Sorry Tom, I thought the 720 would be like the 420, 520, and 620. Guess again, huh?
toggle quoted messageShow quoted text
On 12/1/2020 6:16 PM, Tom Kaufman wrote:
Tim: Thank you...yeah; that was exactly what I was looking for! I knew
that thing popped out, but was bound and determined that you had to still
put a cord in there...although something was remembering something about
putting the machine into the USB port of the computer! Yep; that did the
trick! Thanks much! Hopefully the next time I have a project like this,
I'll not go looking for cords to try to fit the DM-720!
From: email@example.com [mailto:firstname.lastname@example.org] On Behalf Of Tim
Sent: Tuesday, December 01, 2020 6:56 PM
Cc: Tim Noonan <email@example.com>
Subject: The USB is built-in and extends: Re: [all-audio] DM-720 Question
The usb plug is internal to the dm720.
With the display to the top and in front of you, there is a protruding slide
button which you need to press and push down. Doing this will extrude the
plug, and the dm720 can then be directly plugged into your USB port.
Hope this helps.
Consultant Speaker Coach
Phone: +61 419 779 669
Speaking, Coaching & Consulting: www.timnoonan.com.au
Voice Readings: www.voicereadings.com
On 2 Dec 2020, at 10:45 am, Tom Kaufman <firstname.lastname@example.org> wrote:
Howard and list: Still no soap; I know I have done this before, for I have
some files on my computer that I have used this machine to record with;
still...there apparently seems to be no way to do this! What is it I'm
missing here? A friend said that it's on the bottom of the machine
but...danged if I see anything that you can plug in there! Sorry for being
dense; I KNOW this has been done before...and I did it! But for some
strange reason, none of the cords I have tried seem to fit!
From: email@example.com [mailto:firstname.lastname@example.org] On Behalf Of Howard
Sent: Tuesday, December 01, 2020 6:36 PM
Subject: Re: [all-audio] DM-720 Question
The little end of the cord goes into the female plug in the center of
the very bottom of the olympus, I'm guessing. It only goes in one way;
don't force it.
On 12/1/2020 4:35 PM, Tom Kaufman wrote:
Hello list: I am attempting to transfer a file from my Olympus 720 to theCan
computer; my sticking point is that I apparently cannot remember where the
plug is that comes out of the DM-720 is; the one where you plug the cord
into.then you of course plug the other end to the port of the computer!
someone please refresh my memory as to what exactly goes where? I knowthis
can be done; I know I have the right type of cord! However am just nothave
finding the place where that dang cord fits into! It's been a long time
since I've transferred any files from the DS-720 to my computer that I
just forgotten what goes where and where goes what! Help greatly