Hi all, I have made a decision to turn this yahoo group to a forum to support overseas Chinese kit builders and merchants. We will see more overseas kit builders and merchants joining. 73 de BD6CR/4,

Hi all, You can download it freely from: http://www.qsl.net/bd6cr/knq10manual.pdf 73 de BD6CR/4, Adam Rong

Good to see this list back! 73, BA4TB --- 10年10月13日，周三, xinhuarong 写道： 发件人: xinhuarong 主题: [CHINA_QRP] Do you still remember? 收件人: CHINA_QRP@... 日期: 2010年10月13日,周三,下午11:17 Hi all, I have made a decisi

Thanks to AE5X to write about the KN-Q10 Assembly manual and much more about the kit. If you have interest to read the blog, here it is: http://www.ae5x.com/blog/2010/10/13/english-manual-now-availabl

Hi BA4TB, Welcome back, too! 73 de BD6CR/4, Adam

Can anyone tell me how to buy the KN=Q10 KIT? thanks Robert N8RT

Hi ! Is there any infor reg the CAT interface for this rig ? I see a USB connection .... or is it only for software upgrade ? Anyway, the RIG is on its way to my QTH. Looking forward to assemble it. 7

Why can't I read any of the Chinese text here? It works ok when I type Chinese here but it doesn't re-post in Chinese characters. Annoying.

Thanks to Stephen, VK2RH and other nice guys. We updated to Rev B to reduce grammatic mistakes and added links to schematic and encoder switch rework photos. http://www.qsl.net/bd6cr/knq10manual.pdf 7

Hi, I will be out and don't have email access from Oct 15 to Oct 17. 73 de BD6CR/4, Adam

No damages on the shipment. I used friday evening to sort the diffrent components. Sunday evening to assemble the Display/frontpanel. The display unit is now finished. No building issues so far. Modif

Hi all, I bought an Elecraft K2 kit with serial number 007043 during my business trip in USA recently. I don't yet have time to start to build it, but it looks pretty good by the first glance. The par

http://v.youku.com/v_show/id_XMTg3ODc3MTgw.html 73 de BD6CR/4, Adam

It's been almost a year since last update. I added some information to my web site on qsl.net. You can access by using: http://bd6cr.net 73 de BD6CR/4, Adam

First power on test : I had problems with no light or characters in display. After searching for the problem, and advise from Adam R., i found that the wire for anode voltage( +5V) to the display unit

A couple of completed KN-Q10 photos for your reference, posted by BA6BF. http://www.hellocq.net/forum/showthread-t-250417.KN-Q10%E7%85%A7%E7%89%87.html Thanks, Adam

Folks, while waiting for the arrival of the kit I have read the manual in English with great attention. I have several comments/questions I would like to solve prior to the building session. On toroid

Hi all, After seeing the photos of the completed KN-Q10, one of the careful builders asked me if additional modifications not covered in assembly manual are required before smoke test. I have confirme

Hi all, If one of the bands cannot get locked, you can set the frequency to 15.100MHz, and turn the core of L3-1 to the middle position slowly and mildly, then turn it down till it locks. Normally eve

Greetings, Adam! I wish to collect your set, but has not found the exhaustive information. I had some questions on transceiver KN-Q10: 1. Specify please borders TX on each of ranges. 2. Whether there