Re: Video Upload: Build a Simple RX
toggle quoted message. . .
Thanks Adam and Merry Christmas !
On 8:37PM, Mon, Dec 24, 2018 Adam Rong <rongxh@...
It depends on the load capacitor of the crystal and the mode. The normal load cap is 20 pF, and if you want to receive SSB, you will need to pick two caps to oscillate on the exact marked frequency. If you receive CW, you will need to oscillate a bit off to give you right tone pitch. In my case, I used 39 and 68 to give 700 Hz lower than 7010 crystal with 20 pF load capacitor.
What value are the two caps at pins 6 & 7?
On 9:39AM, Sat, Dec 22, 2018 Adam Rong <rongxh@...
See this video:
Join email@example.com to automatically receive all group messages.