Hello I have a server netra ultrasparc 2 and has running debian etch 4.0 to the architectura is sparc linbpq old that can compile the gcc is version 4.1.2 20061115 greetings

Hello all Has anyone noticed when using MH Port Number the timing seems to be way off as well as having too many charters in the from of the time? 73 Mike Melnik-N9PMO BPQ32 Groups.io Group Moderator

Has there been any change in the way BPQ32 handles internet outages? HB9AK is using RMS Relay to store received messages during internet outages. In recent months, this does not work anymore. BPQ only

Howdy. . . . . This may not be a memorable moment for the subject but it IS for me. Without going into a lot of detail about Windows issues on a computer, I was placed in a position of finally facing

So I have searched the groupsio to find examples or to help my learning to put it all together with examples of the following ; LINBPQ is a Linux version of the BPQ32 Node, BBS and Chat Server compone

The Node Map uses UDP port 81 and the Chat Map UDP 10090 73, John On 25/02/2021 03:50, Frank KO4FQW wrote: Hate to hijack, but does anyone know the port and address LinBPQ uses to update the BPQ and C

One of my locals (kn4orb) is writing a Raspberry PI Python program which interfaces with CHAT. He's telnetting from a Python app on the Raspberry PI to pilinbpq on the same PI to address 127.0.1.1 and

Hello group, Yes so I have to say I days old to all of this, I am interested in a service called "winlink", I would like to setup it all (server/client) up, I would like to setup the "server" and the

It appears that the msgtypes does not work when using VARA for HF, unless I have it in the script wrong ? This script connects just fine , but does not limit the size of bulletins sent. IDLETIME 60 AT

Hello! New BPQ user here. I'm working on getting a BPQ32 installation up and running using WinRPR. I have a VARA license as well so VARA too. Anyway, I'm running into an issue with the WinRPR driver.

Good afternoon y'all I cant get the HAT version to work. I flashed the teensy with the StandAlone firmware and tested USB, and i can communicate with it. I want it to work as a hat though. I did the f

Anyone running a TS590S with bpq32 windows ver .26 ! What menu settings have to be changed or turned on in the radio ? TNX Ray N3HYM

I am in the process of building a dual port Winlink gateway based on linbpq with 2 different VARAFM TNCs and 2 CM108 based soundcards. I have found that the CM108 support seems to currently assume the

I have used the terminal in linbpq. However it exhibits some strange behavior. Every time I enter something in the command line at the bottom of the terminal or the terminal receives some data the win

In PiLinBPQ in the web interface when I select "Ports" and then "Beacons" on any port, I get the message above saying I need to be signed in to save changes. I get this message even after signing in a

Hello, I am having an issue where my beacon only transmits on AXIP. Is there script in the cfg file I need to massage to make it work on my HF port (port 1) . Thanks, Brian WD9HXC

Hello, I want to 'advertise' a local VHF packet node & BBS (running on 144.875 MHz) by adding another VHF port on 144.800 MHz (APRS-only) where I just want it to send APRS beacons (GPS position) once

I know this has been posted before but the messages there don't seem to apply to my situation and confused me as to what exactly was being suggested. My system is a Raspberry Pi 4B using the HamPi env

I recently upgraded to Windows BPQ 6.0.21.1 and find frequently that after a connect attempt fails or a connection is dropped, BPQ thinks the connection is still active. When attempting to manually in

Hi John, After downloading pilinbpq, dated 02-18-2021, it says it is looking for libconfig.so.9 and fails to start. The beta version dated the 15th of Feb is working fine. Just wondering if I download