Re: QP-7C: A new kit
Martin Peters
Yes, where are these choc boards available, please?
73 - Martin, G4EFE
|
|
Re: QP-7C: A new kit
Nigel Young ZL1NAY
This looks good Adam, well done and tiny, I will have to buy some of your choc boards.
On Wed, Apr 7, 2021 at 7:29 PM Adam Rong <rongxh@...> wrote:
--
Best Regards, Nigel Young
|
|
Re: QP-7C: A new kit
Adam Rong
toggle quoted messageShow quoted text
在 2021年4月7日,上午10:53,Nigel Young <multilec@...> 写道:
|
|
Re: QP-7C: A new kit
Nigel Young ZL1NAY
Well, come on Adam, give us a sneak preview. Not everyone gets the sprat magazine. I don't think it gets much simpler than the MRX unless you go for a Regen receiver. Kia Kaha
On Wed, Apr 7, 2021, 1:03 PM Adam Rong <rongxh@...> wrote:
|
|
Re: QP-7C: A new kit
Adam Rong
Thanks BG2KAJ. The MRX-40 is definitely a classic. My solution will be something on one unit of my Choc board. Yes, the LCR designed by myself which is published on Sprat #184.
toggle quoted messageShow quoted text
Thanks, Adam
在 2021年4月6日,下午3:23,Jizhuang Ma <bg2kaj@...> 写道:
|
|
Re: QP-7C: A new kit
Jizhuang Ma
Hi
I'm not Adam but I thought MRX-40 would be a good choice. Article about MRX-40 on ARRL website:http://www.arrl.org/files/file/Technology/pdf/99759.pdf BG2KAJ Ma
|
|
Re: QP-7C: A new kit
Cierra
Thanks for the update Adam! What receiver kit would you recommend to go with this transmitter?
|
|
Re: QP-7C: A new kit
Adam Rong
Hi VU3MUG,
toggle quoted messageShow quoted text
The price will be announced later on the formal release date. It is a small kit so the price is not high. Thanks, Adam, BD6CR
|
|
Re: QP-7C: A new kit
Ishwar Rao Sutrave <vu3mug@...>
Hi what will be the cost VU3MUG india
On Sun, 4 Apr 2021, 9:04 am Adam Rong, <rongxh@...> wrote: You can refer to the manual in English to learn more about the classic ROSE kit. BTW, the original kit was released in the year that I was born.
|
|
Re: QP-7C: A new kit
Adam Rong
You can refer to the manual in English to learn more about the classic ROSE kit. BTW, the original kit was released in the year that I was born.
http://www.mizuhoradio.org/manuals/QP-7/qp721a.pdf Thanks, Adam
|
|
QP-7C: A new kit
Adam Rong
Folks,
QP-7C is a CW transmitter kit of 3 transistors. It is a replica of the classic MIZUHO QP-7 on three units of my Choc Perfboard. Besides a few solder bridges on the bottom side, there is no need for additional jumpers. The output is more than 3 watt at 12V and the spectrum purity is -53 dBc or better. Even you use with 8.4V batteries, you still can expect 1 watt RF output which is ideal for outdoor operations with a small receiver. The heat sink is not too hot even I transmit for a long time. Please stay tuned for more information. Thanks, Adam
|
|
Re: Now back to normal
Adam Rong
Hi Graeme,
You can refer to the information on my web store at http://crkits.com/ You can PayPal directly to rongxh@... and leave your ship-to-address. If you don't need express shipping, you can save a few dollars. Thanks, Adam
|
|
Re: Now back to normal
graemea58@...
Hi Adam, Good news you are back. I'm am in Australia trying to order a CV-40V complete kit. How do I order and pay for this? Best regards, Graeme Anderson
On Wed, 31 Mar. 2021, 11:38 Adam Rong, <rongxh@...> wrote: Folks,
|
|
Now back to normal
Adam Rong
Folks,
I have just completed moving and am ready to get back to normal. Currently, I have the following kits in stock. CS-40V SSB Transceiver Kit with Speaker Microphone R3500D 3.5-3.6MHz ARDF Receiver Kit CRK-10A CW Transceiver Kit D4D and Mini Wire Antenna kits will be resumed shortly. Thanks, Adam
|
|
Re: Using D4D for Hellschreiber?
Carl Weiberg
I bought crystals to change the unit to WSPR but was told the frequency stability would be an issue to just install crystals.
toggle quoted messageShow quoted text
iPhone Aloha
On Mar 23, 2021, at 9:44 AM, Cierra <dubosec@...> wrote:
-- CW
|
|
Re: Using D4D for Hellschreiber?
Yeah. I was hoping for something along these lines, but I deleted my initial post because I figured with the crystal it would be difficult without additional hardware, like the keyer mentioned in the article.
|
|
Re: Using D4D for Hellschreiber?
Jizhuang Ma
HI Sending everything that goes into the audio port is possible though you have to modify the xtal to another freq as F6GWE said. Ma BG2KAJ
|
|
Re: Using D4D for Hellschreiber?
F6GWE
Hello
On FT8 fréquency???
73
Patrick
F6GWE
De : crkits@groups.io <crkits@groups.io> de la part de Cierra <dubosec@...>
Envoyé : lundi 22 mars 2021 18:30 À : crkits@groups.io <crkits@groups.io> Objet : [crkits] Using D4D for Hellschreiber? Greetings, I am on the verge of finishing my D4D 40m kit, and I am curious if connected to the correct software, could I use the D4D to transmit and receive Hellschreiber? Thanks, Cierra KN4LIA
|
|
Re: KN-990 reselling
tomv <mnv73@...>
Ham radio crash course video indicates that he got a b version
https://youtu.be/HOqWGweGBpw
|
|
Re: KN-990 reselling
Adam Rong
The B version is not yet shipped. I worked with the designer on the English menu and it is more friendly now. Also, the AM bandwidth is wider for AM broadcast, and the AGC response is much improved. If you have not updated the firmware, you can do it now.
toggle quoted messageShow quoted text
Thanks, Adam
在 2021年3月15日,上午11:10,tomv via groups.io <mnv73@...> 写道:
|
|