|
Holiday project
Guys,
It is a traditional holiday Mid Autumn Festival, or Moon Cake Festival. I made a small project based on the book of JF1RNR, whom I met in person in Japan Ham
Guys,
It is a traditional holiday Mid Autumn Festival, or Moon Cake Festival. I made a small project based on the book of JF1RNR, whom I met in person in Japan Ham
|
By
Adam Rong
·
#2899
·
|
|
Rewind your Mini Wire Antenna
Folks,
There is a thread in an EFHW antenna Facebook group talking about our Mini Wire Antenna. K1RF Steve pointed out one thing that 2T:14T might not be good for a small size toroid, and it is
Folks,
There is a thread in an EFHW antenna Facebook group talking about our Mini Wire Antenna. K1RF Steve pointed out one thing that 2T:14T might not be good for a small size toroid, and it is
|
By
Adam Rong
·
#2898
·
|
|
Re: D4D receive light only activates during transmit
Well that doesn’t explain the green light coming on during transmit.
Well that doesn’t explain the green light coming on during transmit.
|
By
Steve Goyette
·
#2897
·
|
|
Re: D4D receive light only activates during transmit
Steve,
Apparently your green LED is polarity reversed.
Thanks,
Adam
在 2019年9月10日,上午11:52,qrpjl1kra <mx6s@...> 写道:
Steve,
Apparently your green LED is polarity reversed.
Thanks,
Adam
在 2019年9月10日,上午11:52,qrpjl1kra <mx6s@...> 写道:
|
By
Adam Rong
·
#2896
·
|
|
Re: D4D receive light only activates during transmit
Steve,
I saw your good soldering at a glance.
But usually this view deceived us. Check everything again.
>but once transmit is complete both lights go out.
Strange. I recommend check out voltages
Steve,
I saw your good soldering at a glance.
But usually this view deceived us. Check everything again.
>but once transmit is complete both lights go out.
Strange. I recommend check out voltages
|
By
qrpjl1kra
·
#2895
·
|
|
Re: D4D receive light only activates during transmit
Anyone have any ideas? Thinking I need to start by testing the transistors and work out from there.
Anyone have any ideas? Thinking I need to start by testing the transistors and work out from there.
|
By
Steve Goyette
·
#2894
·
|
|
Re: D4D receive light only activates during transmit
Hi Adam,
Here you go:
By
Steve Goyette
·
#2893
·
|
|
Re: D4D receive light only activates during transmit
Steve,
Please show me close look pictures of both sides.
Thanks,
Adam
Steve,
Please show me close look pictures of both sides.
Thanks,
Adam
|
By
Adam Rong
·
#2892
·
|
|
D4D receive light only activates during transmit
Hi,
I've built the 20m version of the D4D kit and when I connect it both lights come on then both lights go off after 1 second. Plugging into a computer I get received signals that are properly
Hi,
I've built the 20m version of the D4D kit and when I connect it both lights come on then both lights go off after 1 second. Plugging into a computer I get received signals that are properly
|
By
Steve Goyette
·
#2891
·
|
|
Re: Operation under emergency conditions
Thank you!
By
Dr. Pedro E. Colla (LU7DID)
·
#2890
·
|
|
Re: Operation under emergency conditions
Hi LU7DID,
If you really need to work at 5V, it is recommended to replace 78L05 by a LDO type 5V regulator.
For the TX amplifier, the output can be as low as 100-200mW if you power with 5V. You can
Hi LU7DID,
If you really need to work at 5V, it is recommended to replace 78L05 by a LDO type 5V regulator.
For the TX amplifier, the output can be as low as 100-200mW if you power with 5V. You can
|
By
Adam Rong
·
#2889
·
|
|
Operation under emergency conditions
Adam,
In a bare bones emergency situation to which extend the D4D works with a high capacity 5V pack as it's sole power supply? (assume connectors worked out properly).
¿Does the D4D work with
Adam,
In a bare bones emergency situation to which extend the D4D works with a high capacity 5V pack as it's sole power supply? (assume connectors worked out properly).
¿Does the D4D work with
|
By
Dr. Pedro E. Colla (LU7DID)
·
#2888
·
|
|
Re: D4D
My solution is a dual output (12 and 5V) Li-Ion battery pack similar size of D4D. Let me know if you guys are interested as it needs special shipping. The freight is higher.
Thanks,
Adam
在
My solution is a dual output (12 and 5V) Li-Ion battery pack similar size of D4D. Let me know if you guys are interested as it needs special shipping. The freight is higher.
Thanks,
Adam
在
|
By
Adam Rong
·
#2887
·
|
|
Re: D4D
I just picked up a 12 volt lithium ion battery pack from Amazon it is rated at 12 volt 11000 mAh. The size is just a little bit bigger then the D4D.
The battery comes with charger connecting cables.
I just picked up a 12 volt lithium ion battery pack from Amazon it is rated at 12 volt 11000 mAh. The size is just a little bit bigger then the D4D.
The battery comes with charger connecting cables.
|
By
tem494@...
·
#2886
·
|
|
Re: D4D
What’s a good battery system to run a RasPi4B and CRKits D4D?
Bret/N4SRN
What’s a good battery system to run a RasPi4B and CRKits D4D?
Bret/N4SRN
|
By
Charles Jessee
·
#2885
·
|
|
Re: FT8 1500/3000
Hi Adam,
I did the C5 105 addition in my build. Fortunately the IMD isn't too strong and WSJT-X can decode within 100 of the signals.I got my st QSO at 1235km on CQafter dark here - I'll spread the
Hi Adam,
I did the C5 105 addition in my build. Fortunately the IMD isn't too strong and WSJT-X can decode within 100 of the signals.I got my st QSO at 1235km on CQafter dark here - I'll spread the
|
By
Charles Jessee
·
#2884
·
|
|
Re: D4D
Thanks for sharing your experience. Considering the small size and low power consumption, field operations with raspberry pi is recommended. Autumn is coming and let’s go outside!
Thanks,
Adam
在
Thanks for sharing your experience. Considering the small size and low power consumption, field operations with raspberry pi is recommended. Autumn is coming and let’s go outside!
Thanks,
Adam
在
|
By
Adam Rong
·
#2883
·
|
|
Re: Just back from Japan Ham Fair
Hello Junichi-san,
I am very sorry in forget the pioneer demonstration of Mr. Kinoshita on Japan Ham Fair 2013
and I remember cjearly now his efforts to introduce for the very first time the
Hello Junichi-san,
I am very sorry in forget the pioneer demonstration of Mr. Kinoshita on Japan Ham Fair 2013
and I remember cjearly now his efforts to introduce for the very first time the
|
By
py1ahd
·
#2882
·
|
|
D4D
I also have just finished the kit did a set up with dummy load and put it on the air.
Receiving signals from all over have only made a few contacts with it but Antenna is located in the attic and had
I also have just finished the kit did a set up with dummy load and put it on the air.
Receiving signals from all over have only made a few contacts with it but Antenna is located in the attic and had
|
By
tem494@...
·
#2881
·
|
|
Re: New shipping rule
Bret,
It is quite fast considering it is not express shipping. I visited New England about 10 years ago when I was working for Sun Microsystems Inc. I did visit the HRO store in Salem and enjoyed the
Bret,
It is quite fast considering it is not express shipping. I visited New England about 10 years ago when I was working for Sun Microsystems Inc. I did visit the HRO store in Salem and enjoyed the
|
By
Adam Rong
·
#2880
·
|