I’m needing a thickness measurement of the feed slide nut washer part number 932-041. This was from my 10in. lathe and I discovered that it was missing one part , the slide washer. I really don’t want

Anyone looking for a decent QC54 Atlas mounted on a welded steel bench. I have one that has been sitting in the shop for a few years. Lots of new parts includes a 3-jaw Shars chuck and a 4-jaw Craftsm

I need some feedback please. Attempting to create a milling attachment that will allow me to rotate pieces that require circular milling. Please do not reply with the fact that I should obtain a milli

Does anyone know where the S7-163 3/8" ID flat washer with the anti-rotation tab on the ID might be purchased? I finally located a picture of the washer I need, but there were no dimensions given so I

Hey just found this forum. I'm dewey from Saskatchewan. I recently bought an atlas 109 lathe and kinda forgot to give it the care and attention it needs. As a result, I managed to destroy the spindle

I agree that the best thing to do with 6” gears is to find someone with a 6” who needs them. Besides having to bore out the hubs, you will also have to make spacers before you can use them on a 10F 0r

So I have two sets of gears that are with the atlas lathes that belonged to my father. one appears to be a metric set for a Atlas 6 and a set of gears that’s look like the set for a 10” is there any r

Not sure if this is appropriate to this group, as the Craftsman horizontal bandsaw is made by Covel, not Atlas, but since there are other references to it in some of the other messages I’ll throw this

Found an issue on my Craftsman 12" 101.07401 old girl. The face cut isn't flat all the way across. So I was trueing up an approx 5 1/2" backplate for a chuck, made of cast iron. After turning I decide

you know the rules , not mine https://sfbay.craigslist.org/nby/tls/d/vineburg-lathe/7610441278.html animal

Yea , I've seen TbT before & his fiddle playin is up there with the best . The bulk of my listening these days is Americana & JamGrass . Tons of great fiddlers in that area . I am a huge fan of 60's f

Hi I am finally getting my atlas lathe ready to go. I am about to take the apron off and check things out the half nut lever and the half nuts don't seem to be engaging right. The lathe is a 101.07403

We spend so much time talking about our machines, I wonder if anyone ever makes/fixes anything. I thought it might be interesting if everyone posts a picture of their most recent project be it big and

Hello All, First of all, this is not intended to revive the long-standing belt debate. I think we've all heard enough of that lately. I'm writing to ask for assistance in finding a replacement belt fo

I know "some people" absolutely hate the idea of using a Tool Post Grinder. Especially because of the mess. Well I "think" I can prepare for the mess and be able to deal with it. With that being said,

Hello to all! I have an addiction and want to be straight about it. Over thirty years ago a collection of Atlas/Craftsman metal working tools was started. The idea of a complete metal shop with 1/2 ho

If anyone would like to have two Honda 205 Dreams and a Honda 50 to take apart for parts as Mike suggests, contact me directly at jejennings@.... All from the 1960's and none are in running condition

Agreed. I had heated seats in the BMW. I don't miss them now, because I selected cloth seats for the truck, so I don't have to deal with leather seats. I find them terribly hot in summer and even more

Here is a view of my Direct Drive Spindle gears with the motor rolled out of the way. https://photos.app.goo.gl/pwWjYSgTiMz122kH6 I am using the 36A gear as the intermediate. https://photos.app.goo.gl

Sigh, Trying to take the lower pully off the shaft on my 3990 under drive lathe (to get to the belt tensioner that is right behind it), I managed to break the pully (cracked 2 spokes off) - Anyone kno