Hi all, Shipping Status: The kits and the assembled kits are shipping now. We've prepared 150 kits in stock as the first batch. Supply up to 1000 kits is possible later. Introductory price in October

Anyone have a mike they don't need to work with this rig? Mike, ww5wm www.bella-green.com STDX, TDXS, FISTS, QRP-L, ARS, SOC, Flying Pigs, IQRP, AQRP, QCWA, RSGB, QRP-ARCI , NAQCC, One of many past ed

I've had a KN-Q7A for quite some time, but never used it. Now a trip to Malta has come up and I want to consider taking it with me to do some operating there. Issue is that when it's powered up with t

All, We are still closed due to COVID lock down. The open date is still unknown, probably 1-2 months later. Please hold your order. If you haven't noticed my suggestion at the top of my web store, I a

All, I ordered the Fair-Rite FT37-43 toroids from Mouser USA last December, and the shipping date was pushed out and out, and finally they shipped a few days ago, after more than 3 months! The Fair-Ri

Does anyone know of a distributor for "Torch" radial MLCC caps? Thanks, ken

Folks, I have built the 13TR without problem, and would like to simulate the crystal filter to assess the ripple on the bandpass. Has anyone motional parameters for the 7078 kHz crystals? I did found

Adam, I am quite pleased with the sensitivity with the rewound inductor. As I mentioned in my comparison I am using an indoor magnetic loop antenna about 3 ft above the outside ground level, so the an

so built the 13TR...thought it went well. was able to set freq, checked the TR function that worked.. hooked to antenna, and all I hear is a local broadcast station.. haven't tried the xmit yet.. woul

I started assembling the CS-40V and there are only 6 pieces of IF crystals 4672 in the package and there should be 8. Am I doing something wrong?

All, Please check out the recent D4D kits, especially D4D 20m MOD kits, to see if you have the following batch BD139 with code NXP 54. If you find it, please contact me for replacement or compensation

All, I was just informed that the air parcel shipping to USA is not accepted at this moment. FedEx rate will be as high as 30 USD for the first 500 grams. Please hold the order for now. Thanks, Adam

All, Look for Winter Olympic Special Event BY1CRA/WO22 on all HF bands in SSB/CW/FT8 mode. Apply award online at https://www.crac.org.cn/wo QSL Manager BA4TB Thanks, Adam

Hi All, Chinese New Year of Tiger is coming. We cannot ship anything during the holiday from Jan 29 to Feb 7. Wish you good luck and I hope the situation will get better. Thanks, Adam CRKits.COM

The following files have been updated in the Files area of the crkits@groups.io group. /13 Transistor 40m FT8 SSB/13TR Kit Assembly Manual Rev.A.pdf By: Adam Rong <rongxh@...> Description: The first f

Folks, I just left my supply chain job in Shenzhen and returned to Shanghai. From what I have seen, the supply chain of the semiconductors seems still very tight. Some car makers either stop their lin

All, 10 years ago, with the announcement of the KN-Q7A SSB kit, CRKits started. Now, with the announcement of 13 Transistor Transceiver for Digital, we are happy to celebrate the 10 year anniversary.

Adam just ordered the 80 meter version and had a 20 meter version a month or so ago. where can I find an updated manual noticed the one here was dated 2020. thanks tom

Hi! Does anybody have any thoughts about attempting to replace the crystals in a D4D with a SI5351A-based VFO? I have a spare SI5351A and microcontroller, so it's tempting to try something like VK5DJ