Topics

Jfw, scripts, Goldwave6, and loud noise in audio

David Mehler
 

Hello,

I'm using Goldwave6 with Jfw 2020 and it's scripts for same. I've got
a piece of audio that has a rather loud noise in it. I've captured a
sample of this noise not sure I got just the noise as it's very
audio-overwhelming and i'd like to filter it out. Right now I'm trying
to open the audio, then I'm going to save it as a flac file so I don't
damaage the mp3 file by repeatedly working on it, I get a lossless
file in the flac. I'm going to try to listen to just the left channel
and just the right channel, see if one is clear and/or if one has the
audio completely. This audio is just speech so any suggestions as to
how I can filter appreciated.

Note, I am not opposed to using other tools, I've got the latest
audacity on this machine as well as have got the free-for-time thanks
to kovid19, reaper. I've also got NVDA as a second screen reader.

I'd appreciate any suggestions.

Thanks.
Dave.

Darran Ross
 

Dave, if its nothing of a personal nature, you may want to share a sample and some folks on the list might have a play as well?

David Mehler
 

Hello,

It is kind of a personal nature.

What I can do is provide a sample of the noise that resides in the
file. I've tried everything I can to filter it out, drop the volume,
tried some band pass/stop, low and high pass, but i'm either not doing
it right, not the right settings, but I have reduced it, but in doing
so the underlying audio the stuff I'm trying to hear gets really tinny
sounding. Part of it is I did not make this and I think the person who
did it did not do well with it, they encoded at 22050KHZ I think but
it's slow, so that the full file is over 27 hours long, changing the
rate to 44100 makes it intelligible and drops the file length to just
over 13 hours.

Here's the link to the interference pattern I'm trying to eliminate.
Again I can use Goldwave, reaper, or audacity, if anyone has
suggestions i'm open to them.

https://www.dropbox.com/s/r8qba57lib1z0db/noise.wav?dl=0

Thanks.
Dave.


On 4/30/20, Darran Ross via groups.io
<darran.ross=talktalk.net@groups.io> wrote:
Dave, if its nothing of a personal nature, you may want to share a sample
and some folks on the list might have a play as well?





David Mehler
 

Hello,

With regards goldwave6, jfw 2020, and the scripts, has anyone noticed
that pressing a key such as left bracket or pause doesn't give
feedback such as where the start marker is, or the status of the
toggle?

Thanks.
Dave.

On 4/30/20, David Mehler via groups.io <dave.mehler=gmail.com@groups.io> wrote:
Hello,

It is kind of a personal nature.

What I can do is provide a sample of the noise that resides in the
file. I've tried everything I can to filter it out, drop the volume,
tried some band pass/stop, low and high pass, but i'm either not doing
it right, not the right settings, but I have reduced it, but in doing
so the underlying audio the stuff I'm trying to hear gets really tinny
sounding. Part of it is I did not make this and I think the person who
did it did not do well with it, they encoded at 22050KHZ I think but
it's slow, so that the full file is over 27 hours long, changing the
rate to 44100 makes it intelligible and drops the file length to just
over 13 hours.

Here's the link to the interference pattern I'm trying to eliminate.
Again I can use Goldwave, reaper, or audacity, if anyone has
suggestions i'm open to them.

https://www.dropbox.com/s/r8qba57lib1z0db/noise.wav?dl=0

Thanks.
Dave.


On 4/30/20, Darran Ross via groups.io
<darran.ross=talktalk.net@groups.io> wrote:
Dave, if its nothing of a personal nature, you may want to share a sample
and some folks on the list might have a play as well?







John Covici
 

Did you try the denoise function in goldwave? I am not sure this will
work, the noise is very loud.

On Thu, 30 Apr 2020 14:57:23 -0400,
David Mehler wrote:

Hello,

It is kind of a personal nature.

What I can do is provide a sample of the noise that resides in the
file. I've tried everything I can to filter it out, drop the volume,
tried some band pass/stop, low and high pass, but i'm either not doing
it right, not the right settings, but I have reduced it, but in doing
so the underlying audio the stuff I'm trying to hear gets really tinny
sounding. Part of it is I did not make this and I think the person who
did it did not do well with it, they encoded at 22050KHZ I think but
it's slow, so that the full file is over 27 hours long, changing the
rate to 44100 makes it intelligible and drops the file length to just
over 13 hours.

Here's the link to the interference pattern I'm trying to eliminate.
Again I can use Goldwave, reaper, or audacity, if anyone has
suggestions i'm open to them.

https://www.dropbox.com/s/r8qba57lib1z0db/noise.wav?dl=0

Thanks.
Dave.


On 4/30/20, Darran Ross via groups.io
<darran.ross=talktalk.net@groups.io> wrote:
Dave, if its nothing of a personal nature, you may want to share a sample
and some folks on the list might have a play as well?






--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...

Steve Jacobson
 

Dave,

To my ears, this sounds like a monaural sound so it likely is the same on both channels, so using one channel or the other probably won't make much difference. Second, this noise seems to me to be pretty broad band, or at least it likely is strongest in the same frequency range that contains the information that makes speech intelligible. I don't think filtering by frequency is going to be very effective.

Is this noise always there, does it repeat often, or is it a one-time sound? Replacing the noise with silence might be the best bet, although deleting the noise might also work unless it affects the rhythm of the rest of what is being recorded. If the sound is tinny, as you described it, it would seem you are not limiting the effects you are trying to the duration of the noise itself. This noise is so loud that I don't think you will be able to apply anything to the entire recording to get rid of it. Still, if you can describe whether this sound is constant, repeats often, or just happens a few times, that might influence what one might do.

Best regards,

Steve

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of David Mehler
Sent: Thursday, April 30, 2020 1:57 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Jfw, scripts, Goldwave6, and loud noise in audio

Hello,

It is kind of a personal nature.

What I can do is provide a sample of the noise that resides in the
file. I've tried everything I can to filter it out, drop the volume,
tried some band pass/stop, low and high pass, but i'm either not doing
it right, not the right settings, but I have reduced it, but in doing
so the underlying audio the stuff I'm trying to hear gets really tinny
sounding. Part of it is I did not make this and I think the person who
did it did not do well with it, they encoded at 22050KHZ I think but
it's slow, so that the full file is over 27 hours long, changing the
rate to 44100 makes it intelligible and drops the file length to just
over 13 hours.

Here's the link to the interference pattern I'm trying to eliminate.
Again I can use Goldwave, reaper, or audacity, if anyone has
suggestions i'm open to them.

https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.dropbox.com%2Fs%2Fr8qba57lib1z0db%2Fnoise.wav%3Fdl%3D0&amp;data=02%7C01%7C%7C7f3ae92f41e5416ba33608d7ed385363%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637238698476286289&amp;sdata=%2Bxxt3cpCpHBzk55R9rK9lLRmdBwB4hHYZkDd1edKZg8%3D&amp;reserved=0

Thanks.
Dave.


On 4/30/20, Darran Ross via groups.io
<darran.ross=talktalk.net@groups.io> wrote:
Dave, if its nothing of a personal nature, you may want to share a sample
and some folks on the list might have a play as well?