Here is a video of the HT-1 working France on 40 meters. https://youtu.be/kQ3ejWvU-3M One last share about the HT-1-- its been a fun little rig and I would love to have one with the 30 or 17 meters. 7

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the crkits@groups.io group. /D4D Kit Documentations/Piconfig.pdf Uploaded B

Hello, This email message is a notification to let you know that the following files have been updated in the Files area of the crkits@groups.io group. /D4D Kit Documentations/d4dpartlist20200524forMP

Hello, I have just updated the web site to include CS-xxV and CRK-10A ordering information. http://crkits.com Email order is more interactive so I will slowly change to email order later. The HT-1A st

Alright Driekus up until yesterday evening that was my problem too. Then I started with my Sound Blaster dongle got Sound Card and it started receiving packets on the Waterfall. Well good luck as we t

Hi Adam, Can we purchase extra crystals for different bands with the D4D kit if we buy at the same time? Sorry if the question has been asked before. The only place we can buy them in the Asia Pacific

Folks, As the previous batch of taller (HC-49U) crystals with 14.070 MHz marking are depleted, the new crystals are shorter (HC-49S), and the marking is 14.074 MHz. The oscillating capacitors are chan

Folks, I am talking to BA6BF about the possibility to resell through my channel and basically he agrees. As I have other competitors, I would choose to resell as is, without too much customization, bu

Folks, With 5-watt, I logged the first QSO at 21.255MHz. See this post: https://mp.weixin.qq.com/s/2Xaxjzf4M2VKpGGPbA1fyQ Thanks, Adam

Hi all, not sure if anyone can help but I'll ask: I bought a KN-850 from a fellow ham and tested it and find that on 6M it only puts out about 1/2W. I have all the proper equipment and do know what I

I'm looking for a used KN-Q10A transceiver or a kit. Make a reasonable offer. Gilles F1BFU /FR

Folks, I just received the first customer feedback from Japan. It seems the customer encountered some typical issues, so here I explain again. He feels poor receiver sensitivity and about 1.5 watt RF

Currently I try to test the receiving part with an antenna I use on my SDR. On my SDR I receive fine on 7074, but on the DSD I hear with headphones a very soft beep. On the microphone input on my pc I

Folks, I am considering Payoneer as an alternative payment solution. I’d like to know if you like to use Payoneer to make payment. Thanks in advance. Thanks, Adam

Hi, what setup is recommended to run on a Raspberry Pi for the DSD for FT8? Driekus

Just got my D4D and thought I read a post about an IMD mod for improvement. Has anyone done the mod and if so did it improve? and what steps did you take? Just wanted to figure in do it during build o

Guys, I spent an afternoon in Park setting up my K2 and building a CA3028 receiver kit with my friend BD6EC, Dr. Huang. https://mp.weixin.qq.com/s/sQ0srpRBtwD9xxvMQBEtoQ Thanks, Adam

The QRP-Labs 50W amplifier makes a great (and inexpensive) single-band amp for the HT-1A. https://www.qrp-labs.com/50wpa.html To key the amp, a 5v keying line is needed from the HT-1. On the HT-1 disp

Hello, I've been using the D4D as part of my FT8/WSPR beacon and monitoring station for several months now, very good performance I must say. However, recently, it stopped working. It was not able to

Folks, Recently I focus on supply chain and manufacturing in my professional work, and I visited 10 OEM factories in the past two weeks. In my piece, I wrote that it might be good training material to