toggle quoted messageShow quoted text
My P800 uses the 17” film
To ensure the front edge is sensed every time I run a black marker pen along the front edge -1/8” line
Works well for me
Working on the go on a screen keyboard - forgive minor errors, please
The big errors you should challenge
On 2 Sep 2021, at 15:34, Carlos Alejandro, <carlos@...> wrote:
I just got off the phone with Epson regarding their SC P-900 printer. It does NOT have a sensor for Over Head Transparency film. The only way it works, is what I have been doing which is gluing a strip of paper to the first feed end.
I am trying to print 16” wide image on a 17” roll, it will only print 13” of the 16” image… it cuts it off.
Is anyone using a different Transparency other than Pictorico that works?
After I find a workaround for this, I will call the manufacturers to see if they know how to deal with this problem.
The printer is great… but NOT for vellum or transparency films.
Carlos Alejandro Photography
m 302.547.7799 www.caphoto.com
On Jul 31, 2021, at 3:59 PM, Carlos Alejandro, <carlos@...
Thank you, Debbie! I will try that. I am about to print a show in multiple media and am kind of dreading the “fun” of this aspect.
On Jul 31, 2021, at 3:49 PM, Debbie Warren, <dmw0529@...> wrote:
Hi Carlos, I had some similar problems with my P800, and Epson essentially said I was using an unapproved paper. My 2880 worked perfectly. Finally I spoke with someone in the wide format group and they were very helpful. They replaced my printer and I haven’t had any further issues after several years. They said to always ask to speak to someone in the pro/wide format area. Just FYI in case you haven’t tried that route yet. Good luck.
...,poorly typed with often unintelligible word substitutions.
On Jul 31, 2021, at 3:34 PM, Carlos Alejandro, <carlos@...> wrote:
I have had so many problems with the P900 with pictórico and vellum. Epson replaced my first machine saying they’ve never had the problem. Second machine is the same. Works for a while… out of the box… then paper jam… and there is no paper jam. Doesn’t recognize material. I ended spray mounting a 2” strip to the vellum and then it worked. I never had this problem with my R2880. Epson basically blew me off.
No. Even if it is an issue there are fixes for it
Curve Calculator III for the Mac is Now Available
sent from my iPhonetypeDeviceThingy
Not sure. The info I found was vague. It sounded like the printer didn't recognize the transparency film as a medium. Have you heard
of this kind of problem with an Epson P700?