Date   

Re: Add GRO Source

Alan Hourd
 


That reminds me that I started entering GRO records into one Source, many (20?) years ago, rather than 3 separate sources. Then, much later, it occurred to me that the approach was untidy and started using three sources for GRO births, marriages and deaths. I have never attempted to extract the references from the "bulk" GRO Source to move them into the separate sources.  Is there a simple way to do that - or would I have to move details one by one from the bulk to separate sources?

Alan Hourd


  

On 07/02/2020 15:28:05, Mike Tate <post@...> wrote:

Hi Tom,

The Plugin assumes you have three Source records; one for each of 1) Birth GRO Index, 2) Marriage GRO Index, 3) Death GRO Index.

Then when you find any BMD GRO Index for an Individual the Plugin knows which of those three Source records to cite against the event.

 

So if you have not created those three Source records beforehand you cannot respond to those Plugin prompts.

 

It also presumes you know what UK BMD GRO Index records are all about.

 

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of Tom Beckham via Groups.Io
Sent: 07 February 2020 15:18
To: family-historian@groups.io
Subject: [family-historian] Add GRO Source

 

Is anyone using this plug in? Trying to get it to function,  but getting confused as it requests at the start to select 3 sources. Put it down to my age,  but not sure what the plug in requires me to do to get started. 

_._,_._,_


Re: Add GRO Source

Mike Tate
 

Hi Tom,

The Plugin assumes you have three Source records; one for each of 1) Birth GRO Index, 2) Marriage GRO Index, 3) Death GRO Index.

Then when you find any BMD GRO Index for an Individual the Plugin knows which of those three Source records to cite against the event.

 

So if you have not created those three Source records beforehand you cannot respond to those Plugin prompts.

 

It also presumes you know what UK BMD GRO Index records are all about.

 

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of Tom Beckham via Groups.Io
Sent: 07 February 2020 15:18
To: family-historian@groups.io
Subject: [family-historian] Add GRO Source

 

Is anyone using this plug in? Trying to get it to function,  but getting confused as it requests at the start to select 3 sources. Put it down to my age,  but not sure what the plug in requires me to do to get started. 

_._,_._,_


Re: Add GRO Source

Jane Taubman
 



On Fri, 7 Feb 2020 at 15:18, Tom Beckham via Groups.Io <westbeckham=googlemail.com@groups.io> wrote:
Is anyone using this plug in? Trying to get it to function,  but getting confused as it requests at the start to select 3 sources. Put it down to my age,  but not sure what the plug in requires me to do to get started. 
_

You need to create the "core" sources for GRO index entries,  eg  "UK General Record Office -Birth Register" etc

Once you have created the sources make a note of the numbers and enter them when prompted.

Then you can enter the information and it will add a citation to the selected source for each entry.


-


Add GRO Source

Tom Beckham
 

Is anyone using this plug in? Trying to get it to function,  but getting confused as it requests at the start to select 3 sources. Put it down to my age,  but not sure what the plug in requires me to do to get started. 


Re: File path incorrect, New Windows 10 laptop, FH v 6.27 newly installed

gtbookham+carol
 

Thank you everyone for replying, I have now managed to sort it out.

I have learnt something new about the C: and D: drives, that you don't get told or read about when getting a new machine.

Regards

Carol


Re: File path incorrect, New Windows 10 laptop, FH v 6.27 newly installed

Mike Tate
 

Yes, typically on new PC the C: drive is a comparatively small but fast solid state drive (SSD) intended just for the Windows OS and installed programs but not their data.

Usually there is a large traditional spinning hard disk drive (HDD) D: intended for data, pictures, etc.

If you are using MS OneDrive then set up its OneDrive folder on that D: drive and in its Backup settings you can move the entire Documents folder into the OneDrive folder.

Then in FH File > Project Window > More Tasks > Project List > Choose Location for Projects and browse to D:\OneDrive\Documents\Family Historian Projects folder.

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of Evelyn and Christopher Wilcock via Groups.Io
Sent: 06 February 2020 09:38
To: family-historian@groups.io
Subject: Re: [family-historian] File path incorrect, New Windows 10 laptop, FH v 6.27 newly installed

 

 

I am facing something similar.

 

Our new computer running Windows 10 offered the suggestion to put my document data and pictures in the C:/ drive which I did.

 

But then this morning as I prepared to move more pictures, I saw to my horror that my C:/ drive was almost full and there was another  drive marked D:/ for Data.

This is new to me. Having checked with HP, I am currently moving all my data to the D:/ drive.

After doing that I shall need to tell fh that its data Project folder location is on the D:/ drive.

I could be in trouble too, but I hope not.

 

This may not be relevant to the previous poster. But I too have been in new territory.

.

Evelyn Wilcock


Re: File path incorrect, New Windows 10 laptop, FH v 6.27 newly installed

Jane Taubman
 


When moving Documents folders,  it's important to tell Windows you have done so.

There is a good guide here


Once everything is moved.   If Family Historian is still looking at your C drive, click on the Blue link at the base of the Project Window and redirect it to the correct folder on your new documents folder.




Re: File path incorrect, New Windows 10 laptop, FH v 6.27 newly installed

Victor Markham
 

I have moved a lot of my files from C drive to One Drive where I can also access them on my phone

On 6 Feb 2020, at 09:38, "Evelyn and Christopher Wilcock via Groups.Io" <aol.com@groups.io target=_blank>eandcw=aol.com@groups.io> wrote:

I am facing something similar.

Our new computer running Windows 10 offered the suggestion to put my document data and pictures in the C:/ drive which I did.

But then this morning as I prepared to move more pictures, I saw to my horror that my C:/ drive was almost full and there was another  drive marked D:/ for Data.
This is new to me. Having checked with HP, I am currently moving all my data to the D:/ drive.
After doing that I shall need to tell fh that its data Project folder location is on the D:/ drive.
I could be in trouble too, but I hope not.

This may not be relevant to the previous poster. But I too have been in new territory.
.
Evelyn Wilcock


Re: File path incorrect, New Windows 10 laptop, FH v 6.27 newly installed

Evelyn and Christopher Wilcock <eandcw@...>
 


I am facing something similar.

Our new computer running Windows 10 offered the suggestion to put my document data and pictures in the C:/ drive which I did.

But then this morning as I prepared to move more pictures, I saw to my horror that my C:/ drive was almost full and there was another  drive marked D:/ for Data.
This is new to me. Having checked with HP, I am currently moving all my data to the D:/ drive.
After doing that I shall need to tell fh that its data Project folder location is on the D:/ drive.
I could be in trouble too, but I hope not.

This may not be relevant to the previous poster. But I too have been in new territory.
.
Evelyn Wilcock


Re: Reinstall question

Joseph Levine
 

Thanks, but I just found it.  Sorry. 

 

From: family-historian@groups.io [mailto:family-historian@groups.io] On Behalf Of Mike Tate
Sent: Tuesday, February 04, 2020 5:46 PM
To: family-historian@groups.io
Subject: Re: [family-historian] Reinstall question

 

Hoe,

This Email list is a replacement for the Rootsweb mail list, both run by Simon Orde of Calico Pie.

Neither are anything to do with the FHUG website, so I advise you stick with the FHUG and ask your questions there.

 

The FH File > Backup/Restore commands only backup Projects and do NOT backup your customisations.

So download the ‘Backup and Restore Family Historian Settings’ Plugin from the FH Plugin Store.

It is best to update to FH V6.2.7 and run the Plugin before installing Windows 10.

Then afterwards when you install FH and update to FH V6.2.7 the backups will be compatible.

 

Have you gone to the https://www.microsoft.com/en-us/software-download/windows10 website to Create Windows 10 installation media?

That is the technique that reliably works for free.

 

But this discussion would be much easier in the FHUG Forums.

 

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of Joseph Levine
Sent: 04 February 2020 20:59
To: family-historian@groups.io
Subject: Re: [family-historian] Reinstall question

 

Thanks Mike,

     I do belong to the FHUG. That was how I landed here. I thought it switched over.   I have a few questions.  Is there any need for me to upgrade FH before switching to Windows 10?  I don’t think I have a “Backup and Restore…” plug-in, bur anytime I make changes I use the regular [I thought built-in] “Backup and Restore…” selecting to Full Project option.  Is that the same thing?  As far as Windows 10 goes, I had a few failed upgrade attempts alone, a couple with a computer consultant/tech friend and one each with two Microsoft techs2 on the phone.  One said I’d need to purchase a Product key for full  use once upgraded [but never happened] while the other thought not. So, I think I’ve tried the technique to which you’re referring but I’m not sure. 

Joe

 

From: family-historian@groups.io [mailto:family-historian@groups.io] On Behalf Of Mike Tate
Sent: Tuesday, February 04, 2020 2:59 PM
To: family-historian@groups.io
Subject: Re: [family-historian] Reinstall question

 

Hi Joe,

There is advice on that topic in the FHUG Knowledge Base Family Historian Installation Advice:

https://www.fhug.org.uk/wiki/doku.php?id=how_to:reinstall_family_historian

I suggest you join the FHUG https://www.fhug.org.uk/ that is free and has free resources, forums, downloads, etc.

 

FH V6.2.5 is NOT the latest version, so I strongly advise you update to the free FH V6.2.7 before anything else.

Also make sure you have backups of your FH Projects and anything else on the PC that is valuable.

Don’t forget to run the Backup and Restore Family Historian Settings Plugin, otherwise you may lose all your customisations of Diagrams, Reports, Queries, Plugins, Fact Sets, Property Box tabs, Icons, etc, etc.

 

You only need your FH V6.0.0 Upgrade disk and the Licence Registration Keys for both V5 and V6 as explained in the Installation Advice above.

Then you can update to the latest free FH V6.2.7 download.

 

BTW: Are you using the Windows 10 free update technique? Don’t buy a Windows 10 licence.

 

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of Joseph Levine
Sent: 04 February 2020 18:11
To: family-historian@groups.io
Subject: [family-historian] Reinstall question

 

            I am currently using Family Historian 6.2.5 on a Windows 7 PC.  I need to do an install of Windows 10 that will eliminate my programs/apps.  So, I will need to reinstall FH.  I have my FH 5 disk and the FH 6.0.0 Upgrade disk.  Will I be able to get set on on Windows 10 by using them sequentially and then doing the online upgrades?  If not, what do I need to do?

Joe

 


Re: Reinstall question

Joseph Levine
 

Mike,

    I’m having trouble finding the page to download the plugin.  Would you  please send a link?

Joe

 

From: family-historian@groups.io [mailto:family-historian@groups.io] On Behalf Of Mike Tate
Sent: Tuesday, February 04, 2020 5:46 PM
To: family-historian@groups.io
Subject: Re: [family-historian] Reinstall question

 

Hoe,

This Email list is a replacement for the Rootsweb mail list, both run by Simon Orde of Calico Pie.

Neither are anything to do with the FHUG website, so I advise you stick with the FHUG and ask your questions there.

 

The FH File > Backup/Restore commands only backup Projects and do NOT backup your customisations.

So download the ‘Backup and Restore Family Historian Settings’ Plugin from the FH Plugin Store.

It is best to update to FH V6.2.7 and run the Plugin before installing Windows 10.

Then afterwards when you install FH and update to FH V6.2.7 the backups will be compatible.

 

Have you gone to the https://www.microsoft.com/en-us/software-download/windows10 website to Create Windows 10 installation media?

That is the technique that reliably works for free.

 

But this discussion would be much easier in the FHUG Forums.

 

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of Joseph Levine
Sent: 04 February 2020 20:59
To: family-historian@groups.io
Subject: Re: [family-historian] Reinstall question

 

Thanks Mike,

     I do belong to the FHUG. That was how I landed here. I thought it switched over.   I have a few questions.  Is there any need for me to upgrade FH before switching to Windows 10?  I don’t think I have a “Backup and Restore…” plug-in, bur anytime I make changes I use the regular [I thought built-in] “Backup and Restore…” selecting to Full Project option.  Is that the same thing?  As far as Windows 10 goes, I had a few failed upgrade attempts alone, a couple with a computer consultant/tech friend and one each with two Microsoft techs2 on the phone.  One said I’d need to purchase a Product key for full  use once upgraded [but never happened] while the other thought not. So, I think I’ve tried the technique to which you’re referring but I’m not sure. 

Joe

 

From: family-historian@groups.io [mailto:family-historian@groups.io] On Behalf Of Mike Tate
Sent: Tuesday, February 04, 2020 2:59 PM
To: family-historian@groups.io
Subject: Re: [family-historian] Reinstall question

 

Hi Joe,

There is advice on that topic in the FHUG Knowledge Base Family Historian Installation Advice:

https://www.fhug.org.uk/wiki/doku.php?id=how_to:reinstall_family_historian

I suggest you join the FHUG https://www.fhug.org.uk/ that is free and has free resources, forums, downloads, etc.

 

FH V6.2.5 is NOT the latest version, so I strongly advise you update to the free FH V6.2.7 before anything else.

Also make sure you have backups of your FH Projects and anything else on the PC that is valuable.

Don’t forget to run the Backup and Restore Family Historian Settings Plugin, otherwise you may lose all your customisations of Diagrams, Reports, Queries, Plugins, Fact Sets, Property Box tabs, Icons, etc, etc.

 

You only need your FH V6.0.0 Upgrade disk and the Licence Registration Keys for both V5 and V6 as explained in the Installation Advice above.

Then you can update to the latest free FH V6.2.7 download.

 

BTW: Are you using the Windows 10 free update technique? Don’t buy a Windows 10 licence.

 

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of Joseph Levine
Sent: 04 February 2020 18:11
To: family-historian@groups.io
Subject: [family-historian] Reinstall question

 

            I am currently using Family Historian 6.2.5 on a Windows 7 PC.  I need to do an install of Windows 10 that will eliminate my programs/apps.  So, I will need to reinstall FH.  I have my FH 5 disk and the FH 6.0.0 Upgrade disk.  Will I be able to get set on on Windows 10 by using them sequentially and then doing the online upgrades?  If not, what do I need to do?

Joe

 


Re: Family Historian 7 - Sync with FS

Pedro S Inácio
 

Mike, I agree. And this is sad,  "synch"  is really a great feature. The only reason I am using RM too.
Hints are nice, but is not even close to the sync functionality...

Em qua., 5 de fev. de 2020 às 17:16, Mike Tate <post@...> escreveu:

I very much doubt if FH will ever ‘synch’ with any online tree such as FS, Ancestry, FMP, MyHeritage, etc.

It may raise ‘hints’ as it does with FMP and MyHeritage, but direct ‘synch’ is highly unlikely in my opinion.

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of David Potter via Groups.Io
Sent: 05 February 2020 17:37
To: family-historian@groups.io
Subject: Re: [family-historian] Family Historian 7 - Sync with FS

 

I have the same thoughts and dreams. I use Family Tree Maker 2019. I extract from FH into FTM then synch to Ancestry and FamilySearch. It's a chore but works for me. FH will always be my Master software for Genealogy.

 

Best David

 

On Wed, 5 Feb 2020, 16:52 Pedro S Inácio, <psinacio@...> wrote:

Hi David,

 

Thanks for sharing your thoughts. 

Since last year I started a semi(pseudo)-migration to RootsMagic because of their sync to FS functionality.

But the real fact is that I kind of cannot stop using FH. I feel it is much superior.

 

I will keep dreaming Calico Pie will someday add this ability...

 

Em qua., 5 de fev. de 2020 às 13:35, David Potter via Groups.Io <David.potter5=googlemail.com@groups.io> escreveu:

Hi Pedro
It would appear no one really knows. I think Calico Pie are keeping the details under wraps for now.

David


Re: File path incorrect, New Windows 10 laptop, FH v 6.27 newly installed

Mike Tate
 

Carol,

I am sorry you are having those problems.

The way forward is to describe your symptoms in a lot more detail and provide screenshot attachments.

You can see what is happening but unless you describe it accurately we cannot give the appropriate help.

When referring to files please give as much of the file path and file name as possible.

When referring to displays and commands, describe the relevant details fully.

 

I am going to ask lots of questions, so please answer as many as possible in order to get a solution as quickly as possible.

 

As you say, in the File > Project Window the default Location for your Projects is My Documents\Family Historian Projects.

Does that Family Historian Projects folder exist in your Documents folder when viewed via Windows File Explorer?

 

In Tools > Preferences > Startup what is the Default Startup File path?

 

Exactly what is the filename of the backup zip file you restored?

 

When you used File > Backup/Restore > Restore Backup and chose that zip file what di it say in Location to Restore to: ?

If necessary repeat that command but when reaching that Restore Project from Backup small window click on Cancel.

 

In the File > Project Window does it actually say Current Project: C:\Users\... or Current Gedcom File: C:\Users\...?

 

On the very top line of the main FH window does it say  - Family Historian Project – or – Family Historian Gedcom - ?

 

There is a detailed guide in the FHUG Knowledge Base for migrating from PC to PC and transferring all your Projects, etc.

So you may be better advised to join the FHUG https://www.fhug.org.uk/ which is free and follow the advice there.

 

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of carol@...
Sent: 05 February 2020 16:53
To: family-historian@groups.io
Subject: [family-historian] File path incorrect, New Windows 10 laptop, FH v 6.27 newly installed

 

I am having difficulty getting my file to save and be found easily.
I had saved files on external drive to back up documents when changing over to a new laptop. Also saved to the D: drive is the zipped file created when exiting the program.
I can use restore function to bring the 2000+ person file in and have corrected the link for the media, but it does not seem to save it anywhere I can easily find the next time I go to use FH. So I am unwilling to risk adding anymore information in case it gets lost in the myriad of possible places it may go.
When I click on project window it states current project is in my c: drive as a gedcom file, but the location further down states My documents\ Family Historian Project
 
When I go to open up the project the file name has temporary in brackets but that doesnot have any data in it. The temporary project I created to bring the data into, is also empty each time I open.
I can find it if I browse and hit a file labelled temporary in the Documents/Family Historian Projects/Temporary  but why can I not save it as the main file to be found easily.
Sorry for rambling but computers are not my forte.

 


Re: Hints from FMP not showing in the Web search window

Robin
 

John

I have had this problem several times a year since using Windows 7, 8.1 and now version 10 on a new PC. Although in most instances Mike has never had the problem at the same time as me I firmly believe that it always happens after a Windows update of some kind. Mine last happened about a week ago. I wish there was a way to permanently lock in the required ‘11’ whenever FH is loaded.

Kind regards

Robin Dew

 

From: family-historian@groups.io [mailto:family-historian@groups.io] On Behalf Of saruman via Groups.Io
Sent: 04 February 2020 18:10
To: family-historian@groups.io
Subject: [family-historian] Hints from FMP not showing in the Web search window

 

Hi, This used to work perfectly, but recently when clicking on a link, all I get is a blank page in the web search window. I am wondering if something has happened since the NEW Microsoft Edge was released. Has anybody else had this problem. I am using FH V6.2.7 on Windows 10

regards
John


File path incorrect, New Windows 10 laptop, FH v 6.27 newly installed

gtbookham+carol
 

I am having difficulty getting my file to save and be found easily.
I had saved files on external drive to back up documents when changing over to a new laptop. Also saved to the D: drive is the zipped file created when exiting the program.
I can use restore function to bring the 2000+ person file in and have corrected the link for the media, but it does not seem to save it anywhere I can easily find the next time I go to use FH. So I am unwilling to risk adding anymore information in case it gets lost in the myriad of possible places it may go.
When I click on project window it states current project is in my c: drive as a gedcom file, but the location further down states My documents\ Family Historian Project
 
When I go to open up the project the file name has temporary in brackets but that doesnot have any data in it. The temporary project I created to bring the data into, is also empty each time I open.
I can find it if I browse and hit a file labelled temporary in the Documents/Family Historian Projects/Temporary  but why can I not save it as the main file to be found easily.
Sorry for rambling but computers are not my forte.


Re: Family Historian 7 - Sync with FS

Victor Markham
 

I use both FH and FTM. FH is what I work on all the time. From time to time I copy my tree to FTM for links to other people's trees and anything on ancestry of the names on my tree.
Sorry but I don't use the links shown on the names on FH

On 5 Feb 2020, at 20:17, Mike Tate <post@...> wrote:

I very much doubt if FH will ever ‘synch’ with any online tree such as FS, Ancestry, FMP, MyHeritage, etc.

It may raise ‘hints’ as it does with FMP and MyHeritage, but direct ‘synch’ is highly unlikely in my opinion.

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of David Potter via Groups.Io
Sent: 05 February 2020 17:37
To: family-historian@groups.io
Subject: Re: [family-historian] Family Historian 7 - Sync with FS

 

I have the same thoughts and dreams. I use Family Tree Maker 2019. I extract from FH into FTM then synch to Ancestry and FamilySearch. It's a chore but works for me. FH will always be my Master software for Genealogy.

 

Best David

 

On Wed, 5 Feb 2020, 16:52 Pedro S Inácio, <psinacio@...> wrote:

Hi David,

 

Thanks for sharing your thoughts. 

Since last year I started a semi(pseudo)-migration to RootsMagic because of their sync to FS functionality.

But the real fact is that I kind of cannot stop using FH. I feel it is much superior.

 

I will keep dreaming Calico Pie will someday add this ability...

 

Em qua., 5 de fev. de 2020 às 13:35, David Potter via Groups.Io <David.potter5=googlemail.com@groups.io> escreveu:

Hi Pedro
It would appear no one really knows. I think Calico Pie are keeping the details under wraps for now.

David


Re: Family Historian 7 - Sync with FS

Mike Tate
 

I very much doubt if FH will ever ‘synch’ with any online tree such as FS, Ancestry, FMP, MyHeritage, etc.

It may raise ‘hints’ as it does with FMP and MyHeritage, but direct ‘synch’ is highly unlikely in my opinion.

Regards, Mike Tate

 

From: family-historian@groups.io <family-historian@groups.io> On Behalf Of David Potter via Groups.Io
Sent: 05 February 2020 17:37
To: family-historian@groups.io
Subject: Re: [family-historian] Family Historian 7 - Sync with FS

 

I have the same thoughts and dreams. I use Family Tree Maker 2019. I extract from FH into FTM then synch to Ancestry and FamilySearch. It's a chore but works for me. FH will always be my Master software for Genealogy.

 

Best David

 

On Wed, 5 Feb 2020, 16:52 Pedro S Inácio, <psinacio@...> wrote:

Hi David,

 

Thanks for sharing your thoughts. 

Since last year I started a semi(pseudo)-migration to RootsMagic because of their sync to FS functionality.

But the real fact is that I kind of cannot stop using FH. I feel it is much superior.

 

I will keep dreaming Calico Pie will someday add this ability...

 

Em qua., 5 de fev. de 2020 às 13:35, David Potter via Groups.Io <David.potter5=googlemail.com@groups.io> escreveu:

Hi Pedro
It would appear no one really knows. I think Calico Pie are keeping the details under wraps for now.

David


Re: Family Historian 7 - Sync with FS

David Potter
 

I have the same thoughts and dreams. I use Family Tree Maker 2019. I extract from FH into FTM then synch to Ancestry and FamilySearch. It's a chore but works for me. FH will always be my Master software for Genealogy.

Best David

On Wed, 5 Feb 2020, 16:52 Pedro S Inácio, <psinacio@...> wrote:
Hi David,

Thanks for sharing your thoughts. 
Since last year I started a semi(pseudo)-migration to RootsMagic because of their sync to FS functionality.
But the real fact is that I kind of cannot stop using FH. I feel it is much superior.

I will keep dreaming Calico Pie will someday add this ability...

Em qua., 5 de fev. de 2020 às 13:35, David Potter via Groups.Io <David.potter5=googlemail.com@groups.io> escreveu:
Hi Pedro
It would appear no one really knows. I think Calico Pie are keeping the details under wraps for now.

David


Re: Hints from FMP not showing in the Web search window

Adrian Bruce
 

On Wed, 5 Feb 2020 at 14:13, Mike Tate <post@tatewise.co.uk> wrote:
You have slightly misquoted me.
The IE core shell almost certainly is still ‘supported’.
It is IE that I said is not ‘supported’ by which I meant the user interface built on top of the core shell.
Ooops. Sorry - I ran two sentences together in my reading of your mail.
Adrian


Re: Family Historian 7 - Sync with FS

Pedro S Inácio
 

Hi David,

Thanks for sharing your thoughts. 
Since last year I started a semi(pseudo)-migration to RootsMagic because of their sync to FS functionality.
But the real fact is that I kind of cannot stop using FH. I feel it is much superior.

I will keep dreaming Calico Pie will someday add this ability...

Em qua., 5 de fev. de 2020 às 13:35, David Potter via Groups.Io <David.potter5=googlemail.com@groups.io> escreveu:

Hi Pedro
It would appear no one really knows. I think Calico Pie are keeping the details under wraps for now.

David

3421 - 3440 of 3530