Date   

first time poster

Kimsan <kimsansong@...>
 

Hi,



Just writing to say hello.

I mainly joined this list to see if there will be any goldwave/or audacity
questions as I'm a podcaster and not to say I do a terrible job editing but
the old saying is there is always room for improvement right?





If you are a wrestling fan, I invite you to visit my wrestling site for
blogs and podcasts by navigating to: http://www.therasslincafe.com/

Also, you may like our page on facebook at
https://www.facebook.com/TheRasslinCafe/


Re: Just Testing

Tom Kaufman
 

Yep...it got here just fine!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Warren Goodwin
Sent: Friday, December 01, 2017 5:45 AM
To: all-audio@groups.io
Subject: [all-audio] Just Testing

This is my first polt so I want to find out if this message gets to the list. Thanks in advance to anyone who may reply.

Warren Goodwin

Sent from Mail for Windows 10


Re: First Time Posts

vinny Samarco
 

Hi,
This is Vinny posting my first message to this list. I have appreciated the pc-audio list, though I didn't send many messages, and I am thankful that the list is continuing.
All the best to you Tom. Tell us how we can make the list more efficient.
Vinny

-----Original Message-----
From: Tom Kaufman
Sent: Thursday, November 30, 2017 10:47 AM
To: all-audio@groups.io
Subject: Re: [all-audio] First Time Posts

And I'll second what Robin said!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Robin
Frost
Sent: Wednesday, November 29, 2017 9:58 PM
To: all-audio@groups.io
Subject: Re: [all-audio] First Time Posts

Hi Tom,
Thanks for all you do to provide this list and its assistance for us all.
It's greatly appreciated.
Robin


-----Original Message-----
From: Tom
Sent: Wednesday, November 29, 2017 9:29 PM
To: all-audio@groups.io
Subject: [all-audio] First Time Posts

Ladies and gentlemen,

Groups i o apparently requires approval of first time posts.
I haven't found where to turn it off. If you post a message
before morning eastern time, and it is your first post, I
might not get to it before then. If I wake during the night,
which always happens, I'll check for posts requiring
approval.

Thank you all for joining.

Tom


Re: Disposing of First-Time Post Restriction

brian
 

I thought that I would also get my first post in as well.  I use nvda for my screen reader and winamp for audio files like mp3 podcasts.  I like all things radio and eyes on success podcasts.  I have the sara reading machine for reading print.  If you play cds on it it's not that great in stereo.  But it will do in a pinch.

73

n8mnx

Brian Sackrider

On 11/30/2017 11:31 AM, gstoodley wrote:
Hi, Tom. I make a first-time post now to get your approval and avoid a delay
when I really need aid from All-Audio. Sorry for the nuisance factor.

Graham Stoodley


Just Testing

Warren Goodwin
 

This is my first polt so I want to find out if this message gets to the list. Thanks in advance to anyone who may reply.

Warren Goodwin

Sent from Mail for Windows 10


Re: List Stuff

Colin Howard
 

Tom,

Please keep All-audio in the subject line as it helps so much with my rules
and filters.

Cheers.



---
This email has been checked for viruses by AVG.
http://www.avg.com


List Stuff

Tom
 

Ladies and gentlemen,

I did set the list member who asked about digest mode to
digest. I will do that for anybody who might want it. Each
subscriber can do it themselves by going to
groups dot i o
and searching for all-audio. It will ask for your e-mail
address and it will want you to enter a password. Once you do

all this you will be able to make all kinds of adjustments to

your subscription. None of this is required for you to be
subscribed to the list and receive or post messages.

Eventually I want to remove the all-audio from the subject
line. The pc audio list did not have anything identifying it
but if enough subscribers like it I'll keep it. I'll be doing

something about all the footer lines too.

Also, eventually, I want to make a website for the list. I
really liked the way messages were archived for the pc audio
list. Of course, groups i o has archives but getting to them
aren't as convenient.

Thank you for sticking with the changes.

Tom Dimeo


Re: hi! and a ripping question

John Heath
 

Thanks!

-----Original Message-----
From: Clifford Blackwell
Sent: Thursday, November 30, 2017 8:13 AM
To: all-audio@groups.io
Subject: Re: [all-audio] hi! and a ripping question

I believe there is a conversion function in CDEX. You'll have to look
around in the menus to find it as I don't recall where it is. I would guess
Mindows Media would have the similar capability. Otherwise, there are many
free file converters available with a simple Google search.
----- Original Message -----
From: "John Heath via Groups.Io" <gus1888@...>
To: <all-audio@groups.io>
Sent: Wednesday, November 29, 2017 9:35 PM
Subject: Re: [all-audio] hi! and a ripping question


Not certain what they are but they probably wave files judging by the size; one song, 95 megs. If it were on a compact disk I could rip it easy, but I don't know what to do with a wave file that's not on a compact disk.

-----Original Message-----
From: Hamit Campos
Sent: Wednesday, November 29, 2017 8:46 PM
To: all-audio@groups.io
Subject: Re: [all-audio] hi! and a ripping question

What do you mean by somethign on your comp? Do you mean you have a
folder with CDDA files and ya wana convert them? CDDA is what the files
on a regular old CD are by the way. It means Compact Disk Digital Audio.


On 11/29/2017 6:29 PM, John Heath via Groups.Io wrote:
I have both Windows Media Player and Cdex on my computer. I’ve used both for ripping cds. But how do I rip something that is on my computer?

Thanks in advance.









---
This email has been checked for viruses by AVG.
http://www.avg.com


Re: hi! and a ripping question

John Heath
 

Thanks to all who responded. Sorry I mint conversion.

-----Original Message-----
From: Humberto Rodriguez
Sent: Thursday, November 30, 2017 9:13 AM
To: all-audio@groups.io
Subject: Re: [all-audio] hi! and a ripping question

I convert either with a program called Switch or with Goldwave.
Humberto


-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of John Heath via Groups.Io
Sent: Wednesday, November 29, 2017 11:08 PM
To: all-audio@groups.io
Subject: Re: [all-audio] hi! and a ripping question

I want to convert the wave files to mp3 to conserve space. Also I can't send
individual songs to my friends in wave format, it's too large. They play
just fine.

-----Original Message-----
From: Hamit Campos
Sent: Wednesday, November 29, 2017 10:49 PM
To: all-audio@groups.io
Subject: Re: [all-audio] hi! and a ripping question

Ah so what do you mean ya wana rip them? They then should just play
then. The reason 1 has to rip in the first place is cause the CDDA files
are more I guess you could say contaners or indexes to the actual WAV
files. Thus when you rip it to something either you bring it back to
wave or you change it to something else.


On 11/29/2017 10:35 PM, John Heath via Groups.Io wrote:
Not certain what they are but they probably wave files judging by the
size; one song, 95 megs. If it were on a compact disk I could rip it easy,
but I don't know what to do with a wave file that's not on a compact disk.

-----Original Message----- From: Hamit Campos
Sent: Wednesday, November 29, 2017 8:46 PM
To: all-audio@groups.io
Subject: Re: [all-audio] hi! and a ripping question

What do you mean by somethign on your comp? Do you mean you have a
folder with CDDA files and ya wana convert them? CDDA is what the files
on a regular old CD are by the way. It means Compact Disk Digital Audio.


On 11/29/2017 6:29 PM, John Heath via Groups.Io wrote:
I have both Windows Media Player and Cdex on my computer. I’ve used both
for ripping cds. But how do I rip something that is on my computer?

Thanks in advance.









Re: Editing out pops with Audacity - not working

Anders Holmberg
 

Hi!
I think there is a popfilter in audacity but it was a very long time since i’ve used it as i don’t use windows anymore.
On the mac the audacity isn’t accessibl, not as accessible as it used to be.
/A

30 nov. 2017 kl. 07:52 skrev mach25@...:

I have a long track that has delay on it and a loud pop that gets repeated with each delay. The pop itself sounds a lot like the pop of a noisy LP. It is caused by lack of oscillators in an additive synthesizer, the Synergy. This pop also repeats about ten times throughout the track. On initial recording, there was no way to get it to play without pops occurring. So I left the recording for cleaning up later--now. Manually zooming in to find the pop is workable, but smoothing out the discontinuous waveform is still not removing the pop. Plus, the pop gets harder to find with each delay repeat getting quieter and quieter. Several attempts have not worked, so I'm checking here for help. Is there a tool within Audacity that can isolate such noise and remove it?

Fred (first post and thanks for restarting the group)





Another First Time Post

Gary Ray
 

Gary Ray here.


Greetings from Mexico

Gerardo Corripio
 

Recently joined. Gera from Mexico, and use Goldwave for recording with ny laptop, and Audiomemos, and Bossjock Jr for when recording fron ny iPhone. Hope to learn and enrich my audio experiences. Thanks for recreating the list!

Gera
Enviado desde mi iPhone 5S de Telcel


First Post

Tom Kaufman
 

Well I did reply to something, but don't know if this counts as an
honest-to-goodness post" so here's my post! Hopefully I have been accepted!

Tom Kaufman


Re: hi! and a ripping question

Tom Kaufman
 

Or Switch? That'll do it as well!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Hamit Campos
Sent: Thursday, November 30, 2017 8:54 AM
To: all-audio@groups.io
Subject: Re: [all-audio] hi! and a ripping question

Ah okay so it's conversion you're after. So do you have Audacity or
Sound Forge? That will do that easy enough. Or even Gold Wave.


On 11/29/2017 11:07 PM, John Heath via Groups.Io wrote:
I want to convert the wave files to mp3 to conserve space. Also I
can't send individual songs to my friends in wave format, it's too
large. They play just fine.

-----Original Message----- From: Hamit Campos
Sent: Wednesday, November 29, 2017 10:49 PM
To: all-audio@groups.io
Subject: Re: [all-audio] hi! and a ripping question

Ah so what do you mean ya wana rip them? They then should just play
then. The reason 1 has to rip in the first place is cause the CDDA files
are more I guess you could say contaners or indexes to the actual WAV
files. Thus when you rip it to something either you bring it back to
wave or you change it to something else.


On 11/29/2017 10:35 PM, John Heath via Groups.Io wrote:
Not certain what they are but they probably wave files judging by the
size; one song, 95 megs. If it were on a compact disk I could rip it
easy, but I don't know what to do with a wave file that's not on a
compact disk.

-----Original Message----- From: Hamit Campos
Sent: Wednesday, November 29, 2017 8:46 PM
To: all-audio@groups.io
Subject: Re: [all-audio] hi! and a ripping question

What do you mean by somethign on your comp? Do you mean you have a
folder with CDDA files and ya wana convert them? CDDA is what the files
on a regular old CD are by the way. It means Compact Disk Digital Audio.


On 11/29/2017 6:29 PM, John Heath via Groups.Io wrote:
I have both Windows Media Player and Cdex on my computer. I’ve used
both for ripping cds. But how do I rip something that is on my
computer?

Thanks in advance.















Registering I'm here for the list

Rea Lists
 

I'm Ray and I am in the UK.


Hoping, Tom and list, I read you correctly that we have to send an initial message to the list to be seen as non-spammers.


I've found PC Audio useful and I do a lot of recording for our weekly talking newspaper.  I'd like to thank Tom for all his work in migrating the list to this provider.  Hope Tom, or someone, you can tell me how to go digest mode.  Happy to sit here quietly in the background.


ray.


Re: First Time Posts

Tom Kaufman
 

And I'll second what Robin said!
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of Robin
Frost
Sent: Wednesday, November 29, 2017 9:58 PM
To: all-audio@groups.io
Subject: Re: [all-audio] First Time Posts

Hi Tom,
Thanks for all you do to provide this list and its assistance for us all.
It's greatly appreciated.
Robin


-----Original Message-----
From: Tom
Sent: Wednesday, November 29, 2017 9:29 PM
To: all-audio@groups.io
Subject: [all-audio] First Time Posts

Ladies and gentlemen,

Groups i o apparently requires approval of first time posts.
I haven't found where to turn it off. If you post a message
before morning eastern time, and it is your first post, I
might not get to it before then. If I wake during the night,
which always happens, I'll check for posts requiring
approval.

Thank you all for joining.

Tom


Re: Disposing of First-Time Post Restriction

Evan Reese
 

Well, I might as well hitch a ride on his firsttime post and get my own in. <smile>
Hopefully, I won't be suspended for "multiple bounces" on this list the way I was on the previous one, and have to confirm my membership. I have no idea why that happened.
Evan

-----Original Message-----
From: gstoodley
Sent: Thursday, November 30, 2017 11:31 AM
To: all-audio@groups.io
Subject: [all-audio] Disposing of First-Time Post Restriction

Hi, Tom. I make a first-time post now to get your approval and avoid a delay
when I really need aid from All-Audio. Sorry for the nuisance factor.

Graham Stoodley


Disposing of First-Time Post Restriction

gstoodley@...
 

Hi, Tom. I make a first-time post now to get your approval and avoid a delay
when I really need aid from All-Audio. Sorry for the nuisance factor.

Graham Stoodley


Re: re need to lower the volume on a audio file

Hamit Campos
 

Gold Wave may too.

On 11/30/2017 9:22 AM, stewartross wrote:
i have a audio file which i need to lower the volume of and to equalise it.
can anyone suggest any programmes i can use.
from stewart ross

from the ross meister


Re: re need to lower the volume on a audio file

Hamit Campos
 

Hmmmmmmmmmm I know SoundForge can lower it. I guess equalize it too but not too sure as I don't do taht. Making things louder or quieter is about all I do.

On 11/30/2017 9:22 AM, stewartross wrote:
i have a audio file which i need to lower the volume of and to equalise it.
can anyone suggest any programmes i can use.
from stewart ross

from the ross meister

4241 - 4260 of 4296