Date   
Re: Assembled HT-1A from USA location

John
 

Yes that is what I needed. Would you happen to have the procedure for winding T1. I know about the twisted pair and the other wire but not sure how they are wound together.
Thank you for your help.

John K2JHU...

On Thu, Nov 7, 2019 at 1:33 PM John via Groups.Io <johnk2jhu=gmail.com@groups.io> wrote:
Actually I am talking about the  D4D. Sorry

John K2JHU...

On Thu, Nov 7, 2019 at 1:30 PM John via Groups.Io <johnk2jhu=gmail.com@groups.io> wrote:
Hi Conor. I have the parts list and for the 20 meter parts portion it list L2 and L3 but only shows the wire length not the number of turns. In the actual manual for step 5 it shows 16 turns with a note it is for the 40 meter unit.

On Thu, Nov 7, 2019 at 11:59 AM Conor Farrell <conchobhair.ofearghail@...> wrote:
Hi John,

Is there an Excel spreadsheet with the components listed? There is for the D4D so I assume this will be the same: check the spreadsheet for the exact components for your model, and it will tell you how many turns to wind on the coils.

Conor

On Thu, 7 Nov 2019, 03:50 John, <johnk2jhu@...> wrote:
Good day sir. I have a question regarding L2 and L3. In the manual I downloaded it says
 "Wind toroids for L2 and L3 as following picture, it shows 16 turns for 40m". How many turns for
20 meters.

John K2JHU...

On Sat, Nov 2, 2019 at 6:58 PM Adam Rong <rongxh@...> wrote:
John,

I have an over time and full time job, so the shipping will be every Monday. Your rig will be shipped next Monday via EMS, and after shipment, the tracking number will be updated in PayPal.

Thanks,
Adam

在 2019年11月3日,上午1:56,John <johnk2jhu@...> 写道:


Hi Adam. Just wondering if you have any idea when my rig will be shipped. 

John K2JHU...

On Thu, Oct 31, 2019 at 1:20 PM John Dorson <johnk2jhu@...> wrote:
Adam the funds are on their way.

John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

Conor Farrell
 

Okay, I checked my D4D parts list. For 20m it's 11 turns of 20cm of wire for both L2 and L3. I've attached the screenshot: hope that helps!

Conor

On Thu, 7 Nov 2019, 10:33 John, <johnk2jhu@...> wrote:
Actually I am talking about the  D4D. Sorry

John K2JHU...

On Thu, Nov 7, 2019 at 1:30 PM John via Groups.Io <johnk2jhu=gmail.com@groups.io> wrote:
Hi Conor. I have the parts list and for the 20 meter parts portion it list L2 and L3 but only shows the wire length not the number of turns. In the actual manual for step 5 it shows 16 turns with a note it is for the 40 meter unit.

On Thu, Nov 7, 2019 at 11:59 AM Conor Farrell <conchobhair.ofearghail@...> wrote:
Hi John,

Is there an Excel spreadsheet with the components listed? There is for the D4D so I assume this will be the same: check the spreadsheet for the exact components for your model, and it will tell you how many turns to wind on the coils.

Conor

On Thu, 7 Nov 2019, 03:50 John, <johnk2jhu@...> wrote:
Good day sir. I have a question regarding L2 and L3. In the manual I downloaded it says
 "Wind toroids for L2 and L3 as following picture, it shows 16 turns for 40m". How many turns for
20 meters.

John K2JHU...

On Sat, Nov 2, 2019 at 6:58 PM Adam Rong <rongxh@...> wrote:
John,

I have an over time and full time job, so the shipping will be every Monday. Your rig will be shipped next Monday via EMS, and after shipment, the tracking number will be updated in PayPal.

Thanks,
Adam

在 2019年11月3日,上午1:56,John <johnk2jhu@...> 写道:


Hi Adam. Just wondering if you have any idea when my rig will be shipped. 

John K2JHU...

On Thu, Oct 31, 2019 at 1:20 PM John Dorson <johnk2jhu@...> wrote:
Adam the funds are on their way.

John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

John
 

Actually I am talking about the  D4D. Sorry

John K2JHU...

On Thu, Nov 7, 2019 at 1:30 PM John via Groups.Io <johnk2jhu=gmail.com@groups.io> wrote:
Hi Conor. I have the parts list and for the 20 meter parts portion it list L2 and L3 but only shows the wire length not the number of turns. In the actual manual for step 5 it shows 16 turns with a note it is for the 40 meter unit.

On Thu, Nov 7, 2019 at 11:59 AM Conor Farrell <conchobhair.ofearghail@...> wrote:
Hi John,

Is there an Excel spreadsheet with the components listed? There is for the D4D so I assume this will be the same: check the spreadsheet for the exact components for your model, and it will tell you how many turns to wind on the coils.

Conor

On Thu, 7 Nov 2019, 03:50 John, <johnk2jhu@...> wrote:
Good day sir. I have a question regarding L2 and L3. In the manual I downloaded it says
 "Wind toroids for L2 and L3 as following picture, it shows 16 turns for 40m". How many turns for
20 meters.

John K2JHU...

On Sat, Nov 2, 2019 at 6:58 PM Adam Rong <rongxh@...> wrote:
John,

I have an over time and full time job, so the shipping will be every Monday. Your rig will be shipped next Monday via EMS, and after shipment, the tracking number will be updated in PayPal.

Thanks,
Adam

在 2019年11月3日,上午1:56,John <johnk2jhu@...> 写道:


Hi Adam. Just wondering if you have any idea when my rig will be shipped. 

John K2JHU...

On Thu, Oct 31, 2019 at 1:20 PM John Dorson <johnk2jhu@...> wrote:
Adam the funds are on their way.

John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

John
 

Hi Conor. I have the parts list and for the 20 meter parts portion it list L2 and L3 but only shows the wire length not the number of turns. In the actual manual for step 5 it shows 16 turns with a note it is for the 40 meter unit.

On Thu, Nov 7, 2019 at 11:59 AM Conor Farrell <conchobhair.ofearghail@...> wrote:
Hi John,

Is there an Excel spreadsheet with the components listed? There is for the D4D so I assume this will be the same: check the spreadsheet for the exact components for your model, and it will tell you how many turns to wind on the coils.

Conor

On Thu, 7 Nov 2019, 03:50 John, <johnk2jhu@...> wrote:
Good day sir. I have a question regarding L2 and L3. In the manual I downloaded it says
 "Wind toroids for L2 and L3 as following picture, it shows 16 turns for 40m". How many turns for
20 meters.

John K2JHU...

On Sat, Nov 2, 2019 at 6:58 PM Adam Rong <rongxh@...> wrote:
John,

I have an over time and full time job, so the shipping will be every Monday. Your rig will be shipped next Monday via EMS, and after shipment, the tracking number will be updated in PayPal.

Thanks,
Adam

在 2019年11月3日,上午1:56,John <johnk2jhu@...> 写道:


Hi Adam. Just wondering if you have any idea when my rig will be shipped. 

John K2JHU...

On Thu, Oct 31, 2019 at 1:20 PM John Dorson <johnk2jhu@...> wrote:
Adam the funds are on their way.

John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

Conor Farrell
 

Hi John,

Is there an Excel spreadsheet with the components listed? There is for the D4D so I assume this will be the same: check the spreadsheet for the exact components for your model, and it will tell you how many turns to wind on the coils.

Conor

On Thu, 7 Nov 2019, 03:50 John, <johnk2jhu@...> wrote:
Good day sir. I have a question regarding L2 and L3. In the manual I downloaded it says
 "Wind toroids for L2 and L3 as following picture, it shows 16 turns for 40m". How many turns for
20 meters.

John K2JHU...

On Sat, Nov 2, 2019 at 6:58 PM Adam Rong <rongxh@...> wrote:
John,

I have an over time and full time job, so the shipping will be every Monday. Your rig will be shipped next Monday via EMS, and after shipment, the tracking number will be updated in PayPal.

Thanks,
Adam

在 2019年11月3日,上午1:56,John <johnk2jhu@...> 写道:


Hi Adam. Just wondering if you have any idea when my rig will be shipped. 

John K2JHU...

On Thu, Oct 31, 2019 at 1:20 PM John Dorson <johnk2jhu@...> wrote:
Adam the funds are on their way.

John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

John
 

Good day sir. I have a question regarding L2 and L3. In the manual I downloaded it says
 "Wind toroids for L2 and L3 as following picture, it shows 16 turns for 40m". How many turns for
20 meters.

John K2JHU...

On Sat, Nov 2, 2019 at 6:58 PM Adam Rong <rongxh@...> wrote:
John,

I have an over time and full time job, so the shipping will be every Monday. Your rig will be shipped next Monday via EMS, and after shipment, the tracking number will be updated in PayPal.

Thanks,
Adam

在 2019年11月3日,上午1:56,John <johnk2jhu@...> 写道:


Hi Adam. Just wondering if you have any idea when my rig will be shipped. 

John K2JHU...

On Thu, Oct 31, 2019 at 1:20 PM John Dorson <johnk2jhu@...> wrote:
Adam the funds are on their way.

John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Winter is coming

Bryan Corkran, VK3KEZ
 

Speak for yourself. Not in VK land !

Winter is coming

Adam Rong
 

Folks,

It will be great time to try 80m. Remember, we have the 80m version of D4D.

Thanks,
Adam

Re: Assembled HT-1A from USA location

John
 

Thank you and have a great week.

John K2JHU...

On Sat, Nov 2, 2019 at 6:58 PM Adam Rong <rongxh@...> wrote:
John,

I have an over time and full time job, so the shipping will be every Monday. Your rig will be shipped next Monday via EMS, and after shipment, the tracking number will be updated in PayPal.

Thanks,
Adam

在 2019年11月3日,上午1:56,John <johnk2jhu@...> 写道:


Hi Adam. Just wondering if you have any idea when my rig will be shipped. 

John K2JHU...

On Thu, Oct 31, 2019 at 1:20 PM John Dorson <johnk2jhu@...> wrote:
Adam the funds are on their way.

John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Use scope to check audio input level to D4D?

Adam Rong
 

If you don’t have RF test equipment like spectrum analyzer, you can use WSJTx spectrum to make rough judgements. Transmit with D4D and receive with other rig and observe the received spectrum. The overtones in audio range will reflect the distortion.

You will have to find a balance. The recommended modifications will give you good balance.

Thanks,
Adam

在 2019年11月3日,上午6:12,Jim WB2LHP in MI <jmarco1955@...> 写道:


I've been working on this issue also Adrian...Right now I'm testing two solutions...The first is to incorporate the KD1JV resistive divider mod...I use a 33K/1K combo to get the level I want...The other is simpler...Replace C6 with a 0.1uf cap and C5 with a 10uf electrolytic...This capacitive divider ratio should accomplish the same thing and keep the mixer from saturating...Expect your power output to be significantly lower but with much greater spectral purity...Without the mods, the signal is about 75KHz wide!...I'll report on my testing later after I have access to the spectrum analyzer and wattmeter again...Jim  WB2LHP

On Sat, Nov 2, 2019 at 5:53 PM Adrian Boyko <adrianboyko@...> wrote:
Hi All. I'm curious if there's a point in the D4D circuit that would allow for an easy check of the input audio level using just an oscilloscope. Can one look for clipping (or some other symptom) that indicates an overload of the D4D's audio input circuitry? I realize that it's possible to look at the RF output for signs of trouble but I'm wondering if it's possible to do so further upstream in the circuit.

Re: Assembled HT-1A from USA location

Adam Rong
 

John,

I have an over time and full time job, so the shipping will be every Monday. Your rig will be shipped next Monday via EMS, and after shipment, the tracking number will be updated in PayPal.

Thanks,
Adam

在 2019年11月3日,上午1:56,John <johnk2jhu@...> 写道:


Hi Adam. Just wondering if you have any idea when my rig will be shipped. 

John K2JHU...

On Thu, Oct 31, 2019 at 1:20 PM John Dorson <johnk2jhu@...> wrote:
Adam the funds are on their way.

John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Use scope to check audio input level to D4D?

Jim WB2LHP in MI
 

I've been working on this issue also Adrian...Right now I'm testing two solutions...The first is to incorporate the KD1JV resistive divider mod...I use a 33K/1K combo to get the level I want...The other is simpler...Replace C6 with a 0.1uf cap and C5 with a 10uf electrolytic...This capacitive divider ratio should accomplish the same thing and keep the mixer from saturating...Expect your power output to be significantly lower but with much greater spectral purity...Without the mods, the signal is about 75KHz wide!...I'll report on my testing later after I have access to the spectrum analyzer and wattmeter again...Jim  WB2LHP

On Sat, Nov 2, 2019 at 5:53 PM Adrian Boyko <adrianboyko@...> wrote:
Hi All. I'm curious if there's a point in the D4D circuit that would allow for an easy check of the input audio level using just an oscilloscope. Can one look for clipping (or some other symptom) that indicates an overload of the D4D's audio input circuitry? I realize that it's possible to look at the RF output for signs of trouble but I'm wondering if it's possible to do so further upstream in the circuit.

Use scope to check audio input level to D4D?

Adrian B
 

Hi All. I'm curious if there's a point in the D4D circuit that would allow for an easy check of the input audio level using just an oscilloscope. Can one look for clipping (or some other symptom) that indicates an overload of the D4D's audio input circuitry? I realize that it's possible to look at the RF output for signs of trouble but I'm wondering if it's possible to do so further upstream in the circuit.

Re: Assembled HT-1A from USA location

John
 

Hi Adam. Just wondering if you have any idea when my rig will be shipped. 

John K2JHU...

On Thu, Oct 31, 2019 at 1:20 PM John Dorson <johnk2jhu@...> wrote:
Adam the funds are on their way.

John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

Jim WB2LHP in MI
 

I don't own the HT-1A...I bought and built the D4D FT8 radio...I applied the recommended mods and it works very well...It will be my QRP Field Day rig using a solar panel and battery...Great quality and you can't beat the price...Jim

On Thu, Oct 31, 2019 at 1:22 PM John <johnk2jhu@...> wrote:
Jim I just order he rig.So how well do you like the rig. Any thing I should know up front.
John K2JHU...

On Thu, Oct 31, 2019 at 12:43 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

John
 

Jim I just order he rig.So how well do you like the rig. Any thing I should know up front.
John K2JHU...

On Thu, Oct 31, 2019 at 12:43 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

John
 

Adam the funds are on their way.

John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

John
 

OK Adam. I will place my order today for the assembled  HT-1A.
Thank you.
John K2JHU...

On Thu, Oct 31, 2019 at 1:05 PM Adam Rong <rongxh@...> wrote:
Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

Adam Rong
 

Correct. I am in Shanghai China. I can ship via EMS express shipping.

Thanks,
Adam

在 2019年11月1日,上午12:43,Jim WB2LHP in MI <jmarco1955@...> 写道:


No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...

Re: Assembled HT-1A from USA location

Jim WB2LHP in MI
 

No...He is in China I believe...

On Thu, Oct 31, 2019 at 12:23 PM John <johnk2jhu@...> wrote:
Thanks you Jim. Are they the ones in the UK.

John K2JHU...

On Thu, Oct 31, 2019 at 12:17 PM Jim WB2LHP in MI <jmarco1955@...> wrote:
I also got no response from the US seller...Went instead to the designer and ordered direct...It was here in 2 weeks which I thought was very reasonable...I would order directly from CR Kits...

On Thu, Oct 31, 2019 at 11:44 AM John <johnk2jhu@...> wrote:
I have sent 2 e-mails to the USA site asking if they have any assembled radios with no response. I would really like one of these radios and thought shipping from US location would result in a faster shipping time. Or should I just forget them and order from another location.

John K2JHU...