Re: Standard Diagrams - All Descendants
Thanks everybody for the information.
In return, I’m wondering if the following might be of help:
I have a very ‘wide’ tree with 13 generations and nearly 500 entries which is difficult to print. To deal with this, the system I have devised is to –
Install a new PDF printer (Bullzip – Free . . totally easy!)
Print to a PDF file via Bullzip (Size A0)
This results in two pages Landscape (even at A0)
Then use e.g. Adobe Illustrator to seamlessly join the two pages into one single page
Take the result to a print shop that has a printer with continuous (roll) paper feed
Print the result ~ 6 ft long (or scaled to size)
I hope this helps although I suspect that there are a variety of alternate approaches.
From: firstname.lastname@example.org <email@example.com> On Behalf Of Mike Tate via groups.io
Sent: 16 September 2020 13:59
Subject: Re: [family-historian] Standard Diagrams - All Descendants
To clarify, strictly speaking, you are not actually choosing two Individual records but their joint Family record as the Diagram Root, so there still is only one root record.