|
TX direwolf 7 messages
Good evening to you all, After several weeks I will get there one day, I rebuilt a new SD card and always with a CM108 the same CM108 we use for "Alstar Link" naturally "pin #13" is the PTT, with a 2N
Good evening to you all, After several weeks I will get there one day, I rebuilt a new SD card and always with a CM108 the same CM108 we use for "Alstar Link" naturally "pin #13" is the PTT, with a 2N
|
By
Luc Drolet VE2LUQ
·
|
|
RX only Igate forwarding received packets to TX/RX Igate 5 messages
hello all we have a proper functioning Igate on our local intranet that is a bit poorly in the receive dept because of its tower site. I have access to a great site for reception but I cant put a tran
hello all we have a proper functioning Igate on our local intranet that is a bit poorly in the receive dept because of its tower site. I have access to a great site for reception but I cant put a tran
|
By
k9wkj
·
|
|
Multiple modems sharing one audio channel. 5 messages
In QtSoundModem I can have multiple modems sharing one audio channel and so the same sound card. In that way I can offer multiple speed modes at the same frequency. Is this possible with DireWolf and
In QtSoundModem I can have multiple modems sharing one audio channel and so the same sound card. In that way I can offer multiple speed modes at the same frequency. Is this possible with DireWolf and
|
By
Boudewijn (Bob) Tenty VE3TOK
·
|
|
Raspberry Pi 3 Model A+ 7 messages
Will Direwolf run on the Raspberry Pi 3 Model A+ and read a sound fob over usb like it does on the Pi3b does?
Will Direwolf run on the Raspberry Pi 3 Model A+ and read a sound fob over usb like it does on the Pi3b does?
|
By
Russell, KV4S
·
|
|
[UPDATE/FIXED] direwolf openwrt
good evening, cm108-ptt works now. (hoorayy) i've just need to install kmod-usb-hid (kernel module) and boom!! when i plugged cm108 soundcard hidraw0 device is there 😀 i don't have to recompile custom
good evening, cm108-ptt works now. (hoorayy) i've just need to install kmod-usb-hid (kernel module) and boom!! when i plugged cm108 soundcard hidraw0 device is there 😀 i don't have to recompile custom
|
By
Hari Hendaryanto
·
|
|
direwolf openwrt 6 messages
good day guys. i'm new to direwolf and this mailing list. i was successfully building direwolf 1.7 for openwrt recently, based on this Makefile https://github.com/Luceoria/openwrt-direwolf/blob/master
good day guys. i'm new to direwolf and this mailing list. i was successfully building direwolf 1.7 for openwrt recently, based on this Makefile https://github.com/Luceoria/openwrt-direwolf/blob/master
|
By
Hari Hendaryanto
·
|
|
FX.25 via Bluetooth KISS 2 messages
Read through all the documentation I could find and can't determine whether FX.25 is enabled with the KISS interface. My application generates APRS/AX.25 packets and then sends them to the bluetooth T
Read through all the documentation I could find and can't determine whether FX.25 is enabled with the KISS interface. My application generates APRS/AX.25 packets and then sends them to the bluetooth T
|
By
Martin Greatorex
·
|
|
RX OK, NO TX 15 messages
Hello everyone, I made a few changes to make DIREWOLF work. now i am using an FT 2600M radio I use the DB-9 behind this radio pin 2 and 3 at 9600 Bauts my RX is working fine as you can see in the pict
Hello everyone, I made a few changes to make DIREWOLF work. now i am using an FT 2600M radio I use the DB-9 behind this radio pin 2 and 3 at 9600 Bauts my RX is working fine as you can see in the pict
|
By
Luc Drolet VE2LUQ
·
|
|
[SOLVED] v1,7E -L option not recording?
Thanks for your patience, so it's not a problem after all. ... NXXXX-9 audio level = 50(9/9) [NONE] |||||____ [0.2] NXXXX-9>APDR15,WIDE1-1,WIDE2-1:=4715.16N/12040.29Wk146.620MHz/A=002611 Furry Dog Pos
Thanks for your patience, so it's not a problem after all. ... NXXXX-9 audio level = 50(9/9) [NONE] |||||____ [0.2] NXXXX-9>APDR15,WIDE1-1,WIDE2-1:=4715.16N/12040.29Wk146.620MHz/A=002611 Furry Dog Pos
|
By
Rusty Travis
·
|
|
Is DNS-SD supported for Windows version of Direwolf? 2 messages
Hi all, Getting to find my way around Direwolf running on a Win10 PC. When I try to use the APRS.FI app, it doesn't find Direwolf and there is no method to manually add the Win10's IP address. Does th
Hi all, Getting to find my way around Direwolf running on a Win10 PC. When I try to use the APRS.FI app, it doesn't find Direwolf and there is no method to manually add the Win10's IP address. Does th
|
By
Ian Tickle
·
|
|
v1,7E -L option not recording? 3 messages
Greetings, I'm using: ##### $ direwolf -L /home/repeater/direwolf.log Dire Wolf DEVELOPMENT version 1.7 E (Apr 14 2022) Includes optional support for: cm108-ptt Reading config file direwolf.conf Audio
Greetings, I'm using: ##### $ direwolf -L /home/repeater/direwolf.log Dire Wolf DEVELOPMENT version 1.7 E (Apr 14 2022) Includes optional support for: cm108-ptt Reading config file direwolf.conf Audio
|
By
Rusty Travis
·
|
|
Twist setting, balancing 1200 et 2200Hz 7 messages
Hi, I am in the process of building a tracker based on Orange Pi Zero and Direwolf. This will replace my old trustworthy Tinytrak4.I am using a Kenwod TM271 which is an amazing radio, only issue with
Hi, I am in the process of building a tracker based on Orange Pi Zero and Direwolf. This will replace my old trustworthy Tinytrak4.I am using a Kenwod TM271 which is an amazing radio, only issue with
|
By
Geoffrey Merck
·
|
|
Calibration Tones mismatch 5 messages
hi, Today I ran into a small glitch while trying to calibrate my APRs setup. The tone displayed on screen does not match the actual sent tone. Opened an issue on GitHub. https://github.com/wb2osz/dire
hi, Today I ran into a small glitch while trying to calibrate my APRs setup. The tone displayed on screen does not match the actual sent tone. Opened an issue on GitHub. https://github.com/wb2osz/dire
|
By
Geoffrey Merck
·
|
|
TX with Modulation 10 messages
Good evening to you all, Is there a "Command line" method say on the radio "TX" with a modulation on this broadcast? this is to check if all my connections are correct currently I am transmitting in a
Good evening to you all, Is there a "Command line" method say on the radio "TX" with a modulation on this broadcast? this is to check if all my connections are correct currently I am transmitting in a
|
By
Luc Drolet VE2LUQ
·
|
|
FILTER issue? 7 messages
All During the analysis of Packets/messages looping from Switzerland digipeaters I find another strange behaviour. The Digi / IGate HB9IPA - based on DireWolf 1.7 - has this entry in the .conf file: #
All During the analysis of Packets/messages looping from Switzerland digipeaters I find another strange behaviour. The Digi / IGate HB9IPA - based on DireWolf 1.7 - has this entry in the .conf file: #
|
By
HB9EYZ
·
|
|
FT-25 in transmit on reboot 12 messages
I set up a personal iGATE digipeater late last week. I'm using Direwolf on a Pi3b then a digirig with a cable to the FT-25 to be the radio. Everything is working great, however, if i reboot the pi or
I set up a personal iGATE digipeater late last week. I'm using Direwolf on a Pi3b then a digirig with a cable to the FT-25 to be the radio. Everything is working great, however, if i reboot the pi or
|
By
Russell, KV4S
·
|
|
30m aprs
Im back on 30m aprs today , any tips on items to check or frequencys to tune, setting to cut down on HF transmitting spam.... any other bands to listen for at night ? how about 5mhz ? thanks brad ko6k
Im back on 30m aprs today , any tips on items to check or frequencys to tune, setting to cut down on HF transmitting spam.... any other bands to listen for at night ? how about 5mhz ? thanks brad ko6k
|
By
Brad Ko6kL
·
|
|
Windows executable 1.7E 9 messages
I am trying to find the x86_64 install zip file for Direwolf 1.7E if it's available. Thanks Brian, N0DBH brian@...
I am trying to find the x86_64 install zip file for Direwolf 1.7E if it's available. Thanks Brian, N0DBH brian@...
|
By
Brian N0DBH
·
|
|
Direwolf Configuration Help Requested 4 messages
Thanks in advance ... I searched the archive for info on getting PERSIST and SLOTTIME set up correctly and haven't found the answer. I'm hoping someone here can help. I'm running Direwolf on a Raspber
Thanks in advance ... I searched the archive for info on getting PERSIST and SLOTTIME set up correctly and haven't found the answer. I'm hoping someone here can help. I'm running Direwolf on a Raspber
|
By
Roland Smith
·
|
|
Custom Colors 39 messages
Is there a way to custom set the colors in direwolf? Something other than the retina burning white background? Thanks, -Michael N5ZR
Is there a way to custom set the colors in direwolf? Something other than the retina burning white background? Thanks, -Michael N5ZR
|
By
Michael Champion
·
|