX only antenna you will not be able to transmit and won’t need the CTRL cable. 🤷‍♂️ -- Trent, KN4TAK

I'm a relatively new owner of an FT-DX10. I upgraded from an Icom IC-7300. The internal tuner in the IC-7300 remembered the tuning parameters, so I pretty much needed to tune one time, then I never ha