Topics

Notes on talking DMM

frank cuta
 

You need to remove one screw FROM THE BATTERY COVER
As you install the battery from the rear the it goes in right side up with
the posative pole on the left

On face of meter:

Top button on left is hold/select
Button on left is true/average

Here are the settings on the 28 position rotary knob
The initial value is the number of clicks clockwise from noon

Noon off
1 Hfe
2 200mV dc
3 2 vdc
4 20 vdc
5 200 vdc
6 1000 vdc
7 750 volts / hertz
8 200 vac
9 20 vac
10 2 vac
11 20 uA dc
12 2 mA dc
13 20 mA dc
14 200 mA dc
15 10 amps dc
16 10 amps ac
17 200 mA ac
18 20 mA ac
19 NCV (electric field sensor)
20 diode power on test
21 200 ohms
22 2 kohms
23 20 kohms
24 200 kohms
25 2 meg ohms
26 20 meg ohms
27 Capacitance 20 mF

probe connections left to right:
10 amps
Milli Amps
Common
Volts/ohms/hertz



https://www.mpja.com/Talking-Digital-Multimeter/productinfo/35042+ME
Talking Digital Multi meter 35042 TE

Stock No: 35042 ME

Order directly from here or call
1-800-652-6733
There is a video you can listen to on this page.
Talking, High tech. 10 function, Backlit, 3-1/2" digit hand held meter with
1" LCD display.
True RMS/Average Measurement Selection
Includes 9V battery, test leads, instructions
Fuse Overload protection.
CE listed; IEC 1010 Cat III-1000V Compliant
NOTES:
1: To Turn OFF Voice; Press and Hold (~3sec.) "TRUE/AVG" Button
2: To Read Frequency: Select 750VAC Range- Press"HOLD/SELECT"
3: To Turn on Backlight: Press & Hold (~3sec.) "HOLD/SELECT" Button
Backlight will turn off after ~10seconds
4: Meter is Auto Off will turn off after ~20min

SPECIFICATIONS
DC VOLTS & CURRENT
Volts: .2,2,20,200,1000V
Accuracy: .5% + 3 Counts on 200mV-200V
.8% + 10 Counts 1000VDC
Current: 20uA, 2mA, 20mA, 200mA,10A
Accuracy: .8% + 10 Counts on 20ua & 2mA
2% + 30 Counts on 20mA-10A
AC VOLTS (RMS/AVG)
Frequency Response: Sine/Triangle: 40Hz-1KHz
Other Waveform: 40Hz-200Hz
Volts: .2,2,20,200,750V
Accuracy: .8% + 5 Counts on .2-200V
1.2% +10Counts on 750V
Current: 20mA, 200mA, 10A
Accuracy: 2% + 30 Counts
RESISTANCE
Ranges: 200,2K,20K,200K,2M,20M Ohms
Accuracy: .8% + 5 Counts on 200 ohm
.8% + 3 Counts on 2K-2M
1% + 25 Counts on 20M
CAPACITANCE
Ranges: 20nF, 200nF, 2uF, 20uF, 200uF, 2mF, 20mF
Accuracy: 3.5% + 20 Counts on 20nF-20uF
5% + 10 Counts on 200uF-20mf
OTHER FUNCTIONS
Frequency: (Select 750VAC Range- Press"Hold/Select" Button
Diode Test: ~3-4VDC open circuit
hFE: ~1mA test current
NCV: "Near Field AC" Beep Rate High for near/Low for far
L: 7-1/4" W: 3-1/2 T: 1-7/8" WT: 1.2