Earlier this week I ran through Appendix 5 Adjustment/Calibration and measured output of 1.65 watts. Also had trouble making any adjustments with R10. Someone else had the same two issues and suggeste

George, Phaser #'s 133 & 135 built. Number 132 and 134 still in the bags and eagerly awaiting their turn. I agree with all on the design, packaging and kitting. Besides being a lot of fun, it is a rea

Hi all, We now have updated all Instructions documents revision level A.9 and located on the Phaser home page. Changes include: - Adding a Revisions section at the end of each document to let us know

Carson, I dip solder wick in rosin solder paste first. That helps the solder flow up the wick. When I first tried solder wick by itself the solder wouldn’t wick up and so I thought it was a bad idea.

Hi David, For starters, let's try some easy 'hands-on' troubleshooting steps: 1) What does the WSJT-X signal strength indicator show- both with and without an antenna? 2) When you probe the output of

Dave, There is 5 volts on pin 5 also. David J. Wilcox K8WPE’s iPad

David J. Wilcox K8WPE’s iPad Begin forwarded message:

This is my first electronics kit build and I have to say the organization, the instructions, and the board silkscreening makes the assembly a no brainer. I've been taking my time, slowly making my way

Hello all, I wouldn’t want to use 50W....but at 13.8V this amp puts out around 15W. Would a Phaser at 20m play well with a 20m version of this amp put out by qrp-labs? http://qrp-labs.com/50wpa.html K

I have Phaser #87 20m unbuilt kit. Anyone with a 30m version interested in swapping? Thanks, Paul K4FB

I've been chasing ghosts lately while using existing/old coax cables to patch together various pieces of equipment and accessories here in the shack. I wiggle the coax connections and get very disturb

In the TR switching test make sure you have your computer speakers turned up enough to trip the circuit. Mine was initially set to 17% and after resoldering many connections I finally woke up to the f

Hello all - if anyone is keeping a wish list, put me down for 10 meters and the option to have JS8 frequencies as the primary David Goodrow N1OMO

Hi all, I wanted to remind you that we have a Troubleshooting Manual in the "Documents" section of our Phaser home page which may be very helpful to people in getting their Phasers working. There are

A quick update on my Phaser #003 30 meter efforts... 263 Q's 46 states worked, IA, ND,NE and WI left to work from MN. 43 confirmed in LOTW Canada - QC, ON, AB, SK, BC DX -AK, HI. Colombia, Spain, and

I've been enjoying the Phaser build, and rather than do stage by stage I've just done a parts stuff, being very careful to get the parts in right the first time! I got to the point where I was putting

I was testing the Phaser 40 and suddenly the receiver did not work. I hooked the output to the mic input, and ran that to the sound card out to see what was going on and all I had was noise. I removed

What a great kit. Phaser #75 (80M) is just about done and then onto #76 (30M). After this, I need to order another kit to try and get one on the air for 160M. Thanks George, Dave, et al. N1ESE

Hi William, No problem at all. Just send me your modem and I’ll update everything for you at no charge and return in it working order. My address is at the bottom of the modem Order page <https://www.

#111 on the air today with 3W our on my prototype magloop on my tabletop. 73, Kurt-AE6UJ