Re: d4d off frequency

Adam Rong


Since the info is limited, I have to guess.

I suppose you have calibrated K2 frequency. Please confirm you did like one of these ways:
1. Use zero beat to test the carrier leakage from the D4D oscillator.
2. If you send 1500 Hz audio into D4D and triggered VOX, your K2 should zero beat two most strong frequencies at 14.0755 and 14.0725 MHz.
3. Send FT8 signal and receive in K2 and compare the audio frequency delta.


On Tuesday, August 6, 2019, ron mcmurray <hamshack@...> wrote:
i used my k2 to measure it.

Adam Rong

Join to automatically receive all group messages.