Does it need to be elastic? We just used regular ribbon strung through each side of the mask and tied it in back when wearing.

Probably anything 1/4” - 1/2” would be helpful. Wes

What size do you need? Sent from my Samsung Galaxy smartphone.

Hello everyone, My Wife works for Courage Connection, the Champaign-Urbana domestic violence shelter. They have someone making masks for them but they are short on elastic. Osj (my wife) checked the

Was going to do this about five years ago but never got around to it. These tubes and the NC are among the things we got out of the warehouse last year. Saved me about $32! Yes it is an upscale

Got it, total is $34. Christopher Brian Deem NAR 12308 TRA 2256 level 2 Gary Slater wrote:

It’s a 38mm tube 7” long. 6”x6” is what Wildman recommends for up to 2” tube. I can get the chute fully wrapped if I fold the chute tighter. I always run cellulose insulation with nomex. I

Yeah, I usually put in some wadding too. Jonathan

Some of the parachute protectors I've bought reccomend a little dog barf on top of the motor. I guess to catch the burning particles. Sent from my Samsung Galaxy smartphone.

Some places suggest sizes of chute protectors based on the size of the body tube. My impression is that this would be useful for the case where you are using the protector in much the same manner we

Ya, I can't remember what diameter your rocket is, but I use chute protectors most of the time on my 3" + rockets and the smallest I use is 12" square. Wes

I'll send the video to Gary. It is possible that the large attachment caused the email to be blocked by his email provider. Jonathan

You probably want to use a larger chute protector in future. Most people try to get the whole chute inside the "burrito". As you discovered any part of the chute that isn't covered can be exposed to

For some reason, I did not get Dan's email with the video nor do I see in subsequent replies. Anyone?

Johnathan, Yes it is a fly away guide. I’m running a 6”x6” chute protector and dog barf anywhere I got a void which was about one caliber of space. I only burrito wrapped the aft portion chute

Were you using a fly-away rail guide? I think I saw something like that just after launch. Jonathan

Nice, I remember when we used to launch rockets back in the pre-plague years. Sent from my Samsung Galaxy smartphone.

What size chute protector did you use? If you don't wrap your chute up well you can get powder burns like you mention. Jonathan

I finished my ground test and got a flight in on a G53 this weekend. I ended up extending my drogue harness to 20’ and running my 12’ on the main. .75grams on drogue and .5 grams on the main.

In that case Chris, I will take 2 two packs of C12-6's, and two packs of D16-6's.