Re: 14.070.0 not pulling to 14.074.0 for the 20 meter DSB

Steven Weber

Capacitive loading lowers the crystal frequency, which are typically the two caps on the SA602/612 pins 6 and 7.  But if you have a 14.070 crystal but really want to be on 14.074, you need to put a capacitor in series with the  crystal to rise it’s frequency. This is best done with a trimmer cap, a 30pfd trimmer cap would likely do the trick.


Steve KD1JV


Hi all. Hoping someone can advise me what causes the pulling of the 14.070.0 crystal to 14.074.0 In step 3 of the manual it states by adding a wire to the antenna termanual of your transceiver and placing the DSB board near the wire you can zero beat to confirm the frequency. The zero beat approach works fine except my unit in on 14.070.0 the crystal frequency, not the pulled 14.074.0. I don't know what actually pulls the frequency so if anyone can help me with this I truly would appreciate it. Thanks for your time.


John K2JHU...


Join to automatically receive all group messages.