Date   

Re: Pulling my hair out with Just Press Record

Georgina Joyce
 

Hello,

I can use headphones. But you are not understanding the problem. Not to worry.

Regards,
On 10 May 2022, at 18:21, Anders Holmberg <anders@...> wrote:

Hi!
Can you we are headphones while recording or do you need VoiceOver in the recording?
Bless!
/A

10 maj 2022 kl. 12:23 skrev Georgina Joyce <gena@... <mailto:gena@...>>:

Hello,

Thanks for the suggestion. I haven''t tried that and it won't hurt. The AppleVis listing states that VoiceOver should mute itself and it did for my first recording. But not the second. Don't know if I am going to do any more recordings like this if it is not reliable.

Regards,

On 10 May 2022, at 10:29, Anders Holmberg <anders@...> wrote:

Hi!
It should work without silencing VOiceOver if you want that.
Maybe you should do a restart of the phone to see if that could help.
/A

9 maj 2022 kl. 23:31 skrev Georgina Joyce <gena@...>:

Hello All,

I recently decided to use my phone and just press record in my office because I couldn't get all the equipment in my little recording area to make the recording. I recorded for 18 minutes which worked really great. But a couple days later I tried and tried to record a 5 minute recording and every time VoiceOver announced screen off and then the audio tone of the phone going into sleep mode. I did not install any updates or change anything. I looked on AppleVis and I understand VoiceOver is supposed to be silenced while recording But I definitely have a recording of VoiceOver talking. I obviously also had trouble stopping the recording.

Anyone had this problem? Anyone have any ideas how to prevent it happening again?

Thanks,

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS










Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS








Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Problems Trying To Convert A File

Georgina Joyce
 

Hello Tom,

It sounds like you have copied files from one machine to another and the computer is questioning should you be running this file as it belongs to somone else. Try running switch with admin privileges.

Regards,
On 10 May 2022, at 18:59, Tom Kaufman <tomcat53@...> wrote:

Hello List: I have downloaded and installed Switch to my Windows 10
computer. Up to this point (when I was running Windows 7) never had a
problem! Now that I've gone to a different machine (a Windows 10 machine)
nothing but problems (two problems to be more specific) first, when I try to
convert the file in question from4A to MP3, I am presented with a message
that says The folder C:\users\tom\music is "read only." Please specify
write in write in able folder (or that's what it's sounded like it was
saying) how do I make this stupid Windows 10 machine understand that this
definitely a music file? I have tried changing the folder from "read" to
whatever the hell it wants.to know avail! To add to my frustration, I am
also deluged with a "security message, telling me that an unauthorized
action has been blocked! Now I know Switch to be a good file converter!
But I need to know (and soon) how to get around these problems! I know we
have some good audio people on here and am hoping that some of you will come
forward and tell me in language that I can understand what it is I need to
do! The file plays (it definitely is a music file) so what gives?

Tom Kaufman





Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Problems Trying To Convert A File

Tom Kaufman
 

Hello List: I have downloaded and installed Switch to my Windows 10
computer. Up to this point (when I was running Windows 7) never had a
problem! Now that I've gone to a different machine (a Windows 10 machine)
nothing but problems (two problems to be more specific) first, when I try to
convert the file in question from4A to MP3, I am presented with a message
that says The folder C:\users\tom\music is "read only." Please specify
write in write in able folder (or that's what it's sounded like it was
saying) how do I make this stupid Windows 10 machine understand that this
definitely a music file? I have tried changing the folder from "read" to
whatever the hell it wants.to know avail! To add to my frustration, I am
also deluged with a "security message, telling me that an unauthorized
action has been blocked! Now I know Switch to be a good file converter!
But I need to know (and soon) how to get around these problems! I know we
have some good audio people on here and am hoping that some of you will come
forward and tell me in language that I can understand what it is I need to
do! The file plays (it definitely is a music file) so what gives?

Tom Kaufman


Re: Pulling my hair out with Just Press Record

Anders Holmberg
 

Hi!
Can you we are headphones while recording or do you need VoiceOver in the recording?
Bless!
/A

10 maj 2022 kl. 12:23 skrev Georgina Joyce <gena@...>:

Hello,

Thanks for the suggestion. I haven''t tried that and it won't hurt. The AppleVis listing states that VoiceOver should mute itself and it did for my first recording. But not the second. Don't know if I am going to do any more recordings like this if it is not reliable.

Regards,

On 10 May 2022, at 10:29, Anders Holmberg <anders@...> wrote:

Hi!
It should work without silencing VOiceOver if you want that.
Maybe you should do a restart of the phone to see if that could help.
/A

9 maj 2022 kl. 23:31 skrev Georgina Joyce <gena@...>:

Hello All,

I recently decided to use my phone and just press record in my office because I couldn't get all the equipment in my little recording area to make the recording. I recorded for 18 minutes which worked really great. But a couple days later I tried and tried to record a 5 minute recording and every time VoiceOver announced screen off and then the audio tone of the phone going into sleep mode. I did not install any updates or change anything. I looked on AppleVis and I understand VoiceOver is supposed to be silenced while recording But I definitely have a recording of VoiceOver talking. I obviously also had trouble stopping the recording.

Anyone had this problem? Anyone have any ideas how to prevent it happening again?

Thanks,

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS










Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS







Re: Pulling my hair out with Just Press Record

Georgina Joyce
 

Hello,

Thanks for the suggestion. I haven''t tried that and it won't hurt. The AppleVis listing states that VoiceOver should mute itself and it did for my first recording. But not the second. Don't know if I am going to do any more recordings like this if it is not reliable.

Regards,

On 10 May 2022, at 10:29, Anders Holmberg <anders@...> wrote:

Hi!
It should work without silencing VOiceOver if you want that.
Maybe you should do a restart of the phone to see if that could help.
/A

9 maj 2022 kl. 23:31 skrev Georgina Joyce <gena@...>:

Hello All,

I recently decided to use my phone and just press record in my office because I couldn't get all the equipment in my little recording area to make the recording. I recorded for 18 minutes which worked really great. But a couple days later I tried and tried to record a 5 minute recording and every time VoiceOver announced screen off and then the audio tone of the phone going into sleep mode. I did not install any updates or change anything. I looked on AppleVis and I understand VoiceOver is supposed to be silenced while recording But I definitely have a recording of VoiceOver talking. I obviously also had trouble stopping the recording.

Anyone had this problem? Anyone have any ideas how to prevent it happening again?

Thanks,

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS










Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Pulling my hair out with Just Press Record

Anders Holmberg
 

Hi!
It should work without silencing VOiceOver if you want that.
Maybe you should do a restart of the phone to see if that could help.
/A

9 maj 2022 kl. 23:31 skrev Georgina Joyce <gena@...>:

Hello All,

I recently decided to use my phone and just press record in my office because I couldn't get all the equipment in my little recording area to make the recording. I recorded for 18 minutes which worked really great. But a couple days later I tried and tried to record a 5 minute recording and every time VoiceOver announced screen off and then the audio tone of the phone going into sleep mode. I did not install any updates or change anything. I looked on AppleVis and I understand VoiceOver is supposed to be silenced while recording But I definitely have a recording of VoiceOver talking. I obviously also had trouble stopping the recording.

Anyone had this problem? Anyone have any ideas how to prevent it happening again?

Thanks,

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS







Pulling my hair out with Just Press Record

Georgina Joyce
 

Hello All,

I recently decided to use my phone and just press record in my office because I couldn't get all the equipment in my little recording area to make the recording. I recorded for 18 minutes which worked really great. But a couple days later I tried and tried to record a 5 minute recording and every time VoiceOver announced screen off and then the audio tone of the phone going into sleep mode. I did not install any updates or change anything. I looked on AppleVis and I understand VoiceOver is supposed to be silenced while recording But I definitely have a recording of VoiceOver talking. I obviously also had trouble stopping the recording.

Anyone had this problem? Anyone have any ideas how to prevent it happening again?

Thanks,

Georgina


Call: M0EBP
DMR ID: 2346259
Allstar: 52178
Locater: IO83PS


Re: Need Urgent Help As Soon As Possible...Like Within The Next Hour

Tom Kaufman
 

Hello Steve and list: Well I was able to find a good friend who converted the file to MP3 for me, so I then took off the stuff I didn't need! But I ran into another problem that I don't know how to fix: Windows Security said it was blocking something...the two programs (or as they now call them "apps now) are Switch (a program that converts files to different things like MP3 or whatever) am also employing the help of MP3 Direct Cut, which is very good with taking the unwanted parts of a file off! So how do I tell Windows Security that these programs I have downloaded to just unblock whatever it's blocking in case I need to convert anything else?
Thanks,
Tom Kaufman

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Steve Matzura
Sent: Saturday, April 30, 2022 7:03 PM
To: all-audio@groups.io
Subject: Re: [all-audio] Need Urgent Help As Soon As Possible...Like Within The Next Hour

I don't know the program of which you write, but I'm reasonably certain it's asking you where you want to save the converted file.


On 4/30/2022 6:56 PM, Tom Kaufman wrote:
Hello List: Okay.here's the deal: I have created a file that I need to
convert to MP3; for this, I have downloaded and installed Switch on this
computer which is running Windows 10. I moved the file to a folder called
My Music-shortcut (is in my external drive) so I put the file into Switch
and attempted to convert it to MP3, but I get a message telling me that I
must tell it the "file path!" All I know to tell it (and ALL I KNOW TO TELL
IT) is that the file is in My Book; is in this My Music shortcut." I must
convert it to MP3, so that I then edit it, using MP3 Direct Cut! Hopefully
this message is seen in the next few minutes, and I can get help with this!
Thanks for reading and for your indulgence!

Tom Kaufman








Re: Need Urgent Help As Soon As Possible...Like Within The Next Hour

Steve Matzura
 

I don't know the program of which you write, but I'm reasonably certain it's asking you where you want to save the converted file.

On 4/30/2022 6:56 PM, Tom Kaufman wrote:
Hello List: Okay.here's the deal: I have created a file that I need to
convert to MP3; for this, I have downloaded and installed Switch on this
computer which is running Windows 10. I moved the file to a folder called
My Music-shortcut (is in my external drive) so I put the file into Switch
and attempted to convert it to MP3, but I get a message telling me that I
must tell it the "file path!" All I know to tell it (and ALL I KNOW TO TELL
IT) is that the file is in My Book; is in this My Music shortcut." I must
convert it to MP3, so that I then edit it, using MP3 Direct Cut! Hopefully
this message is seen in the next few minutes, and I can get help with this!
Thanks for reading and for your indulgence!

Tom Kaufman






Need Urgent Help As Soon As Possible...Like Within The Next Hour

Tom Kaufman
 

Hello List: Okay.here's the deal: I have created a file that I need to
convert to MP3; for this, I have downloaded and installed Switch on this
computer which is running Windows 10. I moved the file to a folder called
My Music-shortcut (is in my external drive) so I put the file into Switch
and attempted to convert it to MP3, but I get a message telling me that I
must tell it the "file path!" All I know to tell it (and ALL I KNOW TO TELL
IT) is that the file is in My Book; is in this My Music shortcut." I must
convert it to MP3, so that I then edit it, using MP3 Direct Cut! Hopefully
this message is seen in the next few minutes, and I can get help with this!
Thanks for reading and for your indulgence!

Tom Kaufman


Re: re looking fore all the whit burn

Robert Byers
 

Hi Stew!

If you would like to contact me off line, we'll see what we can arrange.
I have Bubbling under, Country, R&B, Pop and some of Disco.
It takes 416 GB of space.
Rob.

robertbyers@...

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of stewartross via
groups.io
Sent: Wednesday, 6 April 2022 10:45 PM
To: all-audio@groups.io
Subject: [all-audio] re looking fore all the whit burn

hi does anyone on the list have any of the whitburn years?
from stew







--
This email has been checked for viruses by AVG.
https://www.avg.com


Re: re taking the blank bit out of my audio file

JM Casey
 

Did you get 'er done?
Put the start marker at the beginning of the file. Place the finish marker
at 4:00. Hit delete and the selction 9bounded by the markers) will be gone.

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of stewartross via
groups.io
Sent: April 11, 2022 11:00 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi ok have loaded my file in goldwave,
its the first time i have used this software, how do i take the first 4 mins
out?
stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:41 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


John's right. GoldWave is good too, although I believe you have to purchase
that one as aposed to Audacity which is free. GoldWave from what I can tell
from listening to other tutorials that people have made with it, it seems
user friendly with jaws too. Here's the link for that one too:
http://goldwave.com
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks



-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:28 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi mike thanks fore this can u send me a link fore the software?
i've seen u on the spl group.
from stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:18 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Good morning Steward:
Yes, there's a simple way to do just that. Are you familiar with the audio
editor Audacity? I often refer to it as a word document in audio format,
because of the way you edit files with it. Just like Word, you have to
select text prior to deleting or changing it in any way. Audacity is free
and easy to use, and is very friendly with Jaws. You say the first 4 minutes
of your file is blank? No problem. With audacity, all you have to do, is
find the spot in the file where the audio starts, press the left bracket to
put a placemarker there, press shift J to select everything from the
placemarker back to the left, then press control K to delete the silence.
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks


-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:02 AM
To: all-audio@groups.io
Subject: [all-audio] re taking the blank bit out of my audio file

hi all,
i have an audio file,
the first 4 mins of it is blank,
i want to take this out, using some kind of software thats jaws friendly,
without loosing any quality,
if someone can help me, and tell me how to do it that would be most
grateful.
regards
stewart


Re: re taking the blank bit out of my audio file

David Goldfield
 

Hartgen Consoltancy sells a course covering the use of GoldWave which costs fifty British pounds. At the time of this writing that converts to $65.11.
You can purchase it at the below link.
https://www.hartgen.org/goldwave


David Goldfield,
Blindness Assistive Technology Specialist

NVDA Certified Expert

Subscribe to the Tech-VI announcement list to receive emails regarding news and events in the blindness assistive technology field.
Email: tech-vi+subscribe@groups.io
www.DavidGoldfield.org

-----Original Message-----
From: all-audio@groups.io <all-audio@groups.io> On Behalf Of stewartross via groups.io
Sent: Monday, April 11, 2022 11:00 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi ok have loaded my file in goldwave,
its the first time i have used this software, how do i take the first 4 mins out?
stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:41 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


John's right. GoldWave is good too, although I believe you have to purchase
that one as aposed to Audacity which is free. GoldWave from what I can tell
from listening to other tutorials that people have made with it, it seems
user friendly with jaws too. Here's the link for that one too:
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgoldwave.com%2F&;data=04%7C01%7C%7C3320d8c2000e43aa964908da1bcbf95a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637852860115654682%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp;sdata=zVsokqjwK%2BNAfSSgfNgtxP8h2J2Oa7qy0FNyo4XXJ1I%3D&amp;reserved=0
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.sonicradio.rocks%2F&;data=04%7C01%7C%7C3320d8c2000e43aa964908da1bcbf95a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637852860115654682%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp;sdata=qczu1a8iiWhBCaWvm9FcSXVmqF0Q%2FvCC%2BY9Sv3Y%2BgLs%3D&amp;reserved=0



-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:28 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi mike thanks fore this can u send me a link fore the software?
i've seen u on the spl group.
from stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:18 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Good morning Steward:
Yes, there's a simple way to do just that. Are you familiar with the audio
editor Audacity? I often refer to it as a word document in audio format,
because of the way you edit files with it. Just like Word, you have to
select text prior to deleting or changing it in any way. Audacity is free
and easy to use, and is very friendly with Jaws. You say the first 4 minutes
of your file is blank? No problem. With audacity, all you have to do, is
find the spot in the file where the audio starts, press the left bracket to
put a placemarker there, press shift J to select everything from the
placemarker back to the left, then press control K to delete the silence.
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.sonicradio.rocks%2F&;data=04%7C01%7C%7C3320d8c2000e43aa964908da1bcbf95a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637852860115654682%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp;sdata=qczu1a8iiWhBCaWvm9FcSXVmqF0Q%2FvCC%2BY9Sv3Y%2BgLs%3D&amp;reserved=0


-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:02 AM
To: all-audio@groups.io
Subject: [all-audio] re taking the blank bit out of my audio file

hi all,
i have an audio file,
the first 4 mins of it is blank,
i want to take this out, using some kind of software thats jaws friendly,
without loosing any quality,
if someone can help me, and tell me how to do it that would be most
grateful.
regards
stewart


Re: re taking the blank bit out of my audio file

John Covici
 

Goldwave is from goldwave.com. Its about the same as audacity, find
the place in the file where the blank starts and hit the [ key -- when
you open the file the [ key is at the beginning of the file. Find the
end of the blank area and hit the ] key and then if you are sure, hit
the delete (not backspace) key and then save the file -- this program
works with .wav files, otherwise it will convert mp3 to wav and back.

On Mon, 11 Apr 2022 10:25:03 -0400,
stewartross via groups.io wrote:

hi there
the thing with some of the software, is,
you can loose the quality of the file.
where can u get goldwave from,
and how do i take the silence bit from the beginning.
from stewart
----- Original Message ----- From: "John Covici"
<covici@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:22 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


I would use goldwave, its very Jaws friendly and once you know the
keyboard shortcuts, you will be able to do much more if you like.

On Mon, 11 Apr 2022 10:01:58 -0400,
stewartross via groups.io wrote:

hi all,
i have an audio file,
the first 4 mins of it is blank,
i want to take this out, using some kind of software thats jaws friendly,
without loosing any quality,
if someone can help me, and tell me how to do it that would be
most grateful.
regards
stewart





--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...









--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...


Re: re taking the blank bit out of my audio file

stewartross
 

hi mike
many thanks fore this.stew

----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 4:01 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Sure.
Here ya go:
https://www.dropbox.com/s/txpwyvns15f4zcd/Ninite%20Audacity%20Installer.exe?
dl=0
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks



-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:51 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi mike
can u send me a dropbox link fore the .exe file?
from stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:36 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Oh Hi! Yeah now that I think of it, I've seen you over there too. I often
use Audacity for my production work with Sonic Radio. You can get a copy of
the software from ninite.com. Here's the link:
http://www.ninite.com
Just use the F key to scroll down by control, and eventually you'll get to
the Audacity program. You see, on Ninite, they've got a bunch of checkboxes
for the different files and all you have to do is check the box for the
software file you want, then scroll down to the bottom where you'll find the
Get your ninite button. I've used these guys to obtain software lots of
times and they're very user-friendly with jaws. Another nice thing about
them is that you can easily download stuff whithout having to worry about
those annoying toolbars and other junk that tries to sneak its way into our
computers.


Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks



-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:28 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi mike thanks fore this can u send me a link fore the software?
i've seen u on the spl group.
from stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:18 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Good morning Steward:
Yes, there's a simple way to do just that. Are you familiar with the audio
editor Audacity? I often refer to it as a word document in audio format,
because of the way you edit files with it. Just like Word, you have to
select text prior to deleting or changing it in any way. Audacity is free
and easy to use, and is very friendly with Jaws. You say the first 4 minutes
of your file is blank? No problem. With audacity, all you have to do, is
find the spot in the file where the audio starts, press the left bracket to
put a placemarker there, press shift J to select everything from the
placemarker back to the left, then press control K to delete the silence.
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks


-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:02 AM
To: all-audio@groups.io
Subject: [all-audio] re taking the blank bit out of my audio file

hi all,
i have an audio file,
the first 4 mins of it is blank,
i want to take this out, using some kind of software thats jaws friendly,
without loosing any quality,
if someone can help me, and tell me how to do it that would be most
grateful.
regards
stewart


Re: re taking the blank bit out of my audio file

Brian Olesen
 

HI,
And even if you're not a musician Reaper is the king!
It's not free, but you can evaluate it for hmm I think about 3 months.
www.reaper.fm

Brian

-----Oprindelig meddelelse-----
Fra: all-audio@groups.io <all-audio@groups.io> På vegne af Mike Bernard via
groups.io
Sendt: 11. april 2022 16:42
Til: all-audio@groups.io
Emne: Re: [all-audio] re taking the blank bit out of my audio file

John's right. GoldWave is good too, although I believe you have to purchase
that one as aposed to Audacity which is free. GoldWave from what I can tell
from listening to other tutorials that people have made with it, it seems
user friendly with jaws too. Here's the link for that one too:
http://goldwave.com
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:28 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi mike thanks fore this can u send me a link fore the software?
i've seen u on the spl group.
from stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:18 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Good morning Steward:
Yes, there's a simple way to do just that. Are you familiar with the audio
editor Audacity? I often refer to it as a word document in audio format,
because of the way you edit files with it. Just like Word, you have to
select text prior to deleting or changing it in any way. Audacity is free
and easy to use, and is very friendly with Jaws. You say the first 4 minutes
of your file is blank? No problem. With audacity, all you have to do, is
find the spot in the file where the audio starts, press the left bracket to
put a placemarker there, press shift J to select everything from the
placemarker back to the left, then press control K to delete the silence.
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks


-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:02 AM
To: all-audio@groups.io
Subject: [all-audio] re taking the blank bit out of my audio file

hi all,
i have an audio file,
the first 4 mins of it is blank,
i want to take this out, using some kind of software thats jaws friendly,
without loosing any quality,
if someone can help me, and tell me how to do it that would be most
grateful.
regards
stewart


Re: re taking the blank bit out of my audio file

Mike Bernard
 

Unfortunately I don't have goldWave. But hopefully someone on the list who
uses it can help.
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 11:00 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi ok have loaded my file in goldwave,
its the first time i have used this software,
how do i take the first 4 mins out?
stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:41 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


John's right. GoldWave is good too, although I believe you have to purchase
that one as aposed to Audacity which is free. GoldWave from what I can tell
from listening to other tutorials that people have made with it, it seems
user friendly with jaws too. Here's the link for that one too:
http://goldwave.com
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks



-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:28 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi mike thanks fore this can u send me a link fore the software?
i've seen u on the spl group.
from stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:18 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Good morning Steward:
Yes, there's a simple way to do just that. Are you familiar with the audio
editor Audacity? I often refer to it as a word document in audio format,
because of the way you edit files with it. Just like Word, you have to
select text prior to deleting or changing it in any way. Audacity is free
and easy to use, and is very friendly with Jaws. You say the first 4 minutes
of your file is blank? No problem. With audacity, all you have to do, is
find the spot in the file where the audio starts, press the left bracket to
put a placemarker there, press shift J to select everything from the
placemarker back to the left, then press control K to delete the silence.
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks


-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:02 AM
To: all-audio@groups.io
Subject: [all-audio] re taking the blank bit out of my audio file

hi all,
i have an audio file,
the first 4 mins of it is blank,
i want to take this out, using some kind of software thats jaws friendly,
without loosing any quality,
if someone can help me, and tell me how to do it that would be most
grateful.
regards
stewart


Re: re taking the blank bit out of my audio file

Mike Bernard
 

Sure.
Here ya go:
https://www.dropbox.com/s/txpwyvns15f4zcd/Ninite%20Audacity%20Installer.exe?
dl=0
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks

-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:51 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi mike
can u send me a dropbox link fore the .exe file?
from stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:36 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Oh Hi! Yeah now that I think of it, I've seen you over there too. I often
use Audacity for my production work with Sonic Radio. You can get a copy of
the software from ninite.com. Here's the link:
http://www.ninite.com
Just use the F key to scroll down by control, and eventually you'll get to
the Audacity program. You see, on Ninite, they've got a bunch of checkboxes
for the different files and all you have to do is check the box for the
software file you want, then scroll down to the bottom where you'll find the
Get your ninite button. I've used these guys to obtain software lots of
times and they're very user-friendly with jaws. Another nice thing about
them is that you can easily download stuff whithout having to worry about
those annoying toolbars and other junk that tries to sneak its way into our
computers.


Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks



-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:28 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi mike thanks fore this can u send me a link fore the software?
i've seen u on the spl group.
from stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:18 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Good morning Steward:
Yes, there's a simple way to do just that. Are you familiar with the audio
editor Audacity? I often refer to it as a word document in audio format,
because of the way you edit files with it. Just like Word, you have to
select text prior to deleting or changing it in any way. Audacity is free
and easy to use, and is very friendly with Jaws. You say the first 4 minutes
of your file is blank? No problem. With audacity, all you have to do, is
find the spot in the file where the audio starts, press the left bracket to
put a placemarker there, press shift J to select everything from the
placemarker back to the left, then press control K to delete the silence.
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks


-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:02 AM
To: all-audio@groups.io
Subject: [all-audio] re taking the blank bit out of my audio file

hi all,
i have an audio file,
the first 4 mins of it is blank,
i want to take this out, using some kind of software thats jaws friendly,
without loosing any quality,
if someone can help me, and tell me how to do it that would be most
grateful.
regards
stewart


Re: re taking the blank bit out of my audio file

stewartross
 

hi ok have loaded my file in goldwave,
its the first time i have used this software,
how do i take the first 4 mins out?
stew

----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:41 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


John's right. GoldWave is good too, although I believe you have to purchase
that one as aposed to Audacity which is free. GoldWave from what I can tell
from listening to other tutorials that people have made with it, it seems
user friendly with jaws too. Here's the link for that one too:
http://goldwave.com
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks



-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:28 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi mike thanks fore this can u send me a link fore the software?
i've seen u on the spl group.
from stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:18 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Good morning Steward:
Yes, there's a simple way to do just that. Are you familiar with the audio
editor Audacity? I often refer to it as a word document in audio format,
because of the way you edit files with it. Just like Word, you have to
select text prior to deleting or changing it in any way. Audacity is free
and easy to use, and is very friendly with Jaws. You say the first 4 minutes
of your file is blank? No problem. With audacity, all you have to do, is
find the spot in the file where the audio starts, press the left bracket to
put a placemarker there, press shift J to select everything from the
placemarker back to the left, then press control K to delete the silence.
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks


-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:02 AM
To: all-audio@groups.io
Subject: [all-audio] re taking the blank bit out of my audio file

hi all,
i have an audio file,
the first 4 mins of it is blank,
i want to take this out, using some kind of software thats jaws friendly,
without loosing any quality,
if someone can help me, and tell me how to do it that would be most
grateful.
regards
stewart


Re: re taking the blank bit out of my audio file

stewartross
 

hi mike
can u send me a dropbox link fore the .exe file?
from stew

----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:36 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Oh Hi! Yeah now that I think of it, I've seen you over there too. I often
use Audacity for my production work with Sonic Radio. You can get a copy of
the software from ninite.com. Here's the link:
http://www.ninite.com
Just use the F key to scroll down by control, and eventually you'll get to
the Audacity program. You see, on Ninite, they've got a bunch of checkboxes
for the different files and all you have to do is check the box for the
software file you want, then scroll down to the bottom where you'll find the
Get your ninite button. I've used these guys to obtain software lots of
times and they're very user-friendly with jaws. Another nice thing about
them is that you can easily download stuff whithout having to worry about
those annoying toolbars and other junk that tries to sneak its way into our
computers.


Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks



-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:28 AM
To: all-audio@groups.io
Subject: Re: [all-audio] re taking the blank bit out of my audio file

hi mike thanks fore this can u send me a link fore the software?
i've seen u on the spl group.
from stew
----- Original Message -----
From: "Mike Bernard via groups.io" <mbern6516@...>
To: <all-audio@groups.io>
Sent: Monday, April 11, 2022 3:18 PM
Subject: Re: [all-audio] re taking the blank bit out of my audio file


Good morning Steward:
Yes, there's a simple way to do just that. Are you familiar with the audio
editor Audacity? I often refer to it as a word document in audio format,
because of the way you edit files with it. Just like Word, you have to
select text prior to deleting or changing it in any way. Audacity is free
and easy to use, and is very friendly with Jaws. You say the first 4 minutes
of your file is blank? No problem. With audacity, all you have to do, is
find the spot in the file where the audio starts, press the left bracket to
put a placemarker there, press shift J to select everything from the
placemarker back to the left, then press control K to delete the silence.
Mike

Do you like to shake your groove with disco,? New Wave, or today's slammin
hits? I play em all.! Join me, Mike B every Wednesday night from 7 to 10 pm
on SonicRadio.rocks. We'll have a blast!
www.sonicradio.rocks


-----Original Message-----
From: all-audio@groups.io [mailto:all-audio@groups.io] On Behalf Of
stewartross via groups.io
Sent: Monday, April 11, 2022 10:02 AM
To: all-audio@groups.io
Subject: [all-audio] re taking the blank bit out of my audio file

hi all,
i have an audio file,
the first 4 mins of it is blank,
i want to take this out, using some kind of software thats jaws friendly,
without loosing any quality,
if someone can help me, and tell me how to do it that would be most
grateful.
regards
stewart

161 - 180 of 4329