Re: Troubleshooting the CS-40

John VA7JBE
 

Thanks for the advice.  I traced back and found an old fix that I did about 2 months ago (when I last worked on the kit.)  One of the leads for the crystal in the single pole IF amp filter had broken off during shipping and I had bridged it with a jumper.  I removed the jumper and the voltages are pretty close to where they should be:

Pin   Volts
1      1.35
2      1.22
3      0
4      5.87
5      6.8
6      7.33
7      7.27
8      8

Still not sure whats up with the relays, but I'm thinking of ordering some new ones when I order a new IF filter crystal.

John VA7JBE

Join crkits@groups.io to automatically receive all group messages.