Date   
CRKITS.COM Retail Price Update

Adam Rong
 

Guys,

The following price will be effective from today. Web site will be updated this weekend. My Chinese New Year holiday starts from Feb 10. Before Chinese New Year, the shipment windows are Jan 29 and Feb 5. The shipment will be resumed on Feb 26 hopefully. Email order is available before web site update at rongxh@...

Item, CRKITS.COM retail price, CRKITS.COM shipping

Newly added:
C0G/NP0 Mono Cap Assortment 21x2535, 5
25 each of Torch brand 100V 5% 5.08mm lead space of 21 values: 5.1p, 10p, 15p, 22p, 27p, 33p, 39p, 47p, 68p, 82p, 100p, 120p, 150p, 220p, 270p, 330p, 390p, 470p, 560p, 820p

Price reduced:
CRK-10A kit, 44 (down from 55, limited stock), 5
Choc board, 2.5 (down from 3), 5
Case + 2 Choc, 15 (down from 18), 7 (down from 8)
CS kit, 99 (down from 113), 8 (down from 12)
CS kit + speaker mic, 120 (down from 138), 10 (down from 12)

Price unchanged:
DIY series coils and customized crystals, 1.5, 5
Sandwich kit, 19.9, 5
Sandwich programmer, 9.9, 0
R3500D kit, 30, 6
R3500D assembled, 39, 6

Thanks,
Adam

Test post only

 

Bob AF2DX

On Jan 26, 2018 10:29 AM, "Adam Rong rongxh@... [CHINA_QRP]" <CHINA_QRP@...> wrote:
 

Guys,


The following price will be effective from today. Web site will be updated this weekend. My Chinese New Year holiday starts from Feb 10. Before Chinese New Year, the shipment windows are Jan 29 and Feb 5. The shipment will be resumed on Feb 26 hopefully. Email order is available before web site update at rongxh@...

Item, CRKITS.COM retail price, CRKITS.COM shipping

Newly added:
C0G /NP0 Mono Cap Assortment 21x25, 35, 5
25 each of Torch brand 100V 5% 5.08mm lead space of 21 values: 5.1p, 10p, 15p, 22p, 27p, 33p, 39p, 47p, 68p, 82p, 100p, 120p, 150p, 220p, 270p, 330p, 390p, 470p, 560p, 820p

Price reduced:
CRK-10A kit, 44 (down from 55, limited stock), 5
Choc board, 2.5 (down from 3), 5
Case + 2 Choc, 15 (down from 18), 7 (down from 8)
CS kit, 99 (down from 113), 8 (down from 12)
CS kit + speaker mic, 120 (down from 138), 10 (down from 12)

Price unchanged:
DIY series coils and customized crystals, 1.5, 5
Sandwich kit, 19.9, 5
Sandwich programmer, 9.9, 0
R3500D kit, 30, 6
R3500D assembled, 39, 6

Thanks,
Adam

Re: HB1B

 

Any member here have the later HB1B rig? Want to know  what the new chip does and can I buy the  chip? Thanks Bob 

On Jan 28, 2018 2:07 AM, "Bob Lech beargyrils@... [CHINA_QRP]" <CHINA_QRP@...> wrote:
 

Bob AF2DX

On Jan 26, 2018 10:29 AM, "Adam Rong rongxh@... [CHINA_QRP]" <CHINA_QRP@...> wrote:
 

Guys,


The following price will be effective from today. Web site will be updated this weekend. My Chinese New Year holiday starts from Feb 10. Before Chinese New Year, the shipment windows are Jan 29 and Feb 5. The shipment will be resumed on Feb 26 hopefully. Email order is available before web site update at rongxh@...

Item, CRKITS.COM retail price, CRKITS.COM shipping

Newly added:
C0G /NP0 Mono Cap Assortment 21x25, 35, 5
25 each of Torch brand 100V 5% 5.08mm lead space of 21 values: 5.1p, 10p, 15p, 22p, 27p, 33p, 39p, 47p, 68p, 82p, 100p, 120p, 150p, 220p, 270p, 330p, 390p, 470p, 560p, 820p

Price reduced:
CRK-10A kit, 44 (down from 55, limited stock), 5
Choc board, 2.5 (down from 3), 5
Case + 2 Choc, 15 (down from 18), 7 (down from 8)
CS kit, 99 (down from 113), 8 (down from 12)
CS kit + speaker mic, 120 (down from 138), 10 (down from 12)

Price unchanged:
DIY series coils and customized crystals, 1.5, 5
Sandwich kit, 19.9, 5
Sandwich programmer, 9.9, 0
R3500D kit, 30, 6
R3500D assembled, 39, 6

Thanks,
Adam


Re: An idea of a charity project

petrika_j@...
 

Hello Adam,

I think this is really great idea.

Here in Z3 (Macedonia) one of our friends, Z35A has fire ih his PPS and he lost everything in a moment ( https://www.facebook.com/trajko.gjorcevski/media_set?set=a.1481376748656000.1073741835.100003510672654&type=3&pnref=lhc )
Our Radio Club Z3FFF - Zeleznicar from it modest funds donate one VHF handheld radio. Unfortunately we do not have more funds to provide this vetaran operator with HF station to continue his work on HF bands.
I read today that you start this project supporting HAM operators in need world wide. Would you be so kind to donate one kit to our operator also ? This kit will be assembled by one of our operators (Goran Trajanovski, https://www.facebook.com/goran.trajanovski.54 ) and after that we are going to give this unit to Z35A as fully assembled unit.

I hope this would help our friend Z35A to start work again and recover from this terrible disaster.

Eveyone interested to donate for our friend is welcome to contact our club president, Mr.Goce Boshkovski (Z36TT) at Facebook  ( https://www.facebook.com/goceb ) and arrange details about eventually donation in equipment.

Thank you very much for your help and understanding of situation.

With regards
Petrika
Z34PEC

Re: An idea of a charity project

Adam Rong
 

Hi Petrika,

Thanks for providing the information of the people in need. Let me update to you the comments I have received so far. Charity account is very sensitive and we will make it simple: if we do charity project, we will offer at low price so people can afford it. If people need donation, one radio per year is okay for me. I will let the members of this group to comment if it is okay to use this year’s quota. I will send the kit if I receive 5 replies saying yes.

Thanks,
Adam

在 2018年2月3日,下午2:44,petrika_j@... [CHINA_QRP] <CHINA_QRP@...> 写道:

 

Hello Adam,

I think this is really great idea.

Here in Z3 (Macedonia) one of our friends, Z35A has fire ih his PPS and he lost everything in a moment ( https://www.facebook.com/trajko.gjorcevski/media_set?set=a.1481376748656000.1073741835.100003510672654&type=3&pnref=lhc )
Our Radio Club Z3FFF - Zeleznicar from it modest funds donate one VHF handheld radio. Unfortunately we do not have more funds to provide this vetaran operator with HF station to continue his work on HF bands.
I read today that you start this project supporting HAM operators in need world wide. Would you be so kind to donate one kit to our operator also ? This kit will be assembled by one of our operators (Goran Trajanovski, https://www.facebook.com/goran.trajanovski.54 ) and after that we are going to give this unit to Z35A as fully assembled unit.

I hope this would help our friend Z35A to start work again and recover from this terrible disaster.

Eveyone interested to donate for our friend is welcome to contact our club president, Mr.Goce Boshkovski (Z36TT) at Facebook  ( https://www.facebook.com/goceb ) and arrange details about eventually donation in equipment.

Thank you very much for your help and understanding of situation.

With regards
Petrika
Z34PEC

CS-40F: Radio for FT-8

Adam Rong
 

Gang,

We are working on a radio kit around 7074kHz USB dedicated for FT-8. Basically it is a crystal controlled KN-Q7A working in USB mode with narrow fine tuning range and high frequency stability. The price will be around 85 USD including shipping. Let me know if you like it.

Thanks,
Adam

Re: CS-40F: Radio for FT-8

Michael DB2GM <db2gm@...>
 

Hello Adam 
this is a great idea, we certainly will like such a small device which we can connect to an Raspberry PI3 and then have a small FT8 station.
vy 73 de Michael DB2GM 

Am 02.03.2018 um 17:22 schrieb Adam Rong rongxh@... [CHINA_QRP] <CHINA_QRP@...>:

Gang,

We are working on a radio kit around 7074kHz USB dedicated for FT-8. Basically it is a crystal controlled KN-Q7A working in USB mode with narrow fine tuning range and high frequency stability. The price will be around 85 USD including shipping. Let me know if you like it. 

Thanks,
Adam


Re: CS-40F: Radio for FT-8

n7rgw
 

I like the idea.  Especially being able to connect it to a Raspberry Pi.


On Friday, March 2, 2018 11:43 AM, "Michael DB2GM db2gm@... [CHINA_QRP]" wrote:


 
Hello Adam 
this is a great idea, we certainly will like such a small device which we can connect to an Raspberry PI3 and then have a small FT8 station.
vy 73 de Michael DB2GM 

Am 02.03.2018 um 17:22 schrieb Adam Rong rongxh@... [CHINA_QRP] <CHINA_QRP@...>:

Gang,

We are working on a radio kit around 7074kHz USB dedicated for FT-8. Basically it is a crystal controlled KN-Q7A working in USB mode with narrow fine tuning range and high frequency stability. The price will be around 85 USD including shipping. Let me know if you like it. 

Thanks,
Adam



Re: CS-40F: Radio for FT-8

John Landry
 

Hello Adam,

I'm very much interested in your new FT-8 transceiver, but first I have a question...

Since the FT-8 mode requires setting (and maintaining) a precise operating frequency, unless we used an external frequency counter, how would we tune this transceiver to the exact, correct frequency? 

Thank you and 73,

John L.
AA7US
QSO with me at:
IRLP node 3871
Echolink node AA7US-L (38712)
D-Star reflector XRF002A
DMR ID: 3153193

Re: CS-40F: Radio for FT-8

Adam Rong
 

John and all,

Thanks for the interest. I have completed building the first sample, and I have the following data:

Weight: 390 grams
RX current: 22 mA @ 12 volt
TX power: 5 watt PEP @ 12 volt
Tuning range: 7072.2~7076.2 kHz for FT-8 and JT-65 and etc
Working mode: Upper Sided Band only
Passband: 300~3000 Hz
IF filter: 4-pole
Front Panel:
1. Tuning and AF Gain controls, and a red LED for TX status indication
2. Microphone connector: You will need a sound card interface circuit to connect from the microphone connector of this radio to PC, and VOX circuit is not included in this radio. Of course, if you wish to add them internally, you have enough room to do so.

Although I have removed IF amplifier stage, after some other modifications, the sensitivity is good enough for 40-meter band. The frequency stability is quite good as it is a crystal controlled radio with narrow tuning range (using varactor diode tuning without inductor in series, and there is no inductor in BFO either).

To answer your question about tuning, just like other radio without frequency display, listen before talk is very important. You can use the waterfall diagram of the software to make sure you receive at the right frequency. What I can assure you is that the TX frequency is the same as the RX frequency. No, RIT or XIT feature is not included on this radio.

If someone wish to test the radio, contact me off line and I am okay to ship this sample at 100 USD including air shipping.

Thanks,
Adam

在 2018年3月3日,上午5:19,John Landry landrjoh@... [CHINA_QRP] <CHINA_QRP@...> 写道:

Hello Adam,


I'm very much interested in your new FT-8 transceiver, but first I have a question...

Since the FT-8 mode requires setting (and maintaining) a precise operating frequency, unless we used an external frequency counter, how would we tune this transceiver to the exact, correct frequency? 

Thank you and 73,

John L.
AA7US
QSO with me at:
IRLP node 3871
Echolink node AA7US-L (38712)
D-Star reflector XRF002A
DMR ID: 3153193


Re: CS-40F: Radio for FT-8

Adam Rong
 

All,

I realized that frequency stability and precision is a major concern, so I made a few changes and tests. Now the tuning range is reduced to 7073.7-7074.3 kHz in room temperature at about 16 degree C. It will help easy fine tuning.

I did a test for temperature stability. I use hair dryer to heat the board, and monitor the frequency drift by zero beating a stable signal from the generator. The frequency increased about 130 Hz. It explains why we will need tuning range of a few hundred hertz to tune back. Another concern is the short term stability. To minimize the impact, I reduced power to 5 watt, and 15 sec TX will not generate too much heat. I will measure with high performance frequency counter to make sure.

Thanks,
Adam

在 2018年3月3日,下午8:26,Adam Rong <rongxh@...> 写道:

John and all,

Thanks for the interest. I have completed building the first sample, and I have the following data:

Weight: 390 grams
RX current: 22 mA @ 12 volt
TX power: 5 watt PEP @ 12 volt
Tuning range: 7072.2~7076.2 kHz for FT-8 and JT-65 and etc
Working mode: Upper Sided Band only
Passband: 300~3000 Hz
IF filter: 4-pole
Front Panel:
1. Tuning and AF Gain controls, and a red LED for TX status indication
2. Microphone connector: You will need a sound card interface circuit to connect from the microphone connector of this radio to PC, and VOX circuit is not included in this radio. Of course, if you wish to add them internally, you have enough room to do so.

Although I have removed IF amplifier stage, after some other modifications, the sensitivity is good enough for 40-meter band. The frequency stability is quite good as it is a crystal controlled radio with narrow tuning range (using varactor diode tuning without inductor in series, and there is no inductor in BFO either).

To answer your question about tuning, just like other radio without frequency display, listen before talk is very important. You can use the waterfall diagram of the software to make sure you receive at the right frequency. What I can assure you is that the TX frequency is the same as the RX frequency. No, RIT or XIT feature is not included on this radio.

If someone wish to test the radio, contact me off line and I am okay to ship this sample at 100 USD including air shipping.

Thanks,
Adam

在 2018年3月3日,上午5:19,John Landry landrjoh@... [CHINA_QRP] <CHINA_QRP@...> 写道:

Hello Adam,


I'm very much interested in your new FT-8 transceiver, but first I have a question...

Since the FT-8 mode requires setting (and maintaining) a precise operating frequency, unless we used an external frequency counter, how would we tune this transceiver to the exact, correct frequency? 

Thank you and 73,

John L.
AA7US
QSO with me at:
IRLP node 3871
Echolink node AA7US-L (38712)
D-Star reflector XRF002A
DMR ID: 3153193


Ham Radio Shack clearance sale.....Rigs for sale.

Daniel White
 



Hi

I am clearing a SK shack on behalf of the XYL.

Here are the equipment remaining after some hamfests....

Icom 7700,ICOM IC 7800
ANAN-100D SDR
Yaesu FTDX 5000
Flex 6500,Flex 6300
Kenwood TS-2000LE, Kenwood TS 990
Ten-Tec Omni VII model 588AT
Ten-Tec Orion II
Alpha 9500
ACOM 2000A, Icom PW1
Ameritron AL-1500,Ameritron AL-82
Commander 2500

More pictures and details over email....  ki7iyd@...

Prices are good enough and willing to ship or meet up in my QTH


KI7IYD
Daniel L White
73


FT8 receiver kit on Choc Perfboard

Adam Rong
 

Gang,

I have been thinking about making a few board kits based on my Choc Perfboard for a while, and now here it is.

Basically it is designed for 20m FT8 frequency 14.074 MHz USB. There is a frequency fine tune and there is volume control. The antenna connector is an audio connector, but it is good for a 5 meter wire antenna for SW receiver. The audio output is mono, for audio connection to PC sound card input or headphone monitoring.

It is stable and you can receive a lot of signals, although it looks very simple. I am offering 5 kits for beta testers at $9.9, including all the parts on the board and the battery holder for 4x AA size batteries. You will be also receiving an audio cable for sound card connection. Of course, the air shipping is also included. Sign up for the beta testers offline.

Thanks,
Adam


Re: FT8 receiver kit on Choc Perfboard

Karl Heinz Kremer - K5KHK
 

Hi Adam, 

are all beta kits gone? :) If not, I would be interested in one. Let me know how to pay. 

Thanks and 73, Karl Heinz - K5KHK


Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...


On Tue, Apr 17, 2018 at 1:03 PM, Adam Rong rongxh@... [CHINA_QRP] <CHINA_QRP@...> wrote:
 

Gang,

I have been thinking about making a few board kits based on my Choc Perfboard for a while, and now here it is.

Basically it is designed for 20m FT8 frequency 14.074 MHz USB. There is a frequency fine tune and there is volume control. The antenna connector is an audio connector, but it is good for a 5 meter wire antenna for SW receiver. The audio output is mono, for audio connection to PC sound card input or headphone monitoring.

It is stable and you can receive a lot of signals, although it looks very simple. I am offering 5 kits for beta testers at $9.9, including all the parts on the board and the battery holder for 4x AA size batteries. You will be also receiving an audio cable for sound card connection. Of course, the air shipping is also included. Sign up for the beta testers offline.

Thanks,
Adam

>


>


Re: FT8 receiver kit on Choc Perfboard

Adam Rong
 

Thanks for your interest. You are in and we still have two beta kits remaining. Also, if you are interested in a wire antenna like this, you can add 5 USD.


Thanks,
Adam

在 2018年4月18日,上午1:18,Karl Heinz Kremer khk@... [CHINA_QRP] <CHINA_QRP@...> 写道:


Hi Adam, 

are all beta kits gone? :) If not, I would be interested in one. Let me know how to pay. 

Thanks and 73, Karl Heinz - K5KHK


Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...


On Tue, Apr 17, 2018 at 1:03 PM, Adam Rong rongxh@... [CHINA_QRP] <CHINA_QRP@...> wrote:
 

Gang,

I have been thinking about making a few board kits based on my Choc Perfboard for a while, and now here it is.

Basically it is designed for 20m FT8 frequency 14.074 MHz USB. There is a frequency fine tune and there is volume control. The antenna connector is an audio connector, but it is good for a 5 meter wire antenna for SW receiver.. The audio output is mono, for audio connection to PC sound card input or headphone monitoring.

It is stable and you can receive a lot of signals, although it looks very simple. I am offering 5 kits for beta testers at $9.9, including all the parts on the board and the battery holder for 4x AA size batteries. You will be also receiving an audio cable for sound card connection. Of course, the air shipping is also included. Sign up for the beta testers offline.

Thanks,
Adam

> 


> 




kits

Hasse
 

Hello Adam !

Long time since i wrote you an email and i hope Everything is fine with you.

Now my question.Whats new in the kit front? Do you have any interesting

Kits these Days ?I have not built any radios since i made the KNQ10A radiokit

I bought from you.I feel like starting a new Project now Adam.

Best 73 de sm6mpa/Hasse in Gothenburg-Sweden

 

Re: FT8 receiver kit on Choc Perfboard

haye Jean Louis
 

Hi I am also interested to test the FT8 kit, any kit left if please keep one for me,
73, ZS6AAG South africa

JLouis

Limited Time Offer: R3500D free shipping in May

Adam Rong
 

Gang,

For the assembled R3500D 80-meter ARDF receiver, you buy from http://crkits.com and you get free shipping in May. That is to say, you get one receiver at 39 USD including air shipping.

The R3500D kit is temporary out of stock but you can purchase from my distributors.

Thanks,
Adam

Efforts to ship faster

Adam Rong
 

Gang,

I have an over time job and I travel a lot for business. It explains why I ship less often and the average waiting time is long recently.

I made a bit change. I will store a few kits in the warehouse of my shipping agent, so once I receive order, I just give command like “ship parcel A to customer X” and my shipping agent will ship within 24~48 hours.

Currently I have these goods for faster shipping (and the list will change quickly):
FT8 20m receiver kit $9.9 including shipping
FT8 20m receiver kit with antenna $14.9 including shipping
R3500D ARDF receiver (assembled) $39 with free shipping in May
2x choc Perfboards with a metal case $15 each plus $7 shipping

Thanks,
Adam

Something new: HT-1A

Adam Rong
 

Gang,

This product will be released in about a month. It is designed by the designer of HB-1B and will be sold by crkits and distributors only. Mostly in assembled form, but I will offer a few kits with simple instruction manual in this group. You just need to solder a few through hole parts and I built mine in 2 hours. Let me know if you are interested. Price? Cheaper than the assembled radio.


Thanks,
Adam