Date   

Zoom marker function in firmware 2.30

Georgina Joyce
 

Hello All,

I can confirm that beeps do sound on record and stop with the 2.30 firmware installed, while wearing headphones.

After installing the firmware as Hamit suggested it is in the Recording menu. The bottom of the list is Sound markers. When you enter that menu there are strange options which didn’t make any sense to me initially. Then I found in the mode menu option there are 3 options. Off which is the default. Then Record and the bottom option Recorde and stop. They are quite long loud beeps by default. But the menu has configurable options.

But is it useful to us? The stop only works when stopping a recording not playback. As its function is to synchronise filming. The recording starts with the loud bleep. So all recordings will need editing. So you can make up your mind if it is of value to you.

Regards,


Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Re: Firmware version that makes the H6 beep.

Aidan
 

I don't have one so I don't no fore sure, but I guess you have to turn
them on first yes.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
So where do you set the tones? Or did yours just magically do it? I only ask
because Gena got confused as to weather hers updated or not. I know mine
did. But I suspect like the F recorders you have to set the tones.
On May 21, 2020, at 7:09 AM, Aidan <aidan.smarttalk@...> wrote:

Glad you found it, yes 2.30 is the latest I saw also.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah okay so downloaded the right 1 than. Just wanted to be sure as when I
went to the page I saw nothing about beeps. I didn't see the right up
you posted I mean. It's hard to tell but it seemed from the write up you
have to in-able them. Someware in the rec menu. So I'll guess I'll have
to update it and see about the tones. I think this is the case on the F
recorders as well though. you have to turn the tones on.

On 5/20/2020 6:13 PM, Georgina Joyce wrote:
Hello Hamit,

That was the version I found and posted here the extract talking about
beeps. As I am sure this is for when connected to a camera I haven’t
checked;
a) Whether my upgrade took.
b) If I can turn on the bleeps.

I would love to be wrong.

Regards,


On 20 May 2020, at 22:32, Hamit Campos <hamitcampos@...> wrote:

I forget now who said there was a new firmware that makes the H6 beep.
What was the version of this? I went to the site and 2.30 is the newest
I
saw.



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73









For those looking for free learning material

Georgina Joyce
 

Hello All,

I just saw this on the Reaper list and thought that those here who are not subscribed to RWP might like it.

On 21 May 2020, at 12:47, Jim Noseworthy <jim.noseworthy@... <mailto:jim.noseworthy@...>> wrote:


Hello all,

It's not time for my normal monthly mail-out yet, but I wanted to share a really exciting new free resource -- and I also need your urgent help!

----------------------------------------------------------------------
---------- MY NEW FREE 'EXPERT TIPS' TUTORIAL PODCAST FOR SOUND ON
SOUND!
----------------------------------------------------------------------
----------

Some of you may already have spotted Sound On Sound magazine's recent announcement of three new podcast channels. One of these is dedicated to recording and mixing, and they've commissioned me to deliver its first tutorial show, called 'Expert Tracking & Mixing Tips' -- which has just gone live today! The first episode is all about compressing snare drums, and you can listen to that for free here:

https://share.transistor.fm/s/53c6630b

As you'll know if you've heard my Cambridge-MT Patrons Podcast, I'm a big fan of audio examples, so I'll be using lots of audio illustrations in this new SOS show as a matter of course -- indeed, there are more than 20 processing demonstrations just in the first 15-minute episode! Also, because playback quality is so important for audio tutorials, I've arranged with the magazine that the podcast won't have any mastering processing applied to it, since that'd interfere with the audio illustrations. And I've also arranged with them that they'll host a lossless 24-bit WAV download of the episode that you can import into your DAW for critical listening.


---------------------------------------
...AND I NEED YOUR URGENT HELP!
---------------------------------------

If you like the sound of this new podcast, can I also ask for your help?

The reason this show is completely free to you is that it's being funded by the magazine, and they'll understandably be monitoring download/subscribe numbers to decide whether it's worth continuing. So I'd like to ask you please to download my first 'Expert Tips' episode and subscribe to the 'Recording & Mixing' channel TODAY OR TOMORROW (ie. Thursday or Friday). If SOS see a big spike in their metrics for the launch of this show, that'll send the most powerful message that you want them to continue commissioning my show in the long term.

But why the rush? Well, the magazine themselves will be ramping up general publicity for the 'Recording & Mixing' channel over the weekend, so if you don't download/subscribe before then, your response may just get lost in the noise, and won't as clearly indicate support for this specific 'Expert Tips' podcast. So if you want the magazine to continue financing my free tutorials, I'd encourage you to act now -- it only takes a few seconds to download and subscribe. Here's that link again:

https://share.transistor.fm/s/53c6630b


Oh, and keep your eyes peeled for another big new resource
announcement from me next week! I tell you, it's a three-ring circus
round here at the moment... :)

Cheers,
Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Re: Firmware version that makes the H6 beep.

Hamit Campos
 

So where do you set the tones? Or did yours just magically do it? I only ask because Gena got confused as to weather hers updated or not. I know mine did. But I suspect like the F recorders you have to set the tones.

On May 21, 2020, at 7:09 AM, Aidan <aidan.smarttalk@...> wrote:

Glad you found it, yes 2.30 is the latest I saw also.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah okay so downloaded the right 1 than. Just wanted to be sure as when I
went to the page I saw nothing about beeps. I didn't see the right up
you posted I mean. It's hard to tell but it seemed from the write up you
have to in-able them. Someware in the rec menu. So I'll guess I'll have
to update it and see about the tones. I think this is the case on the F
recorders as well though. you have to turn the tones on.

On 5/20/2020 6:13 PM, Georgina Joyce wrote:
Hello Hamit,

That was the version I found and posted here the extract talking about
beeps. As I am sure this is for when connected to a camera I haven’t
checked;
a) Whether my upgrade took.
b) If I can turn on the bleeps.

I would love to be wrong.

Regards,


On 20 May 2020, at 22:32, Hamit Campos <hamitcampos@...> wrote:

I forget now who said there was a new firmware that makes the H6 beep.
What was the version of this? I went to the site and 2.30 is the newest I
saw.



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73







Re: Firmware version that makes the H6 beep.

Aidan
 

Glad you found it, yes 2.30 is the latest I saw also.

On 5/21/20, Hamit Campos <hamitcampos@...> wrote:
Ah okay so downloaded the right 1 than. Just wanted to be sure as when I
went to the page I saw nothing about beeps. I didn't see the right up
you posted I mean. It's hard to tell but it seemed from the write up you
have to in-able them. Someware in the rec menu. So I'll guess I'll have
to update it and see about the tones. I think this is the case on the F
recorders as well though. you have to turn the tones on.

On 5/20/2020 6:13 PM, Georgina Joyce wrote:
Hello Hamit,

That was the version I found and posted here the extract talking about
beeps. As I am sure this is for when connected to a camera I haven’t
checked;
a) Whether my upgrade took.
b) If I can turn on the bleeps.

I would love to be wrong.

Regards,


On 20 May 2020, at 22:32, Hamit Campos <hamitcampos@...> wrote:

I forget now who said there was a new firmware that makes the H6 beep.
What was the version of this? I went to the site and 2.30 is the newest I
saw.



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73






Re: A Zoom question.

Colin Howard
 

Joe,

I asked the original sender if the cam needs power, it seems it can be
powered even from an USB hub like mine.

I've sent the info via my P.A to her son who has an Amazon account, hope he
is able to order it for me to be delivered at my home address, hope, then,
it is a simple process of plugging in, finding the device in my Windows 7
sounds and audio devices and enabling same.

However, before attempting this, hope to avail myself of a pair of eyes to
peruse the documentation rather than go ploughing in feet first and possibly
damaging my system!

On a personla note, you did not come back to me about Paul David's online
problems whereas both Terry and Kevin did. It seems he's now sorted, had an
engineer out yesterday evening to replace his faulty power unit.

On Wed, 20 May 2020 20:21:09 +0100, "Joe Paton" <joe@...>
wrote:

-looks good colin.
-
-Availability is the problem these days, but I'm interested myself.
-
-
-take care, thanks for the information.
-Joe
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


Re: Firmware version that makes the H6 beep.

Hamit Campos
 

Ah okay so downloaded the right 1 than. Just wanted to be sure as when I went to the page I saw nothing about beeps. I didn't see the right up you posted I mean. It's hard to tell but it seemed from the write up you have to in-able them. Someware in the rec menu. So I'll guess I'll have to update it and see about the tones. I think this is the case on the F recorders as well though. you have to turn the tones on.

On 5/20/2020 6:13 PM, Georgina Joyce wrote:
Hello Hamit,

That was the version I found and posted here the extract talking about beeps. As I am sure this is for when connected to a camera I haven’t checked;
a) Whether my upgrade took.
b) If I can turn on the bleeps.

I would love to be wrong.

Regards,


On 20 May 2020, at 22:32, Hamit Campos <hamitcampos@...> wrote:

I forget now who said there was a new firmware that makes the H6 beep. What was the version of this? I went to the site and 2.30 is the newest I saw.



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73



Re: Firmware version that makes the H6 beep.

Georgina Joyce
 

Hello Hamit,

That was the version I found and posted here the extract talking about beeps. As I am sure this is for when connected to a camera I haven’t checked;
a) Whether my upgrade took.
b) If I can turn on the bleeps.

I would love to be wrong.

Regards,


On 20 May 2020, at 22:32, Hamit Campos <hamitcampos@...> wrote:

I forget now who said there was a new firmware that makes the H6 beep. What was the version of this? I went to the site and 2.30 is the newest I saw.



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Firmware version that makes the H6 beep.

Hamit Campos
 

I forget now who said there was a new firmware that makes the H6 beep. What was the version of this? I went to the site and 2.30 is the newest I saw.


Re: A Zoom question.

Joe Paton
 

looks good colin.

Availability is the problem these days, but I'm interested myself.


take care, thanks for the information.
Joe


Re: Audio learning resources

Tony Sweeney
 

Hi Gina,


Thank you for the link to those CAVI early tutorials.


They downloaded successfully and I look forward to reading and studying them in full.


Regards,


Tony Sweeney

On 20/05/2020 14:37, Georgina Joyce wrote:
Hello Tony,

I don’t know if it is still available now so I’ll provide a link below. There were CAVI classes that were made public, then I think withdrawn. Because it was a course of using Reaper and the key mappings had changed. However, the first part is called audio essentials. Which is very informative and will help you.

https://www.dropbox.com/s/dyuegc7txt33des/audio_platinum.zip?dl=1

Gena

On 20 May 2020, at 08:29, Tony Sweeney <tonymsweeney@...> wrote:

Hi folk,


I wonder as a comparative newbee could you recommend any tutorials/podcasts etc. for learning audio as a beginner.


Thinking of say file sizes, compression anddifferent file types and other to get started with?



It would be good to know too how to know what can be sent say in an email as compared with just providing a link to a file sharing service?


Thanks for any assist with this,


Tony Sweeney



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73



Re: Audio learning resources

David Goldfield
 

Brian Hartgen <www.hartgen.org>offers a few courses on some audio products: Gold Wave, Soundforge and Reaper comes to mind.

On 5/20/2020 9:37 AM, Georgina Joyce wrote:
Hello Tony,

I don’t know if it is still available now so I’ll provide a link below. There were CAVI classes that were made public, then I think withdrawn. Because it was a course of using Reaper and the key mappings had changed. However, the first part is called audio essentials. Which is very informative and will help you.

https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.dropbox.com%2Fs%2Fdyuegc7txt33des%2Faudio_platinum.zip%3Fdl%3D1&amp;data=02%7C01%7C%7Cfcee9207feae4e26653a08d7fcc2eee3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637255786464515262&amp;sdata=zF2HjTDzhp1u0GY8w36Po5EQX32iMcRBBsp7Ac6jZiA%3D&amp;reserved=0

Gena

On 20 May 2020, at 08:29, Tony Sweeney <tonymsweeney@...> wrote:

Hi folk,


I wonder as a comparative newbee could you recommend any tutorials/podcasts etc. for learning audio as a beginner.


Thinking of say file sizes, compression anddifferent file types and other to get started with?



It would be good to know too how to know what can be sent say in an email as compared with just providing a link to a file sharing service?


Thanks for any assist with this,


Tony Sweeney



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73



Re: Hamid can you please contact me

Hamit Campos
 

Hi Andy and Gena. Well I would fully agree with Gena but I guess there’s more to it as you say Andy there are 12 buttons. I think you can play and stuff like that too. Don’t quote me on that since it’s been a while since I’ve talked to John about it.

On May 20, 2020, at 11:03 AM, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi Georgina.

As you say, only a seeing person will know what the buttons are for, though I suppose a sighted person would be able to read what is written on the device. There are 12 , I think nice tactyle buttons on the front, and as Hamid said in a recient message, he'd like on for his H6.

So I'm keen to let him have it free of charge.

I believe he lives in the States , so I'd need a postal address so I can ship it over to him.


Very best wishes.

Andy.
----- Original Message ----- From: "Georgina Joyce" <gena@...>
To: <all-audio@groups.io>
Sent: Wednesday, May 20, 2020 2:29 PM
Subject: Re: [all-audio] Hamid can you please contact me


Hello Andy,

I am waiting for my third party remote so don’t know for sure but my understanding is that the remote just has important buttons like stop play record. This enables the user to stop and start a recording without handling noise. Just like a television remote. I don’t think it would help in any way to edit recordings.

The Zoom ones are not cheap.

Regards,
On 20 May 2020, at 11:26, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi again Hamid.

I've been trying to tidy and clean up my study.

I've found a brand new Zoom H6 remote control, still in it's box.

There does not appear to be any paperwork in the box but perhaps the buttons are self explanitory.

I've never had any reasons to use it as I usually edit my recordings through Goldwave, so can trim off any unwanted table or handling noice at the beginning and end of a session.

If you give me an address to send it to , including post code/zip then I can ship it off to you.

I think when I purchased my H6, I included the Accessory Pack. I'll never use it.

Andy Logue.

meikle.aiden@....



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73







Re: The best studiomonitors i've ever heard.

Anders Holmberg
 

Hi!
I bought them from thomann.de which apparently sell across all the europe at least.
I was hearing from people who ad read reviews about these speakers.
So it was a bit of a hit or miss.
But it was a hit for me.
/A

20 maj 2020 kl. 15:10 skrev Casey <cwollner@...>:

Hi where do you get them from and what made you select thees speakers over all that is out there?



On 5/20/2020 7:31 AM, Anders Holmberg wrote:
Hi!
I have bought a pair of the Kahli Audio L4 monitors.
They’re proper speakers which has three different inputs.
Phono, tele and xlr plugs.
There are also switches on the back of each speaker. The switches sets the base and treble depending on how close or far from the wall they stand.
They are big but acts as table monitors.
The sound is really detailed with a lot of details from the base.
A pair costs around $300 i think.
I can say that my stereo is not used anymore.
/A

--
Casey




Re: Hamid can you please contact me

Andy
 

Hi Georgina.

As you say, only a seeing person will know what the buttons are for, though I suppose a sighted person would be able to read what is written on the device. There are 12 , I think nice tactyle buttons on the front, and as Hamid said in a recient message, he'd like on for his H6.

So I'm keen to let him have it free of charge.

I believe he lives in the States , so I'd need a postal address so I can ship it over to him.


Very best wishes.

Andy.

----- Original Message -----
From: "Georgina Joyce" <gena@...>
To: <all-audio@groups.io>
Sent: Wednesday, May 20, 2020 2:29 PM
Subject: Re: [all-audio] Hamid can you please contact me


Hello Andy,

I am waiting for my third party remote so don’t know for sure but my understanding is that the remote just has important buttons like stop play record. This enables the user to stop and start a recording without handling noise. Just like a television remote. I don’t think it would help in any way to edit recordings.

The Zoom ones are not cheap.

Regards,
On 20 May 2020, at 11:26, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi again Hamid.

I've been trying to tidy and clean up my study.

I've found a brand new Zoom H6 remote control, still in it's box.

There does not appear to be any paperwork in the box but perhaps the buttons are self explanitory.

I've never had any reasons to use it as I usually edit my recordings through Goldwave, so can trim off any unwanted table or handling noice at the beginning and end of a session.

If you give me an address to send it to , including post code/zip then I can ship it off to you.

I think when I purchased my H6, I included the Accessory Pack. I'll never use it.

Andy Logue.

meikle.aiden@....



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Re: Audio learning resources

Georgina Joyce
 

Hello Tony,

I don’t know if it is still available now so I’ll provide a link below. There were CAVI classes that were made public, then I think withdrawn. Because it was a course of using Reaper and the key mappings had changed. However, the first part is called audio essentials. Which is very informative and will help you.

https://www.dropbox.com/s/dyuegc7txt33des/audio_platinum.zip?dl=1

Gena

On 20 May 2020, at 08:29, Tony Sweeney <tonymsweeney@...> wrote:

Hi folk,


I wonder as a comparative newbee could you recommend any tutorials/podcasts etc. for learning audio as a beginner.


Thinking of say file sizes, compression anddifferent file types and other to get started with?



It would be good to know too how to know what can be sent say in an email as compared with just providing a link to a file sharing service?


Thanks for any assist with this,


Tony Sweeney



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Re: Hamid can you please contact me

Georgina Joyce
 

Hello Andy,

I am waiting for my third party remote so don’t know for sure but my understanding is that the remote just has important buttons like stop play record. This enables the user to stop and start a recording without handling noise. Just like a television remote. I don’t think it would help in any way to edit recordings.

The Zoom ones are not cheap.

Regards,
On 20 May 2020, at 11:26, Andy via groups.io <meikle.aiden=btinternet.com@groups.io> wrote:

Hi again Hamid.

I've been trying to tidy and clean up my study.

I've found a brand new Zoom H6 remote control, still in it's box.

There does not appear to be any paperwork in the box but perhaps the buttons are self explanitory.

I've never had any reasons to use it as I usually edit my recordings through Goldwave, so can trim off any unwanted table or handling noice at the beginning and end of a session.

If you give me an address to send it to , including post code/zip then I can ship it off to you.

I think when I purchased my H6, I included the Accessory Pack. I'll never use it.

Andy Logue.

meikle.aiden@....



Gena

Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73


Re: The best studiomonitors i've ever heard.

Casey
 

Hi where do you get them from and what made you select thees speakers over all that is out there?

On 5/20/2020 7:31 AM, Anders Holmberg wrote:
Hi!
I have bought a pair of the Kahli Audio L4 monitors.
They’re proper speakers which has three different inputs.
Phono, tele and xlr plugs.
There are also switches on the back of each speaker. The switches sets the base and treble depending on how close or far from the wall they stand.
They are big but acts as table monitors.
The sound is really detailed with a lot of details from the base.
A pair costs around $300 i think.
I can say that my stereo is not used anymore.
/A

--
Casey


The best studiomonitors i've ever heard.

Anders Holmberg
 

Hi!
I have bought a pair of the Kahli Audio L4 monitors.
They’re proper speakers which has three different inputs.
Phono, tele and xlr plugs.
There are also switches on the back of each speaker. The switches sets the base and treble depending on how close or far from the wall they stand.
They are big but acts as table monitors.
The sound is really detailed with a lot of details from the base.
A pair costs around $300 i think.
I can say that my stereo is not used anymore.
/A


Hamid can you please contact me

Andy
 

Hi again Hamid.

I've been trying to tidy and clean up my study.

I've found a brand new Zoom H6 remote control, still in it's box.

There does not appear to be any paperwork in the box but perhaps the buttons are self explanitory.

I've never had any reasons to use it as I usually edit my recordings through Goldwave, so can trim off any unwanted table or handling noice at the beginning and end of a session.

If you give me an address to send it to , including post code/zip then I can ship it off to you.

I think when I purchased my H6, I included the Accessory Pack. I'll never use it.

Andy Logue.

meikle.aiden@....